Loctite Lb 8801 Silicone Lubricant 150ml

Loctite Lb 8801 Silicone Lubricant 150ml

• Storage Temperature : 46 - 69 °F
• Color : Translucent
• Curing Type : Non-curing
• Application : Lubrication

 

LOCTITE® LB 8801 is a translucent, non-curing silicone grease paste that seals, lubricates, protects, waterproofs and electrically insulates metal, rubber and plastic parts. Useful as a stopcock lubricant, plug or ball valve lubricant, valve stem packing lubricant and protector for electrical contacts. It has excellent fluid resistance to water based fluids, alcohols, mineral- and vegetable oils.

• Can be used as a moisture barrier for electrical contacts, a rubber and plastic lubricant, a mold release agent and a packing lubricant for shafts and valve stems
• Also protects electrical connections against water infiltration, arcing and keeps moisture from forming a conductive film on electric mounts and insulators
• May be applied by brushing, spraying or dabbing the product on the surface to be lubricated or sealed

LOCTITE®
LB 8801 is a non-curing silicone paste that seals,
lubricates, protects, waterproofs, and electrically insulates
metal, rubber, and plastic parts. Use is as a moisture barrier for
electrical contacts, a rubber and plastic lubricant, a mold
release agent, and a packing lubricant for shafts and valve
stems. It is useful as a stopcock lubricant, plug or ball valve
lubricant, valve stem packing lubricant, and protector for
electrical contacts. It also protects electrical connections
against water infiltration, acring, and keeps moisture from
forming a conductive film on electric mounts and insulators.
LOCTITE®
LB 8801 has excellent fluid resistance to water
based fluids, alcohols, mineral oils and vegetable oils.

GENERAL INFORMATION

This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Safety Data Sheet (SDS).

Directions for use:

1. LOCTITE®
   LB 8801 may be applied by brushing, spraying, or
   dabbing the product on the surface to be lubricated or sealed

Loctite Material Specification

LMS dated August-28, 2005. Test reports for each batch are available for the indicated properties. LMS test reports include
selected QC test parameters considered appropriate to
specifications for customer use. Additionally, comprehensive
controls are in place to assure product quality and
consistency. Special customer specification requirements may
be coordinated through Henkel Quality.

Storage

Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
Corporation cannot assume responsibility for product which
has been contaminated or stored under conditions other than
those previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representative.