Loctite LB 8700 Moly 50 Thread Molybdenum Disulfide Petrolatum Compound Anti-seize 454gm
Description
LB 8700 is a thread lubricant formulated from
molydenum disulfide and petrolatum. Use on machine threads,
tapered pipe threads, for press-fit and slip-fit joints. This
product is typically used in applications with an operating
range of -29 °C to +398 °C.
LOCTITE®
LB 8700 is tested to the lot requirements of Military
Specification MIL-PRF-83483. Note: This is a regional
approval. Please contact your local Technical Service Center
for more information and clarification.
An anti-seize lubricant used on a bolt helps to develop greater
clamp load for the same torque compared to an unlubricated
bolt. An additional benefit is greater uniformity in clamp load
among a series of bolts.
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected
with a sealant for chlorine or other strong oxidizing
materials.
For safe handling information on this product, consult the
Safety Data Sheet (SDS).
LMS dated October-19, 2000. Test reports for each batch are
available for the indicated properties. LMS test reports include
selected QC test parameters considered appropriate to
specifications for customer use. Additionally, comprehensive
controls are in place to assure product quality and
consistency. Special customer specification requirements may
be coordinated through Henkel Quality.
Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
Corporation cannot assume responsibility for product which
has been contaminated or stored under conditions other than
those previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representative.
Read More
Read Less
Loctite LB 8700 Moly 50 Thread Molybdenum Disulfide Petrolatum Compound Anti-seize 454gm
- Temperature Resistance : 750 °F
- Storage Temperature : 46 - 69 °F
- Key Substrates : Metal: Steel - Stainless Steel
- Color : Grey
- Curing Type : Non-curing
- Application : Anti-seize
LOCTITE® LB 8700 is a gray, smooth thread lubricant paste formulated from molybdenum disulfide and petrolatum. Can be used on machine threads, tapered pipe threads, for press-fit and slip-fit joints. It is used in applications with an operating range of -20.2 °F to +748.4 °F (-29 °C to +398 °C). It has been tested to meet Military Specification MIL-PRF-83483 (This is a regional approval).
- Smooth thread lubricant paste
- Used on machine threads, tapered pipe threads, for press-fit and slip-fit joints
- Military Specification MIL-PRF-83483 (This is a regional approval)
LB 8700 is a thread lubricant formulated from
molydenum disulfide and petrolatum. Use on machine threads,
tapered pipe threads, for press-fit and slip-fit joints. This
product is typically used in applications with an operating
range of -29 °C to +398 °C.
MIL-PRF-83483
LOCTITE®
LB 8700 is tested to the lot requirements of Military
Specification MIL-PRF-83483. Note: This is a regional
approval. Please contact your local Technical Service Center
for more information and clarification.
TYPICAL PERFORMANCE
An anti-seize lubricant used on a bolt helps to develop greater
clamp load for the same torque compared to an unlubricated
bolt. An additional benefit is greater uniformity in clamp load
among a series of bolts.
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected
with a sealant for chlorine or other strong oxidizing
materials.
For safe handling information on this product, consult the
Safety Data Sheet (SDS).
Directions for use:
- Use as paste directly from container.
- Before or during assembly, wipe or brush onto threads
and other joint surfaces needing protection. - Use full strength. Do not thin.
Loctite Material Specification
LMS dated October-19, 2000. Test reports for each batch are
available for the indicated properties. LMS test reports include
selected QC test parameters considered appropriate to
specifications for customer use. Additionally, comprehensive
controls are in place to assure product quality and
consistency. Special customer specification requirements may
be coordinated through Henkel Quality.
Storage
Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
Corporation cannot assume responsibility for product which
has been contaminated or stored under conditions other than
those previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representative.
Storage
Loctite LB 8700 Moly 50 Thread Molybdenum Disulfide Petrolatum Compound Anti-seize 454gm
Sale price$86.00
Regular price (/)
Products and Grease / Lubricant
Categories
Loctite
Products Brand