Permatex 80003 Form-A-Gasket No. 1 Sealant 11oz
Permatex 80003 Form-A-Gasket No. 1 Sealant 11oz (Fast Drying)
Permatex Form-A-Gasket® No. 1 Sealant is a reddish brown,
viscous paste with a characteristic alcoholic odor. It is a fast
drying paste that cures to a hard, semi flexible seal through
solvent evaporation. It seals flanges, fittings, connections and
assembles against leakage. Improves gasket seal in
permanent and rigid assemblies.
- Extends gasket life
- Prevents leaks
- Fast drying
- Hard setting
- Freeze plugs
- Automotive and industrial sealant for permanent
- Threaded connections
- Manifold gaskets
- Air ducts
- Pipe fittings
- Plumbing connections
DIRECTIONS FOR USE
- Remove all previous material from mating surfaces.
Permatex Gasket Remover is recommended for most
materials, not for plastics or painted surfaces.
- For best results, clean and dry all surfaces with a
residue-free solvent, such as Permatex Brake and
- Remove cap, puncture tube or cartridge seal and
attach extension nozzle (if provided).
- When used as a gasket dressing, spread product with
a spatula to a uniform film on one side of gasket and
then position it on the assembly. Coat the second side
of gasket and re-assemble.
- Assembly is operational after 2 hours, full cure is
effective after 24 hours.
- The product can be removed from metal surfaces with
isopropyl alcohol. If the sealant has been dried for a
long time or at high temperatures, cover the sealant
with alcohol and allow to soften overnight.
- Clean hands with Permatex brand hand cleaners.
TYPICAL CURING PERFORMANCE
Permatex Form-A-Gasket® No. 1 Sealant once applied,
develops a hard, semi-flexible sealant by solvent evaporation.
Dry times will vary with temperature, humidity and gap.
Chemical / Solvent Resistance
The product retains effective properties in contact with water,
ethylene glycol, non-ethanol containing gasoline, motor oil,
transmission fluid and sea water.
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8 to 28C
(46 to 82F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range. To prevent
contamination of unused product, do not return any material to
its original container.
This product has no reviews yet.