Surface Protective Materials for Metals Plates SPV-S-400X
Description
Read More
Read Less
Surface protective material for deep drawing of stainless steel.
SPV-S-400X of surface protective films was developed for surface protective during stainless steel processing. Products can be selected in accordance with the shape from simple processing to complex processing.
Features
- Minimal film floating during drawing; multistep drawing is possible.
Properties
Product No. | Thickness [mm]*1 | Adhesive strength[N/20mm] |
---|---|---|
SPV-S-400X | 0.045 | 2.70 *2 |
[Test method]
- *1:Nominal thickness
- *2:Peeling angle: 90°, Peeling speed: 300mm/min
Applications
- Surface protective during stainless steel deep drawing.
Precautions
- Avoid sunlight and store at room temperature and moderate humidity.
- Do not press too strong when applying. This may cause the end of the tape to peel.
- If applying to surfaces treated with machining oil, degrease the surface carefully. Any remains will be a cause for surface contamination or adhesive residue.
- For use under severe conditions, please test and evaluate the product thoroughly beforehand.
- Painting, plating, etching, or gluing the surface after peeling the tape may be troublesome due to the small amount of residue of the adhesive. Please inspect under actual situations thoroughly before application.
- Painted boards, depending on conditions such as paint baking, may cause the tape to peel uneasily or peel off the paint together. Please evaluate thoroughly beforehand.
- Surface treated boards such as alumite, depending on treatment conditions, may show different properties (peeling) of SPV. Please evaluate thoroughly beforehand.
- Especially for applications against natural substrate (marble stone, lumber, etc.) please contact our sales representative in charge.
- Please note that the surface of the adherend may repel paint or exhibit poor paint adhesion after SPV-S Series are peeled off.
- When you paint after peeling off the surface protective material, be sure to check the surface washing, pretreatment, or paint baking conditions to ensure the paint adhesion before usage.
- The above datasheet is a sample observation value under certain testing conditions, not guaranteed performance.
- The quality, performance, and/or functions of this product will differ according to the conditions of use. Please contact our department in charge for full details of this product.
- Under severe conditions, this product may show difference between the sample observed values and the actual performance. Please test and evaluate the product thoroughly for your safety and better results.
- This product and/or its features may change or be discontinued without any prior notice.
- The intellectual property rights of this document belongs to Nitto Denko Corporation. Please contact our department in charge for usage not in accordance of the intended use. Copying and/or reproducing the document without notice are strictly prohibited. All rights reserved.
Surface Protective Materials for Metals Plates SPV-S-400X
Sale price$0.00
Regular price (/)