Permatex Battery Protector and Sealer 141g

Permatex Battery Protector and Sealer 141g

Permatex Battery Protector & Sealer is an aerosol product for
sealing and coating the terminals of a battery and eliminating
the formation of acid salt corrosion that is typically found when
terminals are untreated.

PRODUCT BENEFITS

• Prevents terminal corrosion
• Prevents battery drain
• Increases battery life
• Improves electrical flow

TYPICAL APPLICATIONS

• Batteries
• Cables
• Terminals

DIRECTIONS FOR USE

1.  Provide adequate ventilation.
2. Clean parts to be treated with Permatex Battery
   Cleaner.
3. Shake can with ball agitator for one minute. For best
   results, aerosol can should be at room temperature
   before spraying.
4. Holding can 8 to 10 inches from the surface to be
   coated, press the nozzle and discharge the product onto
   the terminal areas. The product discharges as a heavy
   film.
5. For best results, apply two light coats.

Note: Enough aerosol product to coat terminals on 25
batteries

For Cleanup

1. Turn can upside-down and spray to clear nozzle.
2. Clean hands with Permatex brand hand cleaners

GENERAL INFORMATION

This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).

STORAGE

Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8_ to 28_C
(46_ to 82_F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range.