Oxidation Polymerized Outdoor Anti-corrosion-corrosion Tape NITOHULLMAC™ XG Series
“Stick-on Corrosion Protection Paint!” Oxidation Polymerized Heavy Duty Anti-Corrosion Tape
The NITOHULLMAC XG Series is made of a plastic base nonwoven fabric impregnated with a compound which has a specially compounded drying oil as its main ingredient. Through oxidation polymerization, this compound forms a surface film which delivers outstanding corrosion and weather resistance. Since this material is extremely pliable, it only needs to be applied and smoothed down to adhere tightly to any location, regardless of the shape.This simple application forms an outstanding anti-corrosion and corrosion protection layer. *We recommend that NITOHULLMAC XG Series products be used together. This includes the anti-corrosion tape, under-coat material, filler material, and top coat material.
Installation Video
See how NITOHULLMAC™ XG Series is installed.
Straight pipe |
Frange |
Elbow |
Around a tank base |
Features
Easy to apply, with remarkable workability
- Extremely pliable, so it fits any complex shape precisely.
- Application is accomplished simply by affixing, or wrapping, then smoothing it down.
- Changes in viscosity due to low and high temperatures are minimal, and workability does not vary between summer and winter.
Gives outstanding anti-corrosion
- The adhesive strength of this compound shuts out moisture and air from metallic surfaces.
Flame resistant
- Conforms to criteria by Fire and Disaster Management Agency in Japan.
General Characteristics
Item | Units | NITOHULLMAC™ XG | Test Method |
Thickness | µm | 1100 | AWWA C217-09 |
Weight | kg/m2 | 1.7 | - |
Tensile strength | N/m | 6823 | AWWA C217-09 / ASTM D10000 |
Elongation | % | 14 | AWWA C217-09 / ASTM D10000 |
Water absorption ratio | % | 0.5 | 24h water immersion |
Insulation resistance | Ω・m2 | 3.0×106 | JIS Z 1902 |
Volume resistivity | Ω・cm | 1.0×1011 | JIS K 6911 |
Adhesive strength | N/25mm | 24 | JIS Z 1902 |
Flame Resistance | - | Pass | Criteria by Fire and Disaster Management Agency in Japan |
Heat resistance | ℃ | 90 | 5 years' continuous use |
Salt water spray | 2,000h | No occurence of rust | JIS Z 1902 |
Weather Ability | 2,000h | No occurence of rust | Sunshine Weatherometer |
Drop melting point of saturant, (minimum) | ℃ | Over 100 | AWWA C217-09 / ASTM D127 |
- *The above values are sample observed values, not the guaranteed performance.
Salt Water Spray Test
1.Appearance after 2,000 hours of the salt water spray test.
2.After peeling off the tape
3.After removing compound
- Test Method
IOS Salt Water Spray
Tester Test Time:2,000h - Test Evaluation
Appearance after Test:
[Result]No occurrence of rust
Appearance after peeling off the tape:
[Result]No occurrence of rust
Lineup
Category | Function | Product No. | Specification | Standard Quality Used | Featured, Applications |
Main Material | Anti-corrosion Tapes | NITOHULLMAC™ XG | Thickness x Width x Length / Quantity 1.1㎜× 50mm×10m× 24Rolls/Case 1.1㎜×100mm×10m× 12Rolls/Case 1.1㎜×150mm×10m× 8Rolls/Case 1.1㎜×200mm×10m× 6Rolls/Case 1.1㎜×300mm×10m× 4Rolls/Case |
- |
|
Supplementary Materials | Undercoat Materials | NITOHULLMAC™ XG-PN | Weight×Quantity 16kg×1Can/Case |
300g/m2 |
|
NITOPRIMER AF | Weight×Quantity 14kg×10Can/Case |
200g/m2 |
|
||
Filler Materials | NITOHULLMAC™ XG-M | Weight x Quantity 2kg x 10Pc / Case Thickness x Width x Length 25mm x 250mm x 200mm / 1Pc |
- |
|
|
Top Coat Materials | NITOHULLMAC™ XG-T | Weight x Quantity 4kg x 4Bags / Can / Case |
300g /m2 |
|
Applications
- Primarily used as a long-term anti-corrosion (heavy corrosion protection) measure for outdoor steel structures.
Bridge Piping | |
Abutment Base | |
Around a Tank Base (to prevent rain water penetration) | |
Outdoor Piping | |
Aqueduct | |
Under-bridge Piping |