Permatex 80697 Copper Spray-A-Gasket Sealant 255G



Permatex 80697 Copper Spray-a-gasket Hi-temp Sealant 255g

Permatex Copper Spray-A-Gasket Hi-Temp Sealant is an
aerosol product formulated as a sealant which helps dissipate
heat, prevents gasket burnout and improves heat transfer
  • Contains metallic copper to improve heat transfer and
    eliminate hot spots
  • Remains tacky to allow gasket repositioning
  • Works in temperature from -50°F and 500°F
  • Resists shop fluids, including gasoline
  • Fills surface imperfections
  • May be used in any high temperature application where
    heat dissipation is required

  1. Provide adequate ventilation.
  2. Surfaces should be free of oil, dirt and grease.
  3. Mask areas that should not be coated.
  4. Shake can with ball agitator for one minute. For best
    results, aerosol can should be at room temperature
    before spraying.
  5. Holding can 8 to 10 inches from the surface to be
    coated, press the nozzle and discharge the product
    uniformly. Apply to both sides of gasket. DO NOT
    SPRAY into engine compartment Avoid overspray.
    Allow solvent to evaporate before assembly.

For Cleanup

  1. Turn can upside-down and spray to clear nozzle.
  2. Clean hands with Permatex brand hand cleaners

Note: Aerosol product will coat 10 to 12 standard gaskets

This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).

Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8° to 28°C
(46° to 82°F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range.
Read More Read Less
Products dan Adhesive / Sealant



Products Brand

You may also like