Loctite 566 Hydraulic Thread Sealant

Loctite 566 Hydraulic Thread Sealant 50ml

• Strength : Low
• Temperature : -65 - 300 °F
• Viscosity : Medium
• Color : Brown
• Curing Type : Anaerobic
• Application : Thread sealing

 

LOCTITE 566 is a brown, dimethacrylate ester acrylic liquid threadlocker designed for the locking and sealing of metal pipes and fittings. It is used to seal against water, oil and most common organic materials.

• Medium viscosity
• Low strength

Directions for use:

For Assembly

1. For best results, clean all surfaces (external and internal)
   with a LOCTITE®
   cleaning solvent and allow to dry.
2. If the material is an inactive metal or the cure speed is
   too slow, spray all threads with Activator 7471™ or
   7649™ and allow to dry.
3. Apply to the screw in enough amount to fill out all of the
   threads. This product has better performance with small
   gaps (0.05 mm). Big threads can generate great gaps,
   that affect cure speed and resistance.
4. Using compliant practices, assemble and wrench tighten
   fittings in accordance with manufacturers
   recommendations.

Loctite Material Specification

LMS dated January-28, 2005. Test reports for each batch are
available for the indicated properties. LMS test reports include
selected QC test parameters considered appropriate to
specifications for customer use. Additionally, comprehensive
controls are in place to assure product quality and
consistency. Special customer specification requirements may
be coordinated through Henkel Quality.

Storage

Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.