Loctite Lb8014 Food-grade Brush Compound Anti-seize White 226.8g



Loctite Lb8014 Food-grade Brush Compound Anti-seize White 226.8g

  • Temperature Resistant : +400°C
  • Color : White
  • Curing Type : Non-curing
  • Application : Lubrication

LOCTITE® LB 8014 is a white, metal-free, food grade lubricant and anti-seize made from white oil and extreme pressure (EP) additives. It prevents friction, seizing and galling in stainless steel and other metal parts. It is temperature resistant to +400°C, has a 0 NLGI grade and is H1 NSF Registered; No: 123004.

  • Food grade lubricant and anti-seize
  • Metal-free
  • Temperature resistant to +400°C
  • NLGI Grade 0
  • Prevents friction, seizing and galling in stainless steel and other metal parts
  • H1 NSF Reg. No.: 123004
LB 8014™ prevents seizing, galling, friction, and
wear on threaded joints and other metal-to-metal surfaces. It is
a combination of white lubricating solids and extreme pressure
lubricating agents in an aluminum gelled white oil. Typical
applications include pipe joints, nuts, bolts and studs, flange
gaskets, slip-fit, press-fit and keyed shafts, and metal-to-metal
contact involving stainless steel and other stainless alloys. It is
used in industrial food industries such as meat and poultry
packing plants, dairy products processing plants, canning
plants, grain processing plants, sugar processing plants,
bakeries, beverage plants, breweries, hospitals, and other
general plant maintenance. This product is typically used in
applications with an operating range of -29 °C to +400 °C.
NSF International

Registered to NSF Category H1 for use as a lubricant with
incidental food contact in and around food processing areas.
Note: This is a regional approval. Please contact your local
Technical Service Center for more information and clarification

This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected
with a sealant for chlorine or other strong oxidizing
For safe handling information on this product, consult the
Safety Data Sheet (SDS).
Directions for use

  1. . For best performance the mating surface should be clean
    and free of grease.
  2. Apply thin coating to threads and flats of nuts and bolts,
  3. Use full strength. Do not thin.

Loctite Material Specification

LMS dated October -16, 2000. Test reports for each batch are
available for the indicated properties. LMS test reports include
selected QC test parameters considered appropriate to
specifications for customer use. Additionally, comprehensive
controls are in place to assure product quality and
consistency. Special customer specification requirements may
be coordinated through Henkel Quality.

Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
Corporation cannot assume responsibility for product which
has been contaminated or stored under conditions other than
those previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representative.
Read More Read Less
Products and Grease / Lubricant



Products Brand

You may also like