Loctite Lb 8012 Anti-seize Moly Paste Lubricant 453.6g



Loctite Lb 8012 Anti-seize Moly Paste Lubricant 453.6g

  • Color : Black
  • Curing Type : Non-curing
  • Application : Lubrication

LOCTITE® LB 8012 is a black, metal-free anti-seize lubricant with MoS₂ and rust inhibitors in a brush top form. Formulated to protect assemblies during running-in periods, it resists high static loads and the MoS₂ paste ensures maximum lubricity. It has an NLGI grade of 1 and is resistant to temperatures up to +400°C.

  • Metal-free
  • Protects assemblies during running-in period
  • Resists high static loads
  • MoS₂ paste insures maximum lubricity
  • NLGI Grade 1
  • Temperature resistant to +400°C.
LB 8012 contains 65% molybdenum disulfide for
maximum lubricity. It is a heavy, black paste with unsurpassed
lubricating qualities. Machine tool marks and other irregularities
are reduced to a mirror-smooth finish by its lubricating action.
LB 8012 reduces friction on threaded fasteners,
including bolts, nuts and studs. The low and uniform friction
coefficient of 0.06 creates reliable assembly conditions.
Lubricant stays in place through heat, load and vibration to
ensure a trouble-free disassembly. For the ultimate in low
friction solid lubrication: press fit - no binding, no chatter or
stick-slip, low force; threaded fasteners - higher clamping for
torque, less torque for same clamping, ease of removal (antiseize); slip-fit - easy assembly, disassembly, ready alignment;
metalworking - drawing, stamping, coining, extruding, forging -
lower friction, eliminates stratching, galling, metal pick-up,
lengthens die life; splines - reduces wear and binding; gears -
stands up under high static or slow-moving loads. This
product is typically used in applications with an operating
range of -29 °C to +400 °C

An anti-seize lubricant used on a bolt helps to develop greater
clamp load for the same torque compared to an unlubricated
bolt. An additional benefit is greater uniformity in clamp load
among a series of bolts.

This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected
with a sealant for chlorine or other strong oxidizing
For safe handling information on this product, consult the
Safety Data Sheet (SDS).
Directions for use

  1. For best performance the mating surface should be clean
    and free of grease.
  2. Note: When grinding or wire brushing, use a dust
    mask. Dust from cleaning threads may contain metal
    compounds. Inhalation may cause lung injury or other
  3. Apply thin coating to mating surfaces, assemble.
  4. Do not use thinner.
  5. Keep container tightly closed when not in use.

Loctite Material Specification

LMS dated October-16, 2000. Test reports for each batch are
available for the indicated properties. LMS test reports include
selected QC test parameters considered appropriate to
specifications for customer use. Additionally, comprehensive
controls are in place to assure product quality and consistency. Special customer specification requirements may
be coordinated through Henkel Quality.

Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
Corporation cannot assume responsibility for product which
has been contaminated or stored under conditions other than
those previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representative.
Read More Read Less
Products dan Grease / Lubricant



Products Brand

You may also like