Single-coated adhesive tape with a low outgas and silicone-free* SPA Series
Description
Read More
Read Less
It is ideal for fixing of hole-filling film for electronic equipment such as HDD that are concerned about outgas. It offers excellent converting performance due to minimal adhesive residue.
*Silicone-free:Silicone material is not intentionally used.
Features
- The adhesive tape releases minimal outgas.
- Silicone material is not intentionally used.
- Corrosive ion impurities are almost undetectable.
- Release liner can be peeled smoothly.
- 10 restricted substances by RoHS are not contained.
Properties
Chemical Properties [SPAP3025T2]
SPAP3025T2 | |
Total Outgas Qty. [μg/cm2] | 0.2 |
Siloxane Qty. [ng/cm2] | <0.4 |
Unit: ng/cm2
F- | Cl- | Br- | NO3- | SO42- | PO43- | |
SPAP3025T2 | <0.6 | <1.5 | <3.5 | <4.0 | <3.2 | <8.0 |
[Evaluation Method]
- *Total outgas :
- Device: GC/MS
- Heating conditions: 120℃ x 10 min
- Measurement standard: n-Decane
- Sampling method: Purge and trap headspace analysis
- *Siloxane gas:
- Device: GC/MS
- Heating conditions: 120℃ x 10 min
- Measurement standard: Dimethylsiloxane (D3 to D6)
- Sampling method: Purge and trap headspace analysis
- <0.4: under the measurement limit (0.4ng/cm2)
- *Impurity ions: Device: ion chromatograph
- Ion extraction method: hot water extraction
- Heating conditions: 100℃ x 45 min
Lineup
AL composite base material: silicone-free type
Applications
- For plugging HDD casing holes
Precautions
- Make sure to remove any oils, moisture, dust, etc. from the substrate.
- As this is a pressure-sensitive adhesive, make sure to apply ample pressure after attachment.
- Make sure to smooth out uneven or rough surfaces as much as possible.
- Some materials are difficult to attach to, such as rubber, polypropylene, and polyethylene. Please check this before use.
- A minimum temperature of 10℃ is suitable for attachment. (Initial adhesive strength is reduced at temperatures lower than 10℃ in the winter months, etc.)
- It takes a little time for the tape's original adhesive strength to take full effect, so avoid placing or using the tape in a situation in which a lot of strength is needed until several hours have passed from the time of attachment.
- Do not touch the tape with bare hands once removed from the wrapping.
- When using this product, please avoid contact with materials or tools containing silicone oil, machining oil, or release agents for rolling or metal molds.
[Storage Precautions]
- Make sure to store this product in a box.
- Avoid storing in high-temperature or high-moisture areas. This product should be stored in a cool, dark area away from direct sunlight.
- Please use this tape within 6 months after delivery.
[Safety Precautions]
- Take a careful consideration if this product is adapted to the use, purpose and condition before using.
- The tape may peel in some cases depending on substrate and attachment conditions.
- When using this product in areas that may pose a risk of accident, use together with a different joining method.
Single-coated adhesive tape with a low outgas and silicone-free* SPA Series
Sale price$0.00
Regular price (/)