Loctite SI 5145 RTV Silicone Transparent Sealant



Loctite SI 5145 Rtv Silicone Transparent Sealant 85g

  • Strength : High
  • Color : Clear
  • Curing Type : Room temperature vulcanizing (RTV)
  • Application : Bonding, Sealing or Coating

LOCTITE SI 5145 is a 1-part, clear, neutral-curing industrial alkoxy silicone sealant/adhesive formulated specifically for bonding, sealing and coating electronic devices. The non-slumping nature of the product makes it ideal for reinforcing and strain relieving delicate components. It resists weathering, moisture, ozone and retains its properties through severe environments.

  • Designed for electronic devices
  • Non-slumping
  • Resists weathering
LOCTITE® SI 5145™ is specifically formulated for bonding,
sealing, and coating of electronic devices, especially for
military, automotive and industrial electronic. The non-slumping
nature of this product makes it ideal for reinforcing and strain
relieving delicate components. LOCTITE® SI 5145™ resists
weathering, moisture, ozone and retains its properities through
severe environments. This product is typically used in
applications up to 200 °C.

LOCTITE® SI 5145™ is tested to the lot requirements of
Military Specification Mil-A-46146B. Note: This is a regional
approval. Please contact your local Technical Service Center
for more information and clarification.

For safe handling information on this product, consult the
Safety Data Sheet (SDS).
Directions for use:

  1. For best performance bond surfaces should be clean and
    free from grease.
  2. Full performance properties will develop over 72 hours.
  3. Moisture curing begins immediately after the product is
    exposed to the atmosphere, therefore parts to be
    assembled should be mated within a few minutes after the
    product is dispensed.
  4. Excess material can be easily wiped away with non-polar

Loctite Material Specification

LMS dated September-1, 1995. Test reports for each batch
are available for the indicated properties. LMS test reports
include selected QC test parameters considered appropriate to
specifications for customer use. Additionally, comprehensive
controls are in place to assure product quality and
consistency. Special customer specification requirements may
be coordinated through Henkel Quality.

Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
Corporation cannot assume responsibility for product which
has been contaminated or stored under conditions other than
those previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representative.
Read More Read Less
ProductsและAdhesive / Sealant



Products Brand

You may also like