Loctite 515 Gasket Eliminator Flange Sealant

Loctite 515 Gasket Eliminator Flange Sealant 50ml

• Tensile Shear Strength : 6 N/mm²
• Temperature : -65 - 300 °F
• Viscosity : 150000 - 375000 mPa.s (cP) Brookfield
• Key Substrates : Metal: Aluminum, Metal: Steel
• Color : Purple
• Curing Type : Anaerobic
• Application : Sealing

 

LOCTITE 515 is a medium strength (6 N/mm² tensile shear strength), medium cure speed, methacrylate-based industrial gasketing product designed for machined, rigid metal flanges. The product, which cures anaerobically, is suitable for gaps up to 0.25 mm. It is used typically as a form-in-place product for pumps, thermostats, compressors, transmission housings and axle covers.

• Ideal for machined metal components
• Perfect seal between components
• For gaps up to 0.25 mm

Storage

Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
Corporation cannot assume responsibility for product which
has been contaminated or stored under conditions other than
those previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representative.