Loctite SI 5926 Silicone Adhesive Blue
Loctite SI 5926 Silicone Adhesive Blue 40ml
- Viscosity : Flow similar to SAE 10 Motor Oil
- Key Substrates : Metal, Plastic
- Color : Blue
- Curing Type : Room temperature vulcanizing (RTV)
- Application : Gasketing
LOCTITE SI 5926 is a multi-purpose flexible silicone sealant and cures on exposure to moisture in the air to form a tough rubber gasket. This product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Typical applications include valve covers, timing gear covers, differential covers, oil pans, transmission pans, water pumps, and thermostat housings. This product is typically used in applications with an operating temperature range of -54 °C to 204 °C.
- Multi-purpose flexible silicone sealant. Can be used on metal, plastic and painted parts
- Resists vibration, thermal expansion and contraction
- Operating temperature range of -54 °C to +150 °C
to form a tough, flexible, silicone rubber gasket. This product
resists aging, weathering and thermal cycling without
hardening, shrinking or cracking. Typical applications include
use in valve covers, timing gear covers, differential covers, oil
pans, transmission pans, water pumps and
thermostat housings. This product is typically used in
applications with an operating range of -54 °C to 204 °C
TYPICAL ENVIRONMENTAL RESISTANCE
The product retains effective properties in contact with
automotive fluids, such as motor oil, transmission fluids,
alcohol and antifreeze solutions.
NOTE: Not recommended for parts in contact with gasoline
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Safety Data Sheet (SDS).
NOTE: The curing process can cause corrosion to some
Directions for use:
- For best performance bond surfaces should be clean and
free from grease.
- Moisture curing begins immediately after the product is
exposed to the atmosphere, therefore parts to be
assembled should be mated within a few minutes after the
product is dispensed.
- The bond should be allowed to cure (e.g. seven days),
before subjecting to heavy service loads.
- Excess material can be easily wiped away with non-polar
NOTE: LOCTITE® SI 5926™ is not recommended for
use as a cylinder head gasket or head gasket sealant
Not for product specifications
The technical data contained herein are intended as reference
only. Please contact your local quality department for
assistance and recommendations on specifications for this
Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
Corporation cannot assume responsibility for product which
has been contaminated or stored under conditions other than
those previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representative.
This product has no reviews yet.