Loctite Lb8060 Thread Sealing Multi-purpose Anaerobic Gel 50ml

Loctite Lb8060 Thread Sealing Multi-purpose Anaerobic Gel 50ml

• Storage Temperature : 46 - 69 °F
• Color : Silver
• Curing Type : Non-curing
• Application : Lubrication

 

LOCTITE® LB 8060 is a silver colored, heavy-duty, high temperature, anti-seize naphthenic oil thread lubricant in a stick form. Its smooth texture is suitable for protecting fine threads, snug slip fits or other closely mated parts. It is used to lubricate and permit easy disassembly of assemblies exposed to high temperatures. It is typically used in applications up to +1,598 °F (+870 °C).

• Thread lubricant in a stick form
• Suitable for protecting fine threads, snug slip fits or other closely mated parts
• Used to lubricate and to permit easy disassembly of assemblies exposed to high temperatures

LOCTITE®
LB 8060™ is a heavy-duty, high temperature,
anti-seize thread lubricant. Its smooth texture makes it suitable
for protecting fine threads, snug slip fits or other closely mated
parts. This product is used to lubricate and to permit easy
disassembly of assemblies exposed to high temperatures,
such as boiler and oven parts, jet engines, and industrial
turbines. This product is typically used in applications up to 870
°C.

TYPICAL PERFORMANCE

An anti-seize lubricant used on a bolt helps to develop greater
clamp load for the same torque compared to an unlubricated
bolt. An additional benefit is greater uniformity in clamp load
among a series of bolts

GENERAL INFORMATION

This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected
with a sealant for chlorine or other strong oxidizing
materials.
For safe handling information on this product, consult the
Safety Data Sheet (SDS).

Directions for use

1. For best performance part surfaces should be clean and
   free of grease.
2. Apply a light coating to parts requiring lubrication,
   assemble.
3. Wipe away any excess compound.
4. CAUTION: LOCTITE®
   LB 8060™ is not a high-speed
   load carrying lubricant and should not be used on ball or
   roller bearings, or on parts where lubrication is critical.

Loctite Material Specification

LMS dated November-11, 2002. Test reports for each batch
are available for the indicated properties. LMS test reports
include selected QC test parameters considered appropriate to
specifications for customer use. Additionally, comprehensive
controls are in place to assure product quality and
consistency. Special customer specification requirements may
be coordinated through Henkel Quality.

Storage

Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
Corporation cannot assume responsibility for product which
has been contaminated or stored under conditions other than
those previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representative.