Loctite C-200 Metal Free H-d Graphite-calcium Fluoride Formulation Anti-seize 453g

0.0

Description

Loctite C-200 Metal Free H/d Graphite/calcium Fluoride Formulation Anti-seize 453g

  • Color : Grey: Dark Grey
  • Curing Type : Air dry with optional heat cure
  • Application : Lubrication
LOCTITE® LB C-200 is a dark gray, smooth, molybdenum-disulfide based solid film, brushable lubricant paste. It is used by manufacturers of military and commercial jet engines. It is used in various industriesand typically used in sliding friction at an operating range of -20.2 °F to +748.4 °F (-29 °C to +398 °C). For anti-seize lubrication, it functions from -20.2 °F to +2,399 °F (-29 °C to +1,315 °C).

  • Resists high temperature
  • Withstands heavy-duty static loads
  • Will not attract dirt or dust
  • Solid film
  • Brushable
LOCTITE®
LB C-200 is a molybdenum-disulfide based solid
film lubricant. It is used by manufacturers of military and
commercial jet engines. In soft paste form, this product brushes
on easily. Typical applications include production, aerospace,
automotive, heavy equipment, and electrical. This product is
typically used in sliding friction at an operating range of -29 °C
to +398 °C. For anti-seize lubrication, LOCTITE®
LB C-200
functions from -29 °C to +1315 °C.
TYPICAL PERFORMANCE

An anti-seize lubricant used on a bolt helps to develop greater
clamp load for the same torque compared to an unlubricated
bolt. An additional benefit is greater uniformity in clamp load
among a series of bolts.
GENERAL INFORMATION

This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet (MSDS).
Directions for use:


  1. May be applied by brushing, dipping or spraying directly to
    clean metal surfaces.
  2. Prior surface treatments -- common metal protecting
    conversion coatings -- can be used to enhance corrosion
    resistance and wear life.

Loctite Material Specification

LMS dated September-13, 1999. Test reports for each batch
are available for the indicated properties. LMS test reports
include selected QC test parameters considered appropriate to
specifications for customer use. Additionally, comprehensive
controls are in place to assure product quality and
consistency. Special customer specification requirements may
be coordinated through Henkel Quality.
Storage

Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
Corporation cannot assume responsibility for product which
has been contaminated or stored under conditions other than
those previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representative.
 
Read More Read Less
Products and Grease / Lubricant

Categories

Loctite

Products Brand

You may also like