Permatex 80003 Form-A-Gasket No. 1 Sealant 11oz



Permatex 80003 Form-A-Gasket No. 1 Sealant 11oz (Fast Drying)

Permatex Form-A-Gasket® No. 1 Sealant is a reddish brown,
viscous paste with a characteristic alcoholic odor. It is a fast
drying paste that cures to a hard, semi flexible seal through
solvent evaporation. It seals flanges, fittings, connections and
assembles against leakage. Improves gasket seal in
permanent and rigid assemblies.
  • Extends gasket life
  • Prevents leaks
  • Fast drying
  • Hard setting
  • Freeze plugs
  • Automotive and industrial sealant for permanent
  • Threaded connections
  • Manifold gaskets
  • Air ducts
  • Boilers
  • Pipe fittings
  • Plumbing connections

  1. Remove all previous material from mating surfaces.
    Permatex Gasket Remover is recommended for most
    materials, not for plastics or painted surfaces.
  2. For best results, clean and dry all surfaces with a
    residue-free solvent, such as Permatex Brake and
    Parts Cleaner.
  3. Remove cap, puncture tube or cartridge seal and
    attach extension nozzle (if provided).
  4. When used as a gasket dressing, spread product with
    a spatula to a uniform film on one side of gasket and
    then position it on the assembly. Coat the second side
    of gasket and re-assemble.
  5. Assembly is operational after 2 hours, full cure is
    effective after 24 hours.

For Cleanup

  1. The product can be removed from metal surfaces with
    isopropyl alcohol. If the sealant has been dried for a
    long time or at high temperatures, cover the sealant
    with alcohol and allow to soften overnight.
  2. Clean hands with Permatex brand hand cleaners.


Permatex Form-A-Gasket® No. 1 Sealant once applied,
develops a hard, semi-flexible sealant by solvent evaporation.
Dry times will vary with temperature, humidity and gap.
Chemical / Solvent Resistance

The product retains effective properties in contact with water,
ethylene glycol, non-ethanol containing gasoline, motor oil,
transmission fluid and sea water.

This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).

Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8 to 28C
(46 to 82F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range. To prevent
contamination of unused product, do not return any material to
its original container.
Read More Read Less
Products dan Adhesive / Sealant



Products Brand

You may also like