Loctite 294 Acrylic Anaerobic Threadlocker Green 50ml
Description
LOCTITE®
294™ is designed for the locking and sealing of
threaded fasteners. Because of its low viscosity and capillary
action, the product wicks between engaged threads and
eliminates the need to disassemble prior to application. The
product cures when confined in the absence of air between
close fitting metal surfaces and prevents loosening and
leakage from shock and vibration. The product also provides
good threadlocker performance with oil coated fasteners
LOCTITE®
290™ is tested to the lot requirements of Military
Specification Mil-S-46163A. Note: This is a regional approval.
Please contact your local Technical Service Center for more
information and clarification.
The rate of cure will depend on the substrate used. The graph
below shows the breakaway strength developed with time on
M10 zinc phosphate steel nuts & bolts compared to different
materials and tested according to ISO 10964.
The rate of cure will depend on the temperature. The graph
below shows the breakaway strength developed with time at
different temperatures on M10 zinc phosphate steel nuts &
bolts and tested according to ISO 10964.
Where cure speed is unacceptably long, or large gaps are
present, applying activator to the surface will improve cure
speed. The graph below shows the breakaway strength
developed with time on M10 zinc dichromate steel nuts and
bolts using Activator 7471™ and 7649™ and tested according
to ISO 10964.
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials
For safe handling information on this product, consult the
Material Safety Data Sheet (MSDS).
Where aqueous washing systems are used to clean the
surfaces before bonding, it is important to check for
compatibility of the washing solution with the adhesive. In
some cases these aqueous washes can affect the cure and
performance of the adhesive.
This product is not normally recommended for use on plastics
(particularly thermoplastic materials where stress cracking of
the plastic could result). Users are recommended to confirm
compatibility of the product with such substrates.
LMS dated September-25, 1997. Test reports for each batch
are available for the indicated properties. LMS test reports
include selected QC test parameters considered appropriate to
specifications for customer use. Additionally, comprehensive
controls are in place to assure product quality and
consistency. Special customer specification requirements may
be coordinated through Henkel Quality.
Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
Corporation cannot assume responsibility for product which
has been contaminated or stored under conditions other than
those previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representative.
Read More
Read Less
Loctite 294 Acrylic Anaerobic Threadlocker Green 50ml
- Strength : Medium to High
- Viscosity : 35 mPa.s (cP) Brookfield
- Color : Green
- Curing Type : Anaerobic
- Application : Threadlocking
LOCTITE® 294 is a dark green, fluorescent, dimethacrylate ester acrylic threadlocker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need to disassemble prior to application. The product also provides good threadlocker performance with oil coated fasteners.
- Low viscosity and capillary action
- Wicks between engaged threads and eliminates the need to disassemble prior to application
- Provides good threadlocker performance with oil coated fasteners
LOCTITE®
294™ is designed for the locking and sealing of
threaded fasteners. Because of its low viscosity and capillary
action, the product wicks between engaged threads and
eliminates the need to disassemble prior to application. The
product cures when confined in the absence of air between
close fitting metal surfaces and prevents loosening and
leakage from shock and vibration. The product also provides
good threadlocker performance with oil coated fasteners
Mil-S-46163A
LOCTITE®
290™ is tested to the lot requirements of Military
Specification Mil-S-46163A. Note: This is a regional approval.
Please contact your local Technical Service Center for more
information and clarification.
TYPICAL CURING PERFORMANCE
Cure Speed vs. Substrate
The rate of cure will depend on the substrate used. The graph
below shows the breakaway strength developed with time on
M10 zinc phosphate steel nuts & bolts compared to different
materials and tested according to ISO 10964.
Cure Speed vs. Temperature
The rate of cure will depend on the temperature. The graph
below shows the breakaway strength developed with time at
different temperatures on M10 zinc phosphate steel nuts &
bolts and tested according to ISO 10964.
Cure Speed vs. Activator
Where cure speed is unacceptably long, or large gaps are
present, applying activator to the surface will improve cure
speed. The graph below shows the breakaway strength
developed with time on M10 zinc dichromate steel nuts and
bolts using Activator 7471™ and 7649™ and tested according
to ISO 10964.
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials
For safe handling information on this product, consult the
Material Safety Data Sheet (MSDS).
Where aqueous washing systems are used to clean the
surfaces before bonding, it is important to check for
compatibility of the washing solution with the adhesive. In
some cases these aqueous washes can affect the cure and
performance of the adhesive.
This product is not normally recommended for use on plastics
(particularly thermoplastic materials where stress cracking of
the plastic could result). Users are recommended to confirm
compatibility of the product with such substrates.
Directions for use:
For Pre-assembled Threaded Parts with Thru Holes
- Prior to assembly, clean all threads (bolt and hole) with a
LOCTITE®
cleaning solvent and allow to dry. - For Thru Holes, apply several drops of product at screw
and body juncture. - Avoid touching the bottle tip to the metal surface.
- This product is not recommended for pre-assembled
threads in a blind hole.
For Porosity Sealing
- Clean area and apply localized heat to the area to approximately 121°C.
- Allow to cool to approximately 85°C and apply the
product.
For Disassembly
- Remove with standard hand tools.
- In rare instances where hand tools do not work because
of excessive engagement length, apply localized heat to
nut or bolt to approximately 250 °C. Disassemble while
hot.
For Cleanup
- Cured product can be removed with a combination of
soaking in a LOCTITE® solvent and mechanical
abrasion such as a wire brush.
Loctite Material Specification
LMS dated September-25, 1997. Test reports for each batch
are available for the indicated properties. LMS test reports
include selected QC test parameters considered appropriate to
specifications for customer use. Additionally, comprehensive
controls are in place to assure product quality and
consistency. Special customer specification requirements may
be coordinated through Henkel Quality.
Storage
Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
Corporation cannot assume responsibility for product which
has been contaminated or stored under conditions other than
those previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representative.
Loctite 294 Acrylic Anaerobic Threadlocker Green 50ml
Sale price$0.00
Regular price (/)
Products, Cleaner / Remover, and Adhesive / Sealant
Categories
Loctite
Products Brand