Loctite SF 7063 Super Clean
Loctite SF 7063 Super Clean, engineered specifically for professional maintenance, repair, and overhaul (MRO) operations, this high-performance solvent-based parts cleaner is the industry standard for preparing surfaces before applying Loctite adhesives and sealants. Unclean or partially contaminated surfaces can compromise cure speeds and final shear strength; using Loctite 7063 ensures a completely clean surface for reliable, high-strength bonds.
Why Engineers Choose Loctite SF 7063
- Zero Residue Formulation: Rapidly evaporates without leaving any film or oily residue behind, preventing bond contamination.
- Heavy-Duty Degreasing: Formulated to penetrate, dissolve, and strip away stubborn greases, oils, lubrication fluids, metal cuttings, and fine particulates from all metal surfaces.
- Optimized for Adhesive Prep: Maximizes the chemical adhesion and curing efficiency of anaerobic threadlockers, retaining compounds, and thread sealants.
- Non-CFC Solvent Base: Uses an advanced, non-chlorinated solvent formulation suitable for heavy-duty commercial-grade applications.
Technical Specifications
Maintain strict engineering compliance on your assembly line with these verified product characteristics:
- Product Name: Loctite SF 7063 (also known as Loctite 7063)
- Application: General-purpose surface cleaner & degreaser
- Viscosity: Very Low
- Color: Clear, Transparent
- Solvent Base: Aliphatic hydrocarbon and alcohol blend (Non-CFC)
- Curing Type: Not applicable (evaporates fully)
- Optimal Storage Temperature: 8 °C to 21 °C (Storage below 8 °C or above 28 °C can adversely affect product properties)
Directions for Industrial Application
- Treat target parts by spraying the surfaces directly or wiping them down with a solvent-soaked paper towel.
- Wipe the wet surfaces with a clean, lint-free cloth to lift and remove heavy contaminants. If necessary, spray again to allow the dissolved contaminants to run off.
- Allow the solvent to fully evaporate from the components. Complete evaporation is critical to avoid solvent entrapment inside the finished bond joint.
- Apply your selected adhesive immediately to the dry components and complete the assembly. Ensure proper protective equipment is worn during application, including compatible gloves.
Frequently Asked Questions
Does Loctite SF 7063 leave any chemical film that could weaken adhesive strength?
No. Loctite SF 7063 is formulated specifically as a zero-residue, highly volatile solvent. It evaporates completely from metal parts, leaving a bare, uncontaminated surface that ensures maximum adhesive contact and optimal cure speeds.
Can I use Loctite 7063 to clean plastic parts or powder-coated surfaces?
Because Loctite SF 7063 is a highly active solvent-based cleaner, it can degrade or attack certain plastics, elastomers, and delicate surface coatings. We highly recommend checking material compatibility on a small, non-critical area before proceeding with widespread application.
Is Loctite SF 7063 compatible with anaerobic threadlockers?
Yes, it is designed precisely for this purpose. Cleaning active or inactive metal joints with Loctite 7063 removes oils and cutting fluids that would otherwise prevent anaerobic adhesives from wetting the surface and curing correctly.
Get a Wholesale Quote on Bulk Orders
Are you looking to secure bulk quantities of Loctite SF 7063 for your manufacturing plant, workshop, or distribution business? Contact Hong Teck Hin, your trusted industrial hardware wholesaler in Singapore. Email our B2B sales team at Contact Us to request a customized bulk price sheet and verify lead times.
Categories
Products Brand
