Crc 3.36 Heavy Duty Penetrant 300g 3005



Crc 3.36 Heavy Duty Penetrant 300g 3005

CRC 3.36 is a multiple organic inhibitor in a paraffinic oil base that prevents rust and corrosion by displacing and sealing out moisture and by forming a continuous protective barrier against water and oxygen.


  • Easy to remove – removes readily with CRC lectra clean or CRC brakleen
  • Thin invisible film – never dries or becomes brittle, penetrates into the pores and cracks, does not have to be removed before welding/machining/processing


  • Recommended for process manufacturing: Heat treated parts, machined surfaces, finished welds, & in process aluminium extrusions/fabrication
  • For Machining: Fixtures, dies, jigs, shim stock, chucks, drills, die sets, finished goods, gears, ground stock, micrometers, precision instruments
  • For Maintenance: Air tools, locks, hoists, stuck joints, conveyors, scales & lift trucks


  • Brand: CRC
  • Product Type: Penetrant
  • Appearance: Green Translucent Liquid
  • Flammability: Flammable
  • Flash Point: 73℃ TOC 235℃ (Dry Film)
  • Specific Gravity: 0.81 ± 0.02 @ 25°C
  • Weight: 300 g
  • Read all directions and warnings before using
  • Switch of and de-energize before using CRC 3.36
  • Shake can well before using
  • Coat area ensuring total coverage to give maximum protection.
  • For equipment that has been submerged in water, spray liberally on every surface. Allow 2
    to 24 hours to displace water. Flush salt or dirty water prior to spraying.
  • If necessary, repeat application.

Disposal requirements vary by state and local regulations. All used and unused product should
be disposed of in conformance with local, state and commonwealth laws and regulations.
Special Use Warnings

Aerosol Cans

Do not puncture, incinerate or store above 500
C. Exposure to high temperatures may cause
can to burst. Do not place in direct sunlight or near any heat source. Aerosol cans will conduct
electricity. Keep away from all live electrical sources including battery terminals, solenoids,
electrical panels and other electronic components. Failure to observe this warning may result
in serious injury from flash fire and/or electrical shock.

Use only in well ventilated area. Ventilation may be improved by opening a window or door or
providing mechanical assistance. Avoid continuous breathing of vapour and spray mist. Avoid
contact with the skin and eyes. If ventilation is not adequate, respiratory protection should be
worn. For more information regarding short term and long term exposure, review this product’s
Material Safety Data Sheet.
Read More Read Less
Products and Grease / Lubricant



Products Brand

You may also like