Crc Marine 66 Corrosion Preventative Aerosol 300g 6006



Crc Marine 66 Corrosion Preventative Aerosol 300g 6006

CRC Marine 66 is a multi-purpose oil designed to prevent damage due to water and salt atmosphere in marine engines and boating equipment. It forms a thin film that lubricates moving parts for smooth action and protects metals from corrosion caused by humidity and salt air for extended periods. Superior penetrating power breaks through rust and corrosion, loosens rusted parts and keeps them free, displaces moisture out of ignition systems to help start wet engines. CRC Marine 66 increases life span, decreases maintenance and assures improved performance of all marine inboard or outboard motors. It is safe for all metals and alloys and on most painted surfaces, coatings, plastics and rubbers.


  • Corrosion protection
  • Lubricants for smooth action silences annoying squeaks and squeals
  • Multi-purpose oil for the protection of marine engines and boating equipment
  • Penetrates quickly – breaks away rust and corrosion, frees components bonded by dirt


  • Recommended to prevent damage due to water and salt atmosphere in marine engines and boating equipment


  • Brand: CRC
  • Product Type: Corrosion Preventative Aerosol
  • Appearance: Amber Liquid (Aerosol Dispensed)
  • Flammability: Flammable
  • Flash Point: 73℃
  • Specific Gravity: 0.81
  • Weight: 300 g

Disposal requirements vary by state and local regulations. All used and unused product
should be disposed of in conformance with local, state and commonwealth laws and
Special Use Warnings

Aerosol Cans

Do not puncture, incinerate or store above 500C. Exposure to high temperatures may cause
can to burst. Do not place in direct sunlight or near any heat source. Aerosol cans will
conduct electricity. Keep away from all live electrical sources including battery terminals,
solenoids, electrical panels and other electronic components. Failure to observe this warning
may result in serious injury from flash fire and/or electrical shock.

Use only in well ventilated area. Ventilation may be improved by opening a window or door
or providing mechanical assistance. Avoid continuous breathing of vapour and spray mist.
Avoid contact with the skin and eyes. If ventilation is not adequate, respiratory protection
should be worn. For more information regarding short term and long term exposure, review
this product’s Safety Data Sheet.
Read More Read Less



Products Brand

You may also like