Permatex 80011 Form-A-Gasket No. 2 Sealant 11oz

0.0

Description

Permatex 80011 Form a Gasket No. 2 Sealant 11oz (Slow Drying)


Permatex Form-A-Gasket No. 2 Sealant is a black, viscous
paste with a characteristic alcoholic odor. It is a slow drying,
flexible setting paste that changes to a pliable, non-hardening
film through solvent evaporation. It seals flanges, fittings,
connections and flexible assemblies against leakage. It
increases the reliability of gasket seals.
PRODUCT BENEFITS
  • Improves reliability
  • Extends gasket life
  • Stops leakage
  • Excellent for metal to metal assemblies
  • Slow drying
  • Flexible setting
TYPICAL APPLICATIONS
  • Valve cover gaskets
  • Oil pan gaskets
  • Threaded connections
  • Cover plates
  • Hose connections
DIRECTIONS FOR USE


  1. Remove all previous material from mating surfaces.
    Permatex Gasket Remover is recommended for most
    materials, not for plastics or painted surfaces.
  2. For best results, clean and dry all surfaces with a
    residue-free solvent, such as Permatex Brake and
    Parts Cleaner.
  3. Remove cap, puncture tube or cartridge seal and attach
    extension nozzle (if provided).
  4. When used as a gasket dressing, spread product with a
    spatula to a uniform film on one side of gasket and then
    position it on the assembly. Coat the second side of
    gasket and re-assemble. Slower drying formula
    increases work time.
  5. Assembly is operational after 4 hours, full cure is
    affected after 24 hours.

For Cleanup


  1. The product can be removed from metal surfaces with
    isopropyl alcohol. If the sealant has been dried for a
    long time or at high temperatures, cover the sealant with
    alcohol and allow to soften overnight.
  2. Clean hands with Permatex brand hand cleaners.

TYPICAL CURING PERFORMANCE

Permatex Form-A-Gasket No. 2 Sealant once applied,
develops a hard, semi-flexible sealant by solvent evaporation.
Dry times will vary with temperature, humidity and gap.
Chemical / Solvent Resistance

The product retains effective properties in contact with water,
ethylene glycol, gasoline, motor oil, transmission fluid and sea
water
GENERAL INFORMATION

This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
STORAGE

Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8 to 28C
(46 to 82F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range. To prevent
contamination of unused product, do not return any material to
its original container.
Read More Read Less
ProductsและAdhesive / Sealant

Categories

Permatex

Products Brand

You may also like