Mr Mckenic 9 in 1 Technology Oil

Mr Mckenic 9 in 1 Technology Oil 450gram

Mr McKenic 9-in-1 Technology Oil is a multi-functional product with a wide variety of applications with its lubricating, corrosion-inhibiting, penetrating and cleaning properties. An effective solution in many situations from lubricating moving parts to maintenance of equipment, Mr McKenic® – 9-in-1 Technology Oil is an essential product in every tool box.
Technically formulated with a low surface tension, Mr McKenic® – 9-in-1 Technology Oil has the ability to penetrate deeply and quickly to break up hardened grease, rust and dirt that cause friction. This excellent penetrating action frees seized mechanisms swiftly, leaving a lubricating film that further reduces frictional resistance to smoothen motion. Hence, effectively eliminates squeaks without any sticky residues.
In addition to the lubricating property, this hydrophobic film of Mr McKenic® – 9-in-1 Technology Oil displaces moisture from wet components, helps to reduce equipment servicing downtimes and prevents any potential electrical failure when water comes into contact with electrical connections.
This protective layer contains a package of corrosion inhibitors which makes Mr McKenic® – 9-in-1 Technology Oil an excellent anti-rust agent. Frequent applications will prevent corrosion from setting in, minimize effects of wear & tear or overheating of equipments and hence, in the long run, helps extend the lifespan of machinery.

Product features:

• Low Surface Tension
• High Penetration Power
• Displaces Moisture & Prevents Short-Circuit
• Prevents & Remove Rust
• Lubricates
• Prevents Overheating
• Non-Flammable
• Odourless
• Withstands Temperature
• Cleans Stubborn Stains

Direction for use:

1. Shake Can well before use.
2. Test plastic surface before use.
3. Switch off power supply before spraying onto the electrical or electronic components.
4. Apply Mr McKenic®- Contact Cleaner (Fast Dry) onto the area to be treated.
5. Attach the extension tubing to reach inaccessible areas.
6. Brush or dust away the contaminants using a brush if necessary.
7. Re-apply daily or weekly depending on application.

FIRST AID MEASURES

• Eye contact : Immediately flush eyes with large amounts of water for at least 15 minutes while
  holding the eyelids open. If redness, swelling, pain and blister occur, transport to the
  nearest medical facility for additional treatment.
• Skin contact : Remove contaminated clothing. Flush exposed area with large amount of water for at
  least 15 minutes followed by washing with soap. If redness, swelling, pain and blister
  occur, transport to the nearest medical facility for additional treatment.
• Inhalation : Remove to open area for fresh air. If rapid recovery does not occur, transport to the
  nearest medical facility for additional treatment.
• Ingestion : If swallowed, do not induce vomiting; transport to nearest medical facility for additional
  treatment. If vomiting occurs spontaneously, keep head below hips to prevent
  aspirations.

Most Important Symptoms/Effects, Acute and Delayed:
Eye irritation signs and symptoms may include burning sensation, redness, swelling and/or blurred vision. Skin irritation signs and symptoms may include a burning sensation, redness, swelling, and/or blisters. Defatting dermatitis signs and symptoms may include burning sensation and/or a dried/ cracked appearance. Respiratory irritation signs and symptoms may include burning sensation of the nose and throat, coughing and difficulty in breathing. If materials enter lungs, signs and symptoms may include coughing, chocking, wheezing, difficulty in breathing, chest congestion, shortness of breath and fever.

ACCIDENTAL RELEASE MEASURES

• Personal Precautions and Protective Equipment : Refer to protective measures listed in sections 7 and 8. Prevent further leakage or spillage if safe to do so. Keep away from open flames, hot surfaces and sources of
  ignition. Keep away from incompatible products. Isolate the area. Cover the spreading liquid with foam in order to slow down the evaporation. Ventilate the area.
• Environmental Precautions : Prevent discharges into the environment (sewers, rivers, soils). Immediately notify the appropriate authorities in case of discharge.
• Method for Cleaning Up & Containment : If possible, dam large quantities of liquid with sand or earth. Collect the product with suitable means. Place everything into a closed, labeled container compatible with the
  product. Flush with plenty of water. Prevent product from entering drains. Treat recovered material as described in the section "Disposal considerations”.
• Emergency Procedures : Shut off leaks, if possible without personal risks. Remove all possible ignitions in the surrounding area. Use appropriate containment to avoid environmental contamination.
  Prevent from spreading or entering drains, ditches or rivers by using sand, earth or
  other appropriate barriers. Take precautionary measures against static discharge.
  Ensure electrical continuity by bonding and grounding (earthing) all equipment. Monitor
  area with combustible gas indicator.

HANDLING AND STORAGE

• Precautions for Safe Handling: Use proper bonding and grounding (earthing) all equipment. Electrostatic discharge may cause fire. Prevent small spills and leakage to avoid slip hazard. Avoid contact with skin.
• Conditions for Safe Storage: Keep container dry. Keep in a cool, well-ventilated place. Ground all equipment containing material. Keep container tightly closed. Combustible materials should be stored away from extreme heat and away from strong oxidizing agents.