Surface Protective Materials for Metals Plates SPV-S-400X

Sold Out
0.0

Description

Surface protective material for deep drawing of stainless steel.

SPV-S-400X of surface protective films was developed for surface protective during stainless steel processing. Products can be selected in accordance with the shape from simple processing to complex processing.

Features

  • Minimal film floating during drawing; multistep drawing is possible.

Properties

Product No. Thickness [mm]*1 Adhesive strength[N/20mm]
SPV-S-400X 0.045 2.70 *2

[Test method]

  • *1:Nominal thickness
  • *2:Peeling angle: 90°, Peeling speed: 300mm/min

Applications

  • Surface protective during stainless steel deep drawing.

Precautions

  • Avoid sunlight and store at room temperature and moderate humidity.
  • Do not press too strong when applying. This may cause the end of the tape to peel.
  • If applying to surfaces treated with machining oil, degrease the surface carefully. Any remains will be a cause for surface contamination or adhesive residue.
  • For use under severe conditions, please test and evaluate the product thoroughly beforehand.
  • Painting, plating, etching, or gluing the surface after peeling the tape may be troublesome due to the small amount of residue of the adhesive. Please inspect under actual situations thoroughly before application.
  • Painted boards, depending on conditions such as paint baking, may cause the tape to peel uneasily or peel off the paint together. Please evaluate thoroughly beforehand.
  • Surface treated boards such as alumite, depending on treatment conditions, may show different properties (peeling) of SPV. Please evaluate thoroughly beforehand.
  • Especially for applications against natural substrate (marble stone, lumber, etc.) please contact our sales representative in charge.
  • Please note that the surface of the adherend may repel paint or exhibit poor paint adhesion after SPV-S Series are peeled off.
  • When you paint after peeling off the surface protective material, be sure to check the surface washing, pretreatment, or paint baking conditions to ensure the paint adhesion before usage.
  • The above datasheet is a sample observation value under certain testing conditions, not guaranteed performance.
  • The quality, performance, and/or functions of this product will differ according to the conditions of use. Please contact our department in charge for full details of this product.
  • Under severe conditions, this product may show difference between the sample observed values and the actual performance. Please test and evaluate the product thoroughly for your safety and better results.
  • This product and/or its features may change or be discontinued without any prior notice.
  • The intellectual property rights of this document belongs to Nitto Denko Corporation. Please contact our department in charge for usage not in accordance of the intended use. Copying and/or reproducing the document without notice are strictly prohibited. All rights reserved.
Read More Read Less

You may also like