LOCTITE® 410™ Prism (20G)

0.0

Description

🔧 High-Strength Black CA Adhesive for Metals, Plastics & Rubbers


Key Specifications

Feature Value
Shear Strength 3,200 psi on grit-blasted steel (≈22 MPa) 
Viscosity 3,500 mPa·s (cP) Brookfield
Temperature Range –65 °F to +225 °F (–54 °C to +107 °C)
Fixture Time 30–60 seconds under humidity
Full Cure Time 24 hours at 22 °C
Color/Form Black, solvent-free liquid
Bond Gap Filling Up to ~0.008″ (0.2 mm)

✨ Key Features & Benefits

  • Rubber-Toughened Strength
    Formulated with rubber-modified ethyl cyanoacrylate for increased flexibility, peel resistance, and shock absorption.

  • High Viscosity Black Finish
    Ideal for outdoor enclosure assembly, automotive O-rings, and applications where appearance or opacity are critical.

  • Humidity-Cured, Rapid Fixture
    Sets in 30–60 seconds in typical environmental conditions. Pressure bonding accelerates cure further.

  • Multi-Substrate Compatibility
    Bonds metals, elastomers, plastics—including treated polyolefins when used with primers LOCTITE® SF 770 or SF 7239.

  • Gap-Filling Capability
    Designed to bridge small gaps and irregularities, making it easier to bond rough or abrasive surfaces.

  • Strong, Durable Bond
    Withstands mechanical stress, temperature extremes, and environmental shock—excellent reliability in industrial production .

  • VOC-Compliant & Solvent-Free
    Low VOC (<20 g/L) formula, with no solvent emissions—safer for enclosed or regulated manufacturing environments.


🛠 Ideal Uses

  • OEM Assembly of small to medium-sized parts: sensors, connectors, housings

  • Rubber-to-Metal Bonding: seals, gaskets, hoses

  • Plastic and Polyolefin Bonds (with proper primer)

  • Gap-Filling Joints in electronics, appliances, and automotive components

  • Shock-Resistant Fixings in rugged industrial applications


✅ Best Practice Application Tips

  1. Clean & Degrease Surfaces using recommended cleaners/primers for enhanced adhesion.

  2. Use thin bond lines (<0.05 mm) for the fastest cure.

  3. Clamp or apply pressure during cure for maximum bond strength.

  4. For large gaps or slow cure, apply LOCTITE® activator (e.g., SF 7452), but validate final bond strength.

  5. Remove excess adhesive with nitromethane, acetone, or Loctite cleaning solvents.


🧊 Storage & Safety

  • Store in original, sealed container between 8–21 °C for optimal shelf life; refrigerate when possible 

  • Keep away from heat, sparks, and incompatible materials.

  • Handle with PPE: gloves and eye protection. Refer to SDS for detailed safety, handling, and first aid advice.

Read More Read Less
Adhesive / Sealant dan Products

Categories

Loctite

Products Brand

You may also like