Petrolatum Anticorrosion Tape No.59 Series
For antirust/anticorrosion of irregular shapes. Petrolatum anticorrosion tape perfectly sticks to any shape.
No.59 Series uses a nonwoven fabric base impregnated with petrolatum-based compound made from petroleum, which has good elasticity, and closely sticks to any shape. It forms excellent antirust/anticorrosion layer with just a simple work of winding or applying, and smoothing.
Features
- It brings out superior antirust/anticorrosion effect by shielding the metal surface against air and water.
- Antirust/anticorrosion petrolatum changes red rust to black rust and stabilizes the material.
- With its high-powered chemical-resistance, it prevents corrosion by acid, alkali, and bacteria.
- Superior adhesive power of petrolatum continues forming of antirust/anticorrosion layer without having evaporation or hardening.
- No special skill is needed, and it is easy to work with.
- It perfectly adheres to any kind of complicated shape.
- No need to heat. It forms anticorrosion layer by just winding and stroking.
Properties
| Property | Unit | Measured value | |||
| No.59L | No.59H | No.59HN | No.59HT | ||
| Thickness | mm | 1.1 | 1.1 | 1.1 | 1.1 |
| Weight | kg/m2 | 1.4 | 1.4 | 1.5 | 1.4 |
| Elongation | % | 15.0 | 15.0 | 15.0 | 15.0 |
| Water absorption ratio | 0.1 | 0.1 | 0.1 | 0.1 | |
| Tensile strength | N/25mm Width | 78.0 | 78.0 | 78.0 | 78.0 |
| Adhesive strength *1 | S | 60 or more | 60 or more | 60 or more | 60 or more |
| Volume resistivity | Ωcm | 1014 | 1014 | 1014 | 1014 |
| Resistance to thermal melting *2 | ℃ | ~+55 | ~+65 | ~+65 | ~+90 |
[Remarks]
The above values are sample measured values, not the guaranteed performance.
*1 Adhesive strength test method
Affix a specimen of 25mm x 25mm on stainless steel plate with test temperature of 20℃, press the specimen with 5kg roller one pass back and forth, then apply 100g load and measure time until it falls down.
*2 Resistance to Thermal Melting Test Method
Wind the tape around a small pipe and set it horizontally in a homoiothermal chamber at designated temperature. After 24 hours, any dropping of the tape compound should not be found.
Line-up
[No.59L,No.59H]
For underground installation, underwater installation, etc.
[No.59HN]
For area that needs flame retardancy.
[No.59HT]
For high temperature section that needs heat-resistance. (Thermal melting resistant temperature: 90℃)
*Thermal melting resistant temperature means the drop temperature of the compound.
Applications
- For various pipes (straight pipes, flanges, elbows, T-tubes, etc.)
- For steel structures with complicated shape.
- For steel structure in seawater and tidal zone. Taping is available after application of a primer of underwater paste. With appropriate covering, it forms long-lasting antirust/anticorrosion coating.
