Permatex 80073 Belt Dressing & Conditioner



Permatex 80073 120DA Belt Dressing & Conditioner

Permatex Belt Dressing & Conditioner is a specially
formulated, high quality belt dressing that is designed to
eliminate squeaks, aid in power transfer and increase belt life.
The product penetrates the cord fibers to restore pliability and
flexibility. Prevents belt slippage due to heat, cold, dampness,
dust and glazing.
  • Increase pulling power of belt
  • Protects belt from deterioration due to oxidation and heat
  • Remains soft, does not harden or glaze
  • Easy application, aerosol spray for maximum coverage,
    extension tube for hard to reach areas
  • VOC compliant
  • V-belts or flat belts of rubber, leather or fabric
  • Automotive
  • Farm equipment
  • Industrial belt drives
Note: Not recommended for use on serpentine belts

  1. Provide adequate ventilation.
  2. Shake can thoroughly before use. Note: There is no ball
    agitator inside the can. For best results, aerosol can
    should be at room temperature before spraying.
  3. Attach extension tube
  4. While engine is running, spray lightly on inner working
    surface of belt near smallest or uppermost pulley. Allow
    belt to run for several minutes to condition and cure
    dressing . Reapply as needed.
    Caution: Do not come into contact with moving parts.
  5. Do not apply an excess, a uniform, thin coat is sufficient.
    If the liquid runs off, it indicates an over-application

Note: Prolonged or recurring squeaking is an indication that
the belt should be replaced due to excessive wear and
For Cleanup

  1. Turn can upside-down and spray to clear nozzle.
  2. Clean hands with Permatex brand hand cleaners.


This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).

Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8_ to 28_C
(46_ to 82_F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range.
Read More Read Less
Products dan Grease / Lubricant



Products Brand

You may also like