{"title":"Gasketing","description":"\u003cp\u003e\u003cspan\u003eGaskets are used to prevent leakage of fluids or gases by forming impervious barriers. For successful gasketing, it is necessary that the seal must remain intact and leak-free over a long period of time. \u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"permatex-80038-non-drying-prussian-blue-22ml","title":"Permatex 80038 Non Drying Prussian Blue 22ml","description":"\u003cp\u003ePermatex Prussian Blue is a non-drying blue, oily paste type pigment designed to identify points of interference and high spots on precision parts to be fitted. It speeds tracing and precision fittings of close tolerance assemblies. Makes improper fitting high spots immediately visible as bright blue streaks.\u003c\/p\u003e\n\u003ch5\u003ePRODUCT BENEFITS\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSimple to apply\u003c\/li\u003e\n\u003cli\u003eImproper fitting spots immediately visible\u003c\/li\u003e\n\u003cli\u003eNon drying\u003c\/li\u003e\n\u003cli\u003eEasy clean-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eTYPICAL APPLICATIONS\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBearings\u003c\/li\u003e\n\u003cli\u003eValves\u003c\/li\u003e\n\u003cli\u003eGears\u003c\/li\u003e\n\u003cli\u003eOther close tolerance or machined assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDIRECTIONS FOR USE\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCoat parts with a uniform film of Prussian Blue.\u003c\/li\u003e\n\u003cli\u003eAssemble in working position, turn shaft.\u003c\/li\u003e\n\u003cli\u003eImproper fitting will show up as a definite, easy-to-see,\u003c\/li\u003e\n\u003cli\u003ebright blue streak.\u003c\/li\u003e\n\u003cli\u003eCorrect the seating of the assembly.\u003c\/li\u003e\n\u003cli\u003eWipe clean.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eGENERAL INFORMATION\u003c\/h5\u003e\n\u003cp\u003eThis product is not recommended for use in pure oxygen and\/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).\u003c\/p\u003e\n\u003ch5\u003eSTORAGE\u003c\/h5\u003e\n\u003cp\u003eProducts shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8_ to 28_C (46_ to 82_F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range. To prevent contamination of unused product, do not return any material to its original container.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45347272589601,"sku":"","price":9.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/files\/Permatex80038Non.jpg?v=1686134153"},{"product_id":"loctite-515-gasket-eliminator-flange-sealant-50ml-henkel-authorized-distributor","title":"Loctite 515 Gasket Eliminator Flange Sealant 50ml","description":"\u003cp data-path-to-node=\"4\"\u003eEnsure a leak-proof, high-performance seal with \u003cb data-index-in-node=\"48\" data-path-to-node=\"4\"\u003eLOCTITE 515 Gasket Eliminator\u003c\/b\u003e. This professional-grade, anaerobic flange sealant is specifically engineered for machined, rigid metal components. By curing in the absence of air between close-fitting surfaces, it forms a tough, flexible form-in-place gasket that reliably flexes with minor flange movements. Whether you are sealing pumps, thermostats, compressors, transmission housings, or axle covers, \u003cb data-index-in-node=\"452\" data-path-to-node=\"4\"\u003eLOCTITE 515\u003c\/b\u003e delivers immediate resistance to low pressures right after assembly.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"5\"\u003eKey Features \u0026amp; Benefits:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"6,0,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"6,0,0\"\u003ePerfect Form-In-Place Seal:\u003c\/b\u003e Replaces pre-cut paper and rubber gaskets on rigid machined metal flanges, reducing inventory costs.\u003c\/li\u003e\n\u003cli data-path-to-node=\"6,1,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"6,1,0\"\u003eFills Gaps up to 0.25 mm:\u003c\/b\u003e Designed to effectively fill gaps up to 0.25 mm (\u003cspan data-index-in-node=\"75\" data-math='0.01\"' class=\"math-inline\"\u003e$0.01\"$\u003c\/span\u003e) for a precise fit.\u003c\/li\u003e\n\u003cli data-path-to-node=\"6,2,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"6,2,0\"\u003eUV Florescent for Quality Control:\u003c\/b\u003e The purple formula fluoresces under UV light, allowing for quick and easy visual inspection of the bead.\u003c\/li\u003e\n\u003cli data-path-to-node=\"6,3,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"6,3,0\"\u003eMedium Strength \u0026amp; Reliable Cure:\u003c\/b\u003e Offers a dependable tensile shear strength (6 N\/mm2) with a typical 30-minute fixture time at 30°C.\u003c\/li\u003e\n\u003cli data-path-to-node=\"6,4,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"6,4,0\"\u003eExcellent Fluid Resistance:\u003c\/b\u003e Built for demanding industrial environments, providing robust resistance against common automotive and industrial fluids.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45501839081761,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/files\/loctiteis1-515Wx515H.jpg?v=1779249431"},{"product_id":"high-temperature-silicone-loctite-596","title":"LOCTITE® SI 596 High-Temperature Red Silicone Sealant","description":"\u003cp data-path-to-node=\"3\"\u003e\u003cb data-index-in-node=\"82\" data-path-to-node=\"3\"\u003eLOCTITE® SI 596 High-Temperature Red Silicone Sealant\u003c\/b\u003e is a premium, 1-part RTV (room temperature vulcanizing) acetoxy silicone paste designed for heavy-duty bonding and gasketing. It cures upon exposure to moisture in the air, forming a tough, flexible, and waterproof rubber seal that delivers exceptional oil and fluid resistance. Whether you are sealing industrial furnaces or maintaining automotive components, this flowable red silicone adhesive ensures long-lasting durability under the most demanding conditions.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"4\"\u003eHigh-Temperature Resistance \u0026amp; Superior Performance\u003c\/h3\u003e\n\u003cp data-path-to-node=\"5\"\u003eEngineered for extreme environments, LOCTITE SI 596 offers continuous heat resistance and can withstand peak operating temperatures up to \u003cb data-index-in-node=\"138\" data-path-to-node=\"5\"\u003e316°C (600°F)\u003c\/b\u003e. Unlike standard sealants, its advanced formula is highly resistant to aging, weathering, and severe thermal cycling. It maintains its structural integrity without hardening, shrinking, or cracking, providing a reliable leak-proof barrier you can trust.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"6\"\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"7,0,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"7,0,0\"\u003eExtreme Heat Resistance:\u003c\/b\u003e Suitable for high-temperature applications up to 316°C (600°F).\u003c\/li\u003e\n\u003cli data-path-to-node=\"7,1,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"7,1,0\"\u003eRobust \u0026amp; Flexible Bond:\u003c\/b\u003e Cures to a tough, waterproof, and oil-resistant silicone rubber seal.\u003c\/li\u003e\n\u003cli data-path-to-node=\"7,2,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"7,2,0\"\u003eFlowable Smooth Paste:\u003c\/b\u003e Easy to apply smoothly across complex joints and flanges.\u003c\/li\u003e\n\u003cli data-path-to-node=\"7,3,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"7,3,0\"\u003eWeather \u0026amp; Age Resistant:\u003c\/b\u003e Resists thermal cycling and weathering without cracking or shrinking.\u003c\/li\u003e\n\u003cli data-path-to-node=\"7,4,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"7,4,0\"\u003eMulti-Surface Compatibility:\u003c\/b\u003e Forms a strong, flexible bond to most industrial surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"8\"\u003eVersatile Industrial \u0026amp; Automotive Applications\u003c\/h3\u003e\n\u003cp data-path-to-node=\"9\"\u003eThanks to its professional-grade formulation, this high-temperature silicone is the go-to choice for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"10,0,0\"\u003eIndustrial furnaces, ovens, boilers, and exhaust stacks\u003c\/li\u003e\n\u003cli data-path-to-node=\"10,1,0\"\u003eHigh-temperature ducting and ventilation lines\u003c\/li\u003e\n\u003cli data-path-to-node=\"10,2,0\"\u003eHeating elements in commercial and household electrical appliances\u003c\/li\u003e\n\u003cli data-path-to-node=\"10,3,0\"\u003eAutomotive gasketing and engine component sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"12\"\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp data-path-to-node=\"13\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"13\"\u003eWhat is the maximum temperature LOCTITE SI 596 can withstand?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"13\"\u003eLOCTITE SI 596 is specifically formulated for high-temperature environments, resisting temperatures up to \u003cb data-index-in-node=\"168\" data-path-to-node=\"13\"\u003e316°C (600°F)\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp data-path-to-node=\"14\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"14\"\u003eHow does LOCTITE SI 596 cure?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"14\"\u003eIt is a 1-part RTV silicone sealant, meaning it cures at room temperature simply by interacting with the moisture present in the air.\u003c\/p\u003e\n\u003cp data-path-to-node=\"15\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"15\"\u003eIs this silicone sealant resistant to oil and automotive fluids?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"15\"\u003eYes. Once fully cured, it forms a tough, flexible rubber bond that is highly resistant to oil, water, and weathering, making it excellent for both industrial and automotive gasketing.\u003c\/p\u003e\n\u003cp data-path-to-node=\"16\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"16\"\u003eWill it shrink or crack over time?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"16\"\u003eNo. LOCTITE SI 596 is engineered to withstand severe thermal cycling, aging, and harsh weather conditions without hardening, shrinking, or cracking.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"300ml","offer_id":50620031467809,"sku":"","price":30.6,"currency_code":"SGD","in_stock":true},{"title":"80ml","offer_id":50620031500577,"sku":"","price":14.2,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/files\/LOCTITE_SI_596_Red_59675_198817_adhesive_300ml_NA.webp?v=1732590362"},{"product_id":"loctite-510-gasket-eliminator-flange-sealant","title":"Loctite 510 Gasket Eliminator Flange Sealant","description":"\u003cp\u003e\u003cstrong\u003eLoctite 510 Gasket Eliminator Flange Sealant (50ml)\u003c\/strong\u003e is a medium-strength, pink anaerobic flange sealant engineered for maximum efficacy in gasketing and sealing. This industrial-grade adhesive permanently seals rigid joints, preventing costly fluid leaks and pressure loss caused by vibration, thermal expansion, or mechanical stress. Whether you are securing transmission housings or motor casings, this premium flange sealant provides a robust, leak-proof seal on all metals—including aluminum and steel flanges.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Choose Loctite 510 Gasket Eliminator?\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh Temperature Resistance\u003c\/strong\u003e: \u003cem\u003eMaintains an exceptional, reliable seal in extreme operational heat up to 400°F (204°C).\u003c\/em\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstant Low-Pressure Seal\u003c\/strong\u003e: \u003cem\u003eProvides immediate sealing capabilities against low pressures right after assembly, reducing line testing downtime.\u003c\/em\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface Flaw Adaptation\u003c\/strong\u003e: \u003cem\u003ePerfectly fills and adapts to flange surface irregularities, scratches, and nicks up to 0.25 mm.\u003c\/em\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncreased Torque Capacity\u003c\/strong\u003e: \u003cem\u003eEnhances the structural rigidity and structural torque capacity of assembled flange joints once fully cured.\u003c\/em\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertified Food-Safe Grade\u003c\/strong\u003e: \u003cem\u003eCarries the P1 NSF Registration (No. 123007) for safe use in and around food processing areas where there is no direct food contact.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type\u003c\/strong\u003e: Anaerobic Flange Sealant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStrength\u003c\/strong\u003e: Medium (5 N\/mm² Tensile Shear Strength)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Pink\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContainer Size\u003c\/strong\u003e: 50ml\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: P1 NSF Registered (Reg. No. 123007)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSimple Application Instructions\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClean\u003c\/strong\u003e: For optimal results, clean all internal and external flange surfaces with a suitable Loctite cleaning solvent to remove dirt, grease, or old gasket residue, and let dry.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApply\u003c\/strong\u003e: Apply a continuous bead of the liquid anaerobic sealant to the flange mating surface area.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAssemble\u003c\/strong\u003e: Assemble and tighten the parts as required. The formula will begin curing once it is confined between closely fitting metal surfaces in the absence of air.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\n\u003ch4\u003eWhat is Loctite 510 used for?\u003c\/h4\u003e\n\u003cp\u003eLoctite 510 is a medium-strength anaerobic sealant designed for gasketing and sealing. It is specifically formulated to prevent rigid flange faces on transmissions, motor casings, and pumps from leaking or loosening due to extreme temperatures and high-pressure stress factors.\u003c\/p\u003e\n\n\u003ch4\u003eCan Loctite 510 be disassembled?\u003c\/h4\u003e\n\u003cp\u003eYes. While it forms a tough, rigid seal, it is classified as a medium-strength adhesive. Components can typically be separated using standard hand tools and separated by leveraging a prying force against the joint.\u003c\/p\u003e\n\n\u003ch4\u003eDoes Loctite 510 work on all materials?\u003c\/h4\u003e\n\u003cp\u003eNo. Loctite 510 is an anaerobic compound that relies on metal ions to cure. It offers robust performance across metal substrates, and is highly effective on both rigid aluminum surfaces as well as steel surfaces.\u003c\/p\u003e\n\n\u003ch4\u003eIs Loctite 510 safe for food processing environments?\u003c\/h4\u003e\n\u003cp\u003eLoctite 510 is certified and registered to P1 NSF standards. This means it is approved for use in food processing facilities as a nonfood compound, provided it is used in a manner where there is no direct contact with food or potable water.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552913056033,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/loctite-510.jpg?v=1687489991"},{"product_id":"loctite-515-gasket-eliminator-flange-sealant","title":"Loctite 515 Flange Sealant 50ml","description":"\u003cp\u003e\u003cstrong\u003eLoctite 515 Flange Sealant (50ml)\u003c\/strong\u003e is a medium-strength, purple anaerobic gasketing compound engineered for maximum efficacy in sealing rigid flange joints. This industrial-grade adhesive permanently eliminates leaks, preventing costly fluid loss and machinery downtime caused by vibration, thermal movement, or minor flange flexing. Whether you are securing pumps or transmission housings, this premium flange sealant provides a robust, leak-proof seal on all metals—including aluminum and steel components.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose Loctite 515 Perfect Seal?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm-In-Place Performance\u003c\/strong\u003e: \u003cem\u003eCures flexibly between closely fitting metal surfaces to form an exact, perfect seal that eliminates the need for pre-cut paper or rubber gaskets.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal Substrate Specialization\u003c\/strong\u003e: \u003cem\u003eOptimized specifically for rigid, machined metal components like steel and aluminum flanges.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent Gap Filling\u003c\/strong\u003e: \u003cem\u003eFills gaps effortlessly up to 0.25 mm, correcting surface irregularities or minor scratches across mating faces.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Fluid Resistance\u003c\/strong\u003e: \u003cem\u003eProvides an impervious barrier against standard industrial fluids, oils, lubricants, and transmission fluids.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Thermal Range\u003c\/strong\u003e: \u003cem\u003eMaintains its mechanical integrity and sealing properties across an operational temperature range of -65°F to 300°F (-54°C to 150°C).\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type\u003c\/strong\u003e: Methacrylate-based Anaerobic Flange Sealant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrength\u003c\/strong\u003e: Medium (6 N\/mm² Tensile Shear Strength)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Purple\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size\u003c\/strong\u003e: 50ml\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 150,000 - 375,000 mPa.s (High Viscosity)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSimple Application Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean\u003c\/strong\u003e: For optimal results, clean all internal and external flange surfaces with a suitable Loctite cleaning solvent to remove residual oil, old gasket material, and debris, then let dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply\u003c\/strong\u003e: Apply a continuous bead of the liquid purple flange sealant to one flange surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssemble\u003c\/strong\u003e: Assemble and bolt the components tightly as required. The formula will begin curing once it is confined between metal surfaces in the absence of air.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003ch4\u003eWhat is Loctite 515 used for?\u003c\/h4\u003e\n\u003cp\u003eLoctite 515 is a medium-strength anaerobic gasketing product designed for machined, rigid metal flanges. It is specifically formulated to prevent assemblies like pumps, thermostats, compressors, transmission housings, and axle covers from leaking due to high-pressure fluids and vibration.\u003c\/p\u003e\n\u003ch4\u003eCan Loctite 515 be disassembled?\u003c\/h4\u003e\n\u003cp\u003eYes. Although it forms a tough, reliable seal, it remains flexible enough that components can be separated using standard hand tools. Any remaining residue can be removed with a gasket scraper or solvent.\u003c\/p\u003e\n\u003ch4\u003eDoes Loctite 515 work on plastics?\u003c\/h4\u003e\n\u003cp\u003eNo. Loctite 515 is an anaerobic adhesive, which means it requires both the absence of air and the presence of active metal ions to cure properly. It is highly effective on metal surfaces, particularly aluminum and steel, but will not cure on plastic substrates.\u003c\/p\u003e\n\u003ch4\u003eHow should Loctite 515 be stored?\u003c\/h4\u003e\n\u003cp\u003eTo ensure a maximum shelf life, store the product in its original unopened container in a dry location. The optimal storage temperature range is between 8°C and 21°C. Storing the sealant below 8°C or above 28°C can adversely affect its properties.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552913154337,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/files\/LECTITE-515-22645_1881269_231695.webp?v=1781677592"},{"product_id":"loctite-518-gasket-flange-sealant","title":"Loctite 518 Flange Sealant 50ml","description":"\u003cp\u003e\u003cstrong\u003eLoctite 518 Flange Sealant 50ml\u003c\/strong\u003e is a medium-strength, anaerobic red gasketing material engineered for maximum efficacy in sealing close-fitting joints between rigid metal faces and flanges. This industrial-grade adhesive permanently fills gaps up to 0.25mm, preventing costly fluid leaks or pressure loss caused by vibration, thermal expansion, or minor surface irregularities. Whether you are securing transmissions or motor housings, this premium flange sealant provides a robust, leak-proof seal on all rigid metals—including both active and inactive substrates like aluminum, iron, and steel.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose Loctite 518 Gasket Flange Sealant?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstant Seal\u003c\/strong\u003e: \u003cem\u003eSeals instantly against low pressure immediately after assembly.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnmatched Versatility\u003c\/strong\u003e: \u003cem\u003eAdapts to flange surface irregularities and cures right through minor surface contamination.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical \u0026amp; High-Pressure Resistance\u003c\/strong\u003e: \u003cem\u003eForms a flexible, chemical-resistant seal that will not tear, decay, or suffer from compression set.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCost Efficiency\u003c\/strong\u003e: \u003cem\u003eReduces process and inventory costs by eliminating the need for manual assembly or large stocks of conventional cut gaskets.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable Service\u003c\/strong\u003e: \u003cem\u003eMaintains a durable seal in heavy-duty environments while still allowing parts to disassemble easily, even after extended use.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type\u003c\/strong\u003e: Anaerobic Flange Gasket \/ Gasketing Material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrength\u003c\/strong\u003e: Medium Strength (Semi-flexible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size\u003c\/strong\u003e: 50ml\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: NSF P1 Reg. No. 123758\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile Shear Strength\u003c\/strong\u003e: 7.5 N\/mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 500,000 - 1,000,000 mPa.s (cP) Brookfield\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSimple Application Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean\u003c\/strong\u003e: For optimal results, clean all internal and external mating surfaces to remove oil and debris, then let dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply\u003c\/strong\u003e: Apply a continuous bead of the gel-type sealant to one of the flange surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssemble\u003c\/strong\u003e: Assemble and tighten the mating flanges as required. The formula will begin curing once it is confined in the absence of air between the close-fitting metal surfaces.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003ch4\u003eWhat is Loctite 518 used for?\u003c\/h4\u003e\n\u003cp\u003eLoctite 518 is a medium-strength anaerobic gasketing material designed for sealing rigid iron, aluminum, and steel flanged mating surfaces. It is specifically formulated to prevent fluid leakage and pressure drops due to surface irregularities, vibration, or environmental breakdown.\u003c\/p\u003e\n\u003ch4\u003eCan Loctite 518 be disassembled?\u003c\/h4\u003e\n\u003cp\u003eYes. Despite its durable, chemical-resistant bond, Loctite 518 is designed so that mating parts disassemble easily with standard hand tools, even after extended periods of heavy-duty industrial service.\u003c\/p\u003e\n\u003ch4\u003eDoes Loctite 518 work on aluminum?\u003c\/h4\u003e\n\u003cp\u003eYes. Loctite 518 offers robust performance across a wide range of rigid metals. It is highly effective on active surfaces (like iron and steel) as well as inactive surfaces (such as aluminum).\u003c\/p\u003e\n\u003ch4\u003eIs Loctite 518 safe for specific industrial food or water environments?\u003c\/h4\u003e\n\u003cp\u003eLoctite 518 is registered to NSF P1 (Reg. No. 123758), making it acceptable for use as a sealant in and around food processing areas where there is no possibility of direct food contact.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552913318177,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/files\/LECTITE-518-22646_1881270_231697-1.webp?v=1781678350"},{"product_id":"loctite-573-gasket-sealant","title":"Loctite 573 Gasket Sealant 250ml","description":"\u003cp\u003e\u003cstrong\u003eLoctite 573 Flange Sealant 250ml\u003c\/strong\u003e is a medium viscosity, green anaerobic flange sealant engineered for maximum efficacy in gasketing and sealing. This industrial-grade adhesive permanently seals close-fitting joints between rigid metal faces and flanges, preventing costly fluid leaks caused by structural movement or vibration. Whether you are securing transmission casings or motor housings, this premium form-in-place gasket provides a robust, leak-proof seal on all rigid metal joints—including aluminum and steel substrates.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Choose Loctite 573 Extended Assembly Time?\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIdeal for Long Assemblies\u003c\/strong\u003e: \u003cem\u003eSlow-curing properties make it the perfect product for part assembly jobs extending over several hours.\u003c\/em\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eReduced Liquid Migration\u003c\/strong\u003e: \u003cem\u003eThe thixotropic nature of the formula minimizes the running or movement of the product after it is applied to the part.\u003c\/em\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExcellent Gap Filling\u003c\/strong\u003e: \u003cem\u003eSpecifically designed to accommodate and seal close-fitting flanged parts with gaps up to 0.25 mm.\u003c\/em\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eForm-in-Place Reliability\u003c\/strong\u003e: \u003cem\u003eReplaces traditional pre-cut gaskets on rigid flanged connections to ensure continuous surface-to-surface contact.\u003c\/em\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eImmediate Low-Pressure Testing\u003c\/strong\u003e: \u003cem\u003eLow pressures (\u0026lt;0.5 MPa) may be used immediately after assembly to confirm a complete seal before full cure.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProduct Type\u003c\/strong\u003e: Anaerobic Gasket \u0026amp; Flange Sealant\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eStrength\u003c\/strong\u003e: Medium (Tensile Shear Strength: 1.3 N\/mm²)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Green\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eContainer Size\u003c\/strong\u003e: 250ml\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: Engineered to standard industrial gasketing specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSimple Application Instructions\u003c\/h3\u003e\n\u003col\u003e\n    \u003cli\u003e\n\u003cstrong\u003eClean\u003c\/strong\u003e: For optimal results, clean all internal and external surfaces with a Loctite cleaning solvent and let dry to ensure they are free from grease and oils.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eApply\u003c\/strong\u003e: Apply manually as a continuous bead or by screen printing to one surface of the flanges.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAssemble\u003c\/strong\u003e: Assemble and tighten flanges as soon as possible after application to avoid shimming. The formula will begin curing once confined in the absence of air between the close-fitting metal surfaces.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\n\u003ch4\u003eWhat is Loctite 573 used for?\u003c\/h4\u003e\n\u003cp\u003eLoctite 573 is a medium strength anaerobic flange sealant designed for gasketing and sealing rigid connections. It is specifically formulated to prevent industrial casings and flanged joints from leaking fluid due to mating tolerance gaps or joint movement.\u003c\/p\u003e\n\n\u003ch4\u003eCan Loctite 573 be disassembled?\u003c\/h4\u003e\n\u003cp\u003eYes. With a standard tensile shear strength of 1.3 N\/mm², components sealed with Loctite 573 can be separated and disassembled using normal industrial hand tools and scraping methods during maintenance.\u003c\/p\u003e\n\n\u003ch4\u003eDoes Loctite 573 work on aluminum?\u003c\/h4\u003e\n\u003cp\u003eYes. Loctite 573 offers robust performance across major rigid metal structures. It is highly effective on both aluminum components as well as steel surfaces.\u003c\/p\u003e\n\n\u003ch4\u003eIs Loctite 573 safe for standard workshop storage?\u003c\/h4\u003e\n\u003cp\u003eLoctite 573 is stable and safe when stored properly. This means it maintains its properties best when kept in its unopened container in a dry location at an optimal temperature range between 8°C and 21°C.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552914956577,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/files\/loctite_573_374082_tottle_250ml_front.webp?v=1781836668"},{"product_id":"loctite-574-gasket-flange-sealant","title":"Loctite 574 Flange Sealant 50ml","description":"\u003cp\u003e\u003cstrong\u003eLoctite 574 Flange Sealant \u003c\/strong\u003eis a medium strength, orange anaerobic flange sealant engineered for maximum efficacy in gasketing and sealing rigid metal faces. This industrial-grade adhesive permanently seals close-fitting joints, preventing costly fluid and gas leaks caused by shock, high vibration, or minor joint movement. Whether you are securing cast iron components or pump housings, this premium form-in-place gasket provides a robust, leak-proof seal on all rigid metal joints—including aluminum and steel substrates.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose Loctite 574?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstant Low-Pressure Seal\u003c\/strong\u003e: \u003cem\u003eProvides an immediate resistance to low pressures (\u0026lt;0.5 MPa) right after assembly before the product begins full cure.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced Liquid Migration\u003c\/strong\u003e: \u003cem\u003eThe thixotropic nature of the formula minimizes the running or dripping of the liquid product after application to the substrate.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Solvent \u0026amp; Fluid Tolerance\u003c\/strong\u003e: \u003cem\u003eOffers excellent resistance against water, industrial oils, gasoline, and glycol mixtures.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal for Rigid Metal Connections\u003c\/strong\u003e: \u003cem\u003ePerfectly suited for precise sealing on close-fitting flanged parts with gaps up to 0.25 mm.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable Maintenance Disassembly\u003c\/strong\u003e: \u003cem\u003eFeatures a medium strength profile (tensile shear strength of 8.5 N\/mm²) allowing components to be separated safely using standard hand tools.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type\u003c\/strong\u003e: Anaerobic Methacrylate Gasket Sealant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrength\u003c\/strong\u003e: Medium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Orange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size\u003c\/strong\u003e: 50ml\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: Engineered to standard industrial manufacturing specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSimple Application Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean\u003c\/strong\u003e: For optimal results, clean all internal and external surfaces with a Loctite cleaning solvent and let dry to ensure they are free from grease and oils.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply\u003c\/strong\u003e: Apply manually as a continuous bead or by screen printing to one surface of the flanges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssemble\u003c\/strong\u003e: Assemble and tighten the flanges as soon as possible after application to avoid shimming. The formula will begin curing once confined in the absence of air between the close-fitting metal surfaces.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003ch4\u003eWhat is Loctite 574 used for?\u003c\/h4\u003e\n\u003cp\u003eLoctite 574 is a medium strength anaerobic flange sealant designed for creating form-in-place gaskets between rigid metal faces. It is specifically formulated to prevent machine casings and housings from leaking due to high-vibration stresses or joint relaxation.\u003c\/p\u003e\n\u003ch4\u003eCan Loctite 574 be disassembled?\u003c\/h4\u003e\n\u003cp\u003eYes. Although it provides an exceptionally tough and durable seal, Loctite 574 is engineered for parts that require occasional servicing and can be disassembled cleanly using standard industrial hand tools.\u003c\/p\u003e\n\u003ch4\u003eDoes Loctite 574 work on aluminum?\u003c\/h4\u003e\n\u003cp\u003eYes. Loctite 574 offers robust performance across a variety of machined metal hardware. It is highly effective on active metal connections as well as passive metal substrates including aluminum and steel.\u003c\/p\u003e\n\u003ch4\u003eIs Loctite 574 safe for harsh temperature environments?\u003c\/h4\u003e\n\u003cp\u003eLoctite 574 is engineered to withstand demanding operating environments. It maintains its seal integrity across a wide temperature range from -55°C up to +150°C, making it safe for standard automotive and industrial applications.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552917905697,"sku":"","price":52.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/files\/Loctite_574_flange_sealant_50ml_Bottle_234534_Front.webp?v=1781837407"},{"product_id":"loctite-574-gasket-flange-sealant-1","title":"Loctite 574 Flange Sealant 250ml","description":"\u003cp\u003e\u003cstrong\u003eLoctite 574 Gasket Flange Sealant \u003c\/strong\u003eis a medium strength, orange anaerobic flange sealant engineered for maximum efficacy in gasketing and sealing rigid metal faces. This industrial-grade adhesive permanently seals close-fitting joints, preventing costly fluid and gas leaks caused by shock, high vibration, or minor joint movement. Whether you are securing cast iron components or pump housings, this premium form-in-place gasket provides a robust, leak-proof seal on all rigid metal joints—including aluminum and steel substrates.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose Loctite 574 Flange Sealant?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstant Low-Pressure Seal\u003c\/strong\u003e: \u003cem\u003eProvides an immediate resistance to low pressures (\u0026lt;0.5 MPa) right after assembly before the product begins full cure.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced Liquid Migration\u003c\/strong\u003e: \u003cem\u003eThe thixotropic nature of the formula minimizes the running or dripping of the liquid product after application to the substrate.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Solvent \u0026amp; Fluid Tolerance\u003c\/strong\u003e: \u003cem\u003eOffers excellent resistance against water, industrial oils, gasoline, and glycol mixtures.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal for Rigid Metal Connections\u003c\/strong\u003e: \u003cem\u003ePerfectly suited for precise sealing on close-fitting flanged parts with gaps up to 0.25 mm.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable Maintenance Disassembly\u003c\/strong\u003e: \u003cem\u003eFeatures a medium strength profile (tensile shear strength of 8.5 N\/mm²) allowing components to be separated safely using standard hand tools.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type\u003c\/strong\u003e: Anaerobic Methacrylate Gasket Sealant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrength\u003c\/strong\u003e: Medium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Orange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size\u003c\/strong\u003e: 250ml\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: Engineered to standard industrial manufacturing specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSimple Application Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean\u003c\/strong\u003e: For optimal results, clean all internal and external surfaces with a Loctite cleaning solvent and let dry to ensure they are free from grease and oils.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply\u003c\/strong\u003e: Apply manually as a continuous bead or by screen printing to one surface of the flanges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssemble\u003c\/strong\u003e: Assemble and tighten the flanges as soon as possible after application to avoid shimming. The formula will begin curing once confined in the absence of air between the close-fitting metal surfaces.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003ch4\u003eWhat is Loctite 574 used for?\u003c\/h4\u003e\n\u003cp\u003eLoctite 574 is a medium strength anaerobic flange sealant designed for creating form-in-place gaskets between rigid metal faces. It is specifically formulated to prevent machine casings and housings from leaking due to high-vibration stresses or joint relaxation.\u003c\/p\u003e\n\u003ch4\u003eCan Loctite 574 be disassembled?\u003c\/h4\u003e\n\u003cp\u003eYes. Although it provides an exceptionally tough and durable seal, Loctite 574 is engineered for parts that require occasional servicing and can be disassembled cleanly using standard industrial hand tools.\u003c\/p\u003e\n\u003ch4\u003eDoes Loctite 574 work on aluminum?\u003c\/h4\u003e\n\u003cp\u003eYes. Loctite 574 offers robust performance across a variety of machined metal hardware. It is highly effective on active metal connections as well as passive metal substrates including aluminum and steel.\u003c\/p\u003e\n\u003ch4\u003eIs Loctite 574 safe for harsh temperature environments?\u003c\/h4\u003e\n\u003cp\u003eLoctite 574 is engineered to withstand demanding operating environments. It maintains its seal integrity across a wide temperature range from -55°C up to +150°C, making it safe for standard automotive and industrial applications.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552917938465,"sku":"","price":146.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/loctite-574-1_c5e8750e-5da8-4859-b0c2-1520ce8f856c.jpg?v=1687490047"},{"product_id":"loctite-si-587-rtv-silicone-sealant-blue","title":"Loctite SI 587 RTV Silicone Sealant 300ml","description":"\u003cp\u003e\u003cstrong\u003eLoctite SI 587 RTV Silicone Sealant \u003c\/strong\u003eis a metallic blue thixotropic oxime silicone paste engineered for maximum efficacy in gasketing and sealing applications. This industrial-grade adhesive permanently bonds and seals rigid or flexible joints, preventing costly fluid leaks caused by severe vibration, thermal cycling, and harsh automotive fluids. Whether you are securing oil pans or transmission covers, this premium silicone sealant provides a robust, leak-proof seal on all common substrates—including a wide range of metals and fabricated silicone gaskets.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose Loctite SI 587?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent Oil Resistance\u003c\/strong\u003e: \u003cem\u003eSpecially formulated to withstand continuous exposure to automotive engine oils and typical industrial fluids without breaking down.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Material Compatibility\u003c\/strong\u003e: \u003cem\u003eAdheres cleanly to a broad range of substrates and serves as an excellent adhesive for bonding or repairing fabricated silicone gaskets.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Load Bearing\u003c\/strong\u003e: \u003cem\u003eImproves the load-bearing and shock-absorbing characteristics of the bond area once fully cured.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThixotropic Paste Formula\u003c\/strong\u003e: \u003cem\u003eThe high-viscosity paste minimizes liquid migration, meaning it won't run, sag, or drip after application to the surface.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Temperature Endurance\u003c\/strong\u003e: \u003cem\u003eMaintains its flexible, dependable sealing performance across an extreme operational temperature range from -75°F to +500°F (-60°C to +260°C).\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type\u003c\/strong\u003e: Room Temperature Vulcanization (RTV) Oxime Silicone Paste\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrength\u003c\/strong\u003e: Flexible \/ Structural Bond\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Metallic Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size\u003c\/strong\u003e: 300ml\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: NSF Category P1 Registered, UL Classified (Plastics \u0026amp; Components, E257711)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSimple Application Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean\u003c\/strong\u003e: For optimal results, clean all internal and external surfaces with a compatible cleaning solvent and let dry completely to remove all traces of oil, grease, or old gasket material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply\u003c\/strong\u003e: Apply a continuous bead of the silicone paste to the prepared mating surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssemble\u003c\/strong\u003e: Align and press the components together within the skin-over time of the product. The formula will begin its room temperature vulcanization (RTV) curing process upon exposure to atmospheric moisture.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003ch4\u003eWhat is Loctite SI 587 used for?\u003c\/h4\u003e\n\u003cp\u003eLoctite SI 587 is a silicone sealant designed for form-in-place gasketing and sealing applications in plant maintenance and automotive production. It is specifically formulated to prevent equipment housings and fluid casings from leaking due to oil exposure, high operating temperatures, and mechanical shock.\u003c\/p\u003e\n\u003ch4\u003eCan Loctite SI 587 be disassembled?\u003c\/h4\u003e\n\u003cp\u003eYes. Although it creates an incredibly tough and resilient seal, cured silicone gaskets made with Loctite SI 587 can be disassembled by carefully separating the flange surfaces and using a standard gasket scraper or chemical removal solvent to clean off the residue.\u003c\/p\u003e\n\u003ch4\u003eDoes Loctite SI 587 work on metal surfaces?\u003c\/h4\u003e\n\u003cp\u003eYes. Loctite SI 587 offers robust performance across a wide range of materials. It adheres exceptionally well to standard metal assemblies as well as existing fabricated silicone components.\u003c\/p\u003e\n\u003ch4\u003eIs Loctite SI 587 safe for food processing environments?\u003c\/h4\u003e\n\u003cp\u003eLoctite SI 587 is registered to NSF Category P1. This means it is approved for use as a sealant in and around food processing areas, provided there is no possibility of direct food contact.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552918266145,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/files\/Loctite_SI_587_58775_234590_silicone_300ml_NA.webp?v=1781838699"},{"product_id":"loctite-si-587-blue-rtv-silicone-sealant","title":"Loctite SI 587 Blue RTV Silicone Sealant","description":"\u003ch2\u003eLoctite SI 587 Rtv Silicone Sealant Blue\u003c\/h2\u003e\u003cbr\u003e*Indent item\u003cul\u003e \u003cli\u003eTemperature : -75 - 500 °F\u003c\/li\u003e \u003cli\u003eViscosity : 13000 mPa.s (cP) Brookfield\u003c\/li\u003e \u003cli\u003eColor : Blue\u003c\/li\u003e \u003cli\u003eCuring Type : Room Temperature Vulcanization (RTV) Cure\u003c\/li\u003e \u003cli\u003eApplication : Gasketing or Sealing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp class=\"md-block-unstyled\"\u003eLOCTITE SI 587 is a metallic blue, thixotropic oxime silicone paste used for gasketing and sealing applications in plant maintenance and various sized OEMs. As a formed-in-place gasket\/sealant, it has been designed to give outstanding performance in typical automotive gasketing applications. This product is typically used in applications up to +500 °F (+260 °C).\u003c\/p\u003e\u003cul\u003e \u003cli\u003eExcellent resistance to automotive engine oils and adheres to a wide range of substrates\u003c\/li\u003e \u003cli\u003eExcellent adhesive for bonding and repairing fabricated silicone gaskets\u003c\/li\u003e \u003cli\u003eUsed in applications up to 500 °F (260 °C)\u003c\/li\u003e \u003cli\u003eThixotropic\u003c\/li\u003e \u003cli\u003eEnhances load bearing \u0026amp; shock absorbing characteristics of the bond area\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eRegistered to NSF Category P1\u003c\/strong\u003e for use as a sealant where\u003cbr\u003ethere is no possibility of food contact in and around food\u003cbr\u003eprocessing areas\u003cbr\u003e\u003cstrong\u003eClassified by Underwriters Laboratories Inc.® E257711 -\u003c\/strong\u003ePlastics \u0026amp; Components","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552918331681,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/loctite-si-587-rtv-silicone-sealant-blue-85g-henkel-authorized-distributor-ko7m_600.png?v=1687490062"},{"product_id":"loctite-si-593-silicone-adhesive-black","title":"Loctite SI 593 Silicone Adhesive Black 80ml","description":"\u003cp\u003e\u003cstrong\u003eLoctite SI 593 Silicone Adhesive Black \u003c\/strong\u003eis a general-purpose, one-part RTV black silicone adhesive sealant engineered for maximum efficacy in sealing and bonding mechanical assemblies. This industrial-grade adhesive permanently seals joints and gaps, preventing costly leaks, weather damage, and fluid ingress caused by extreme temperature cycling, UV light, or ozone exposure. Whether you are securing oven flues or weatherproofing ventilation units, this premium acetoxy silicone compound provides a robust, leak-proof seal on all industrial surfaces—including metals, glass, ceramics, and many plastics.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose Loctite SI 593?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoom Temperature Vulcanizing (RTV)\u003c\/strong\u003e: \u003cem\u003eMoisture cures at room temperature to form a tough, flexible rubber seal without requiring specialized heat curing equipment.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Slump Paste Consistency\u003c\/strong\u003e: \u003cem\u003eFormulated with thixotropic properties so it will not sag or flow, making it ideal for overhead and vertical applications.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSevere Environment Resistance\u003c\/strong\u003e: \u003cem\u003eSpecially engineered to withstand harsh ultraviolet light, ozone, and extreme weather conditions without hardening, shrinking, or cracking.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Substrate Compatibility\u003c\/strong\u003e: \u003cem\u003eProvides strong, reliable adhesion across diverse materials, functioning exceptionally well as a flexible bonding agent and dressing gasket.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Thermal Stability\u003c\/strong\u003e: \u003cem\u003eMaintains its flexible elastomeric properties across an expansive temperature range from -65°F to 450°F (-54°C to 232°C).\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type\u003c\/strong\u003e: Acetoxy Silicone Adhesive Sealant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrength\u003c\/strong\u003e: Flexible \/ High Elongation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size\u003c\/strong\u003e: 80ml\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: RoHS Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSimple Application Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean\u003c\/strong\u003e: For optimal results, clean all internal and external surfaces with a solvent-based surface cleaner (such as Loctite SF 7070) to ensure they are free of dirt, dust, and oil, then let dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply\u003c\/strong\u003e: Cut the applicator nozzle at a 45° angle to achieve your desired bead diameter (typically 1\/8\" to 1\/4\"). Apply a continuous bead of the black silicone paste directly to the joint interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssemble\u003c\/strong\u003e: Align and assemble the parts immediately. The formula will form a tack-free skin within 60 minutes and complete its full moisture cure within approximately 24 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003ch4\u003eWhat is Loctite SI 593 used for?\u003c\/h4\u003e\n\u003cp\u003eLoctite SI 593 is a flexible silicone adhesive sealant designed for general-purpose industrial sealing, bonding, and gasketing. It is specifically formulated to prevent component degradation, moisture ingress, and structural leaks due to severe thermal stress and environmental weathering.\u003c\/p\u003e\n\u003ch4\u003eCan Loctite SI 593 be disassembled?\u003c\/h4\u003e\n\u003cp\u003eYes. Because it cures into a flexible, elastomeric rubber seal rather than a rigid plastic, it can be disassembled by carefully cutting through the joint with a utility knife or scraping away the cured material using standard mechanical removal tools.\u003c\/p\u003e\n\u003ch4\u003eDoes Loctite SI 593 work on all surfaces?\u003c\/h4\u003e\n\u003cp\u003eYes. Loctite SI 593 offers robust performance across a vast array of materials. It is highly effective on non-porous surfaces like glass and ceramics, as well as structural surfaces like clean metals and industrial plastics. \u003cem\u003eNote: This silicone formulation cannot be painted over.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003eIs Loctite SI 593 safe for high-temperature environments?\u003c\/h4\u003e\n\u003cp\u003eLoctite SI 593 is rated for continuous operation up to 450°F (232°C). This makes it highly approved for use in demanding thermal environments like commercial oven flues, heating system collars, and industrial manufacturing plants.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552918397217,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/loctite-silicone-adhesive-black-80ml-si593.jpg?v=1687490068"},{"product_id":"loctite-si-595-rtv-adhesive-silicone","title":"Loctite SI 595 RTV Adhesive Silicone","description":"\u003cp\u003e\u003cstrong\u003eLoctite SI 595 RTV Adhesive Silicone (300ml)\u003c\/strong\u003e is a medium-viscosity clear acetoxy silicone sealant engineered for maximum efficacy in bonding and sealing mechanical assemblies. This industrial-grade adhesive permanently seals out moisture and contaminants, preventing costly leaks and corrosion caused by mechanical shock, vibration, or environmental exposure. Whether you are securing trim bonding or sealing ductwork, vents, flues, doors, and windows, this premium RTV silicone compound provides a robust, leak-proof seal on all common substrates—including ceramic, composite, glass, metal (aluminum and steel), and plastics.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Choose Loctite SI 595?\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuperior Adhesion and Flexibility\u003c\/strong\u003e: \u003cem\u003eCures on exposure to moisture in the air to form a tough, flexible, silicone rubber seal that fills large cracks and seams without slumping.\u003c\/em\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBroad Material Compatibility\u003c\/strong\u003e: \u003cem\u003eEngineered for excellent bonding properties across diverse surfaces like glass, metals, ceramics, and composites (not recommended for concrete).\u003c\/em\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtreme Environmental Resistance\u003c\/strong\u003e: \u003cem\u003eFormulated to withstand extreme temperature cycling, UV light, and ozone without hardening, shrinking, or cracking.\u003c\/em\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Reliability\u003c\/strong\u003e: \u003cem\u003eProvides dependable electrical insulation and protects delicate leads and components from mechanical shock.\u003c\/em\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFood Equipment Certified \u0026amp; Safe\u003c\/strong\u003e: \u003cem\u003eCertified to ANSI\/NSF Standard 51 for use with plastic materials and components in food equipment environments up to +204°C, and classified by Underwriters Laboratories Inc.® (E257711).\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type\u003c\/strong\u003e: Acetoxy Silicone Vulcanizing Compound Paste Sealant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStrength\u003c\/strong\u003e: Medium (Thixotropic, non-slumping paste)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Clear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContainer Size\u003c\/strong\u003e: 300ml\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: ANSI\/NSF Standard 51, Underwriters Laboratories Inc.® E257711\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSimple Application Instructions\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClean\u003c\/strong\u003e: For optimal performance, bond surfaces must be completely clean and free from grease, oil, or older sealant residues.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApply\u003c\/strong\u003e: Apply the thixotropic paste to the target area. Because moisture curing begins immediately upon exposure to the atmosphere, parts to be assembled should be mated within a few minutes after dispensing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAssemble\u003c\/strong\u003e: Assemble the components as required. Excess material can be easily wiped away using non-polar solvents. Note that full performance properties will develop over a 72-hour cure cycle.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\n\u003ch4\u003eWhat is Loctite SI 595 used for?\u003c\/h4\u003e\n\u003cp\u003eLoctite SI 595 is a 1-part RTV acetoxy silicone paste designed for potting, coating, and sealing applications. It is specifically formulated to prevent moisture infiltration and protect mechanical or electrical assemblies from environmental stress, mechanical shock, and severe weather conditions.\u003c\/p\u003e\n\n\u003ch4\u003eCan Loctite SI 595 be disassembled?\u003c\/h4\u003e\n\u003cp\u003eYes, cured silicone can be mechanically removed or peeled away by cutting the flexible bond with a sharp knife or razor edge. Any residual film or thin layers can be softened and wiped away using appropriate non-polar solvents.\u003c\/p\u003e\n\n\u003ch4\u003eDoes Loctite SI 595 work on all materials?\u003c\/h4\u003e\n\u003cp\u003eYes, Loctite SI 595 offers robust performance across a vast array of surfaces, including metals (aluminum and steel), glass, ceramics, composites, and most plastics. It is not recommended for use on concrete surfaces.\u003c\/p\u003e\n\n\u003ch4\u003eIs Loctite SI 595 safe for food equipment environments?\u003c\/h4\u003e\n\u003cp\u003eYes, Loctite SI 595 is certified to ANSI\/NSF Standard 51, making it approved for use with plastic materials and components utilized in food equipment applications, provided the operational temperature does not exceed +204°C.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552918593825,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/loctite-si-595-1.jpg?v=1687490072"},{"product_id":"loctite-si-596-red-rtv-silicone-adhesive-sealant","title":"Loctite SI 596 Red RTV Silicone Adhesive Sealant","description":"\u003cp\u003e\u003cstrong\u003eLoctite SI 596\u003c\/strong\u003e is a high-temperature red RTV silicone adhesive sealant engineered for maximum efficacy in gasketing and sealing assemblies. This industrial-grade adhesive permanently bonds and seals components, preventing costly leaks and structural failures caused by aging, weathering, and extreme thermal cycling. Whether you are securing high-temperature ducting or heating elements in electrical appliances, this premium silicone compound provides a robust, leak-proof seal on all common substrates—including metals, glass, ceramics, and plastics.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose Loctite SI 596 Heat Resistance?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Stability\u003c\/strong\u003e: \u003cem\u003eResists extreme thermal cycling and operates safely in temperatures ranging from -50 °C up to +250 °C (intermittently reaching up to +275 °C).\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormulated for Durability\u003c\/strong\u003e: \u003cem\u003eCures upon exposure to atmospheric moisture to form a tough, flexible, waterproof, and oil-resistant silicone rubber bond.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Shrinking or Cracking\u003c\/strong\u003e: \u003cem\u003eEngineered to withstand harsh environments without hardening, cracking, or losing volume over time.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal Heavy-Duty Use Cases\u003c\/strong\u003e: \u003cem\u003ePerfect for the assembly and repair of industrial furnaces, ovens, boilers, exhaust stacks, and heavy equipment gaskets.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffortless Application\u003c\/strong\u003e: \u003cem\u003eFeatures a flowable, self-leveling thixotropic consistency that fills gaps easily and simplifies vertical or overhead placement.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type\u003c\/strong\u003e: Room Temperature Vulcanizing (RTV) Silicone Adhesive\/Sealant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrength\u003c\/strong\u003e: High-Temperature Resistant \/ Flexible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size\u003c\/strong\u003e: 300ml\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: Industrial Gasketing \u0026amp; Sealing Standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSimple Application Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean\u003c\/strong\u003e: For optimal results, clean all internal and external surfaces to ensure they are completely clean and free from grease, oil, or old sealant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply\u003c\/strong\u003e: Apply the fluid silicone paste directly to the target area. Because moisture curing begins immediately upon exposure to the atmosphere, parts should be mated within a few minutes after dispensing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssemble\u003c\/strong\u003e: Assemble and tighten the parts as required. Full performance properties will develop over a 72-hour cure cycle, and excess material can be wiped away easily using non-polar solvents.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003ch4\u003eWhat is Loctite SI 596 used for?\u003c\/h4\u003e\n\u003cp\u003eLoctite SI 596 is a high-temperature RTV silicone sealant designed for industrial gasketing, potting, and sealing applications. It is specifically formulated to prevent component degradation or leaks due to extreme heat, thermal shock, and exposure to moisture or oils.\u003c\/p\u003e\n\u003ch4\u003eCan Loctite SI 596 be disassembled?\u003c\/h4\u003e\n\u003cp\u003eYes. While it forms a highly durable and permanent seal under operating conditions, the cured silicone rubber remains flexible and can be mechanically peeled or cut away with standard hand tools or scraping blades, with residues cleanable via non-polar solvents.\u003c\/p\u003e\n\u003ch4\u003eDoes Loctite SI 596 work on high-heat materials?\u003c\/h4\u003e\n\u003cp\u003eYes. Loctite SI 596 offers robust performance across a variety of materials. It is highly effective on both industrial metal alloys (found in furnaces, boilers, and exhausts) as well as glass, ceramics, and specialized high-temperature plastics.\u003c\/p\u003e\n\u003ch4\u003eIs Loctite SI 596 safe for extreme thermal environments?\u003c\/h4\u003e\n\u003cp\u003eLoctite SI 596 is specially rated for heavy industrial heating applications. This means it is approved for use in furnaces, ducting, and appliances, provided the continuous operating environment does not exceed its maximum intermittent limit of +275 °C.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552918659361,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/files\/LOCTITE_SI_596_Red_59675_198817_adhesive_300ml_NA_95946194-a383-42d7-9395-c7d4237ad7d1.webp?v=1782112154"},{"product_id":"loctite-si-596-red-rtv-silicone-sealant","title":"Loctite SI 596 Red RTV Silicone Sealant","description":"\u003cp\u003e\u003cstrong\u003eLoctite SI 596\u003c\/strong\u003e is a high-temperature red RTV silicone sealant engineered for maximum efficacy in gasketing and sealing applications. This industrial-grade adhesive permanently bonds and seals assemblies, preventing costly leaks and mechanical failures caused by aging, weathering, and extreme thermal cycling. Whether you are securing high-temperature ducting or heating elements in electrical appliances, this premium silicone rubber compound provides a robust, leak-proof seal on all common substrates—including metals, glass, ceramics, and plastics.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose Loctite SI 596 Heat Resistance?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Stability\u003c\/strong\u003e: \u003cem\u003eTypically used in applications with an operating range of -50 °C to +250 °C and can intermittently reach temperatures up to +275 °C without losing performance.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormulated for Durability\u003c\/strong\u003e: \u003cem\u003eCures on exposure to moisture in the air to form a tough, flexible, waterproof, and oil-resistant silicone rubber bond.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Shrinking or Cracking\u003c\/strong\u003e: \u003cem\u003eResists severe environmental aging, weathering, and repetitive thermal cycling without hardening, shrinking, or cracking.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal Heavy-Duty Use Cases\u003c\/strong\u003e: \u003cem\u003ePerfect for the assembly and repair of industrial furnaces, ovens, boilers, exhaust stacks, high-temperature ducting, and electrical appliances.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy \u0026amp; Self-Leveling Application\u003c\/strong\u003e: \u003cem\u003eFeatures a flowable, self-leveling thixotropic paste consistency (viscosity of 73,500 mPa·s) that simplifies uniform coverage on complex surfaces.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type\u003c\/strong\u003e: Room Temperature Vulcanizing (RTV) Silicone Sealant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrength\u003c\/strong\u003e: High-Temperature \/ Flexible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size\u003c\/strong\u003e: 80ml\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: Industrial Gasketing \u0026amp; Sealing Standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSimple Application Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean\u003c\/strong\u003e: For optimal results, clean all internal and external surfaces to ensure they are completely clean and free from grease or oil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply\u003c\/strong\u003e: Apply the fluid silicone paste directly to the target area. Because moisture curing begins immediately after the product is exposed to the atmosphere, parts to be assembled should be mated within a few minutes after the product is dispensed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssemble\u003c\/strong\u003e: Assemble the components as required. Full performance properties will develop over a 72-hour cure cycle, and any excess material can be easily wiped away with non-polar solvents.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003ch4\u003eWhat is Loctite SI 596 used for?\u003c\/h4\u003e\n\u003cp\u003eLoctite SI 596 is a high-temperature silicone adhesive and sealant designed for industrial gasketing and surface sealing. It is specifically formulated to prevent component leaks or deterioration due to extreme heat, thermal shock, and exposure to moisture or oils.\u003c\/p\u003e\n\u003ch4\u003eCan Loctite SI 596 be disassembled?\u003c\/h4\u003e\n\u003cp\u003eYes. While it forms a highly durable and permanent seal under normal operating conditions, the cured silicone rubber remains tough yet flexible. It can be mechanically removed or scraped away using standard hand tools, knives, or scraping blades, and any residual film can be cleaned with non-polar solvents.\u003c\/p\u003e\n\u003ch4\u003eDoes Loctite SI 596 work on high-heat materials?\u003c\/h4\u003e\n\u003cp\u003eYes. Loctite SI 596 offers robust performance across a wide array of industrial materials. It is highly effective on both high-temperature metal alloys (such as those found in furnaces, boilers, and exhausts) as well as glass, ceramics, and specialized plastics.\u003c\/p\u003e\n\u003ch4\u003eIs Loctite SI 596 safe for all environments?\u003c\/h4\u003e\n\u003cp\u003eLoctite SI 596 is highly safe for extreme thermal industrial applications, but it is not recommended for use in pure oxygen and\/or oxygen-rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552918692129,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/files\/LOCTITE_SI_596_RD_59630_135507_red_rtv_silicone_70ml_NA_0c56f394-b05f-4d47-bdc8-628ef301f261.webp?v=1782112255"},{"product_id":"loctite-si-598-black-rtv-silicone-sealant","title":"Loctite SI 598 Black RTV Silicone Sealant 300ml","description":"\u003cp\u003e\u003cstrong\u003eLoctite SI 598\u003c\/strong\u003e is a heavy-duty, room temperature vulcanizing (RTV) black oxime silicone paste sealant engineered for maximum efficacy in high-performance gasketing. This industrial-grade adhesive permanently seals mating surfaces, preventing costly fluid leaks and equipment failures caused by ageing, weathering, and severe thermal cycling. Whether you are securing oil pans and transmission pans or valve covers and timing gear covers, this premium silicone sealant provides a robust, leak-proof seal on all mating surfaces—including differential covers and valve guides.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose Loctite SI 598?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Leak Protection\u003c\/strong\u003e: *Cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket that resists shrinking, cracking, and hardening.*\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomotive Fluid Resistance\u003c\/strong\u003e: *Maintains exceptional resistance to automotive motor oils, transmission fluids, alcohol, and antifreeze solutions.*\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Joint Integrity\u003c\/strong\u003e: *Improves the load-bearing and shock-absorbing characteristics of the bonded area.*\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Applications\u003c\/strong\u003e: *Ideal for critical automotive and industrial components like oil pans, valve covers, transmission pans, and gear covers.*\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Temperature Range\u003c\/strong\u003e: *Maintains robust flexibility and performance across extreme temperatures ranging from -54 °C to +260 °C (-75 °F to +625 °F).*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type\u003c\/strong\u003e: Oxime Silicone Paste Sealant (1-part, thixotropic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrength\u003c\/strong\u003e: Flexible \/ Tough Elastic Bond\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Metallic Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size\u003c\/strong\u003e: 300ml Cartridge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuring Type\u003c\/strong\u003e: Room Temperature Vulcanizing (RTV) \/ Moisture Cure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSimple Application Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean\u003c\/strong\u003e: For best performance, ensure all bond surfaces are thoroughly clean and free from grease or old gasket material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply\u003c\/strong\u003e: Apply a continuous bead of the silicone paste sealant to the mating surface. Moisture curing begins immediately upon exposure to the atmosphere, so parts should be mated within a few minutes after dispensing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssemble\u003c\/strong\u003e: Assemble and tighten the parts as required. While handling strength is achieved quickly, full performance properties will develop over 72 hours. Excess material can be easily wiped away using non-polar solvents.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003ch4\u003eWhat is Loctite SI 598 used for?\u003c\/h4\u003e\n\u003cp\u003eLoctite SI 598 is a metallic black, thixotropic RTV silicone paste designed for high-performance gasketing. It is specifically formulated to prevent automotive and industrial fluid leaks from components subjected to intense vibration, thermal cycling, and continuous oil exposure.\u003c\/p\u003e\n\u003ch4\u003eCan Loctite SI 598 be disassembled?\u003c\/h4\u003e\n\u003cp\u003eYes. While it forms a tough, flexible rubber seal that resists aging and thermal stress, the cured silicone gasket can be manually separated during maintenance or overhaul using standard scraping tools and non-polar solvents to clean up excess residue.\u003c\/p\u003e\n\u003ch4\u003eDoes Loctite SI 598 work on all surfaces?\u003c\/h4\u003e\n\u003cp\u003eYes, it offers robust sealing performance across a wide variety of metal mating surfaces. It is highly effective on rigid flange assemblies such as oil pans, transmission housings, and differential covers. However, it is \u003cstrong\u003enot recommended\u003c\/strong\u003e for use as a cylinder head gasket or head gasket sealant.\u003c\/p\u003e\n\u003ch4\u003eIs Loctite SI 598 safe for all environments?\u003c\/h4\u003e\n\u003cp\u003eLoctite SI 598 is highly resistant to standard automotive fluids like motor oil and antifreeze. However, it is \u003cstrong\u003enot recommended\u003c\/strong\u003e for parts in constant contact with gasoline, nor should it be selected as a sealant for pure oxygen, chlorine, or other strong oxidizing systems.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552918757665,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/loctite-si-598.jpg?v=1687490082"},{"product_id":"loctite-si-5015-blue-rtv-adhesive-sealant","title":"Loctite SI 5015 Blue RTV Adhesive Sealant","description":"\u003cp\u003e\u003cstrong\u003eLOCTITE SI 5015\u003c\/strong\u003e is a commercial-grade, blue acetoxy silicone adhesive sealant engineered to deliver robust, flexible gaskets and seals for heavy-duty industrial applications. Formulated to cure upon exposure to atmospheric moisture, this high-performance RTV (Room Temperature Vulcanization) silicone transforms into a highly resilient, flexible rubber seal that eliminates common points of failure along critical mechanical joins.\u003c\/p\u003e\n\u003cp\u003eThis professional sealant is specifically developed to withstand harsh operating parameters without hardening, shrinking, or cracking under intense thermal cycles, erosion, or aging.\u003c\/p\u003e\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Thermal Stability:\u003c\/strong\u003e Maintains structural elasticity and operational integrity across an expansive engineering range from -54°C to +204°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration and Load Management:\u003c\/strong\u003e Enhances bearing load capacities and elevates the shock absorption profiles of assembled joint areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate Versatility:\u003c\/strong\u003e Direct adhesion onto a broad scope of industrial substrates, ensuring reliable sealing for stamped parts and variable metals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomotive Sensor Safe:\u003c\/strong\u003e Formulated to be completely safe for use with automotive oxygen sensors and sensitive electronics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficient Form-In-Place Gasketing:\u003c\/strong\u003e Designed for total board replacement or precise board preparation, reducing inventory overhead for pre-cut gaskets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Designation:\u003c\/strong\u003e LOCTITE SI 5015 (Superflex RTV Blue)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical Base:\u003c\/strong\u003e Acetoxy silicone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuring Mechanism:\u003c\/strong\u003e Room Temperature Vulcanization (RTV) Moisture Cure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range:\u003c\/strong\u003e -54°C to +204°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimal Storage Conditions:\u003c\/strong\u003e 8°C to 21°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Industrial Applications:\u003c\/strong\u003e Valve covers, transmission housings, gearboxes, differentials, water pumps, oil pans, and thermostat covers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUsage \u0026amp; Application Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Preparation:\u003c\/strong\u003e All mating flanges and components must be thoroughly clean, bone-dry, and cleared of old gasket material, oils, and process grease before applying the RTV sealant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Apply a continuous bead of LOCTITE SI 5015 to one flange surface. Assemble parts immediately to ensure uniform wet contact before skin-over occurs. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage Protocol:\u003c\/strong\u003e To maintain nominal physical and chemical traits, store the product in its unopened container within the strict 8°C to 21°C window. Avoid extreme environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003ch4\u003eWhat is the operational temperature range of LOCTITE SI 5015 Blue RTV?\u003c\/h4\u003e\n\u003cp\u003eLOCTITE SI 5015 is explicitly engineered to operate reliably within a thermal envelope of -54°C to +204°C. Its robust acetoxy silicone formulation prevents the material from hardening, shrinking, or cracking when subjected to continuous thermal cycling or environmental erosion.\u003c\/p\u003e\n\u003ch4\u003eIs LOCTITE SI 5015 safe for automotive oxygen sensors and electronic housings?\u003c\/h4\u003e\n\u003cp\u003eYes. LOCTITE SI 5015 Superflex Blue is fully compatible and safe for use with automotive oxygen sensors. Its chemical design prevents sensor fouling, making it an ideal choice for sealing critical powertrain and engine components such as valve covers, water pumps, and oil pans.\u003c\/p\u003e\n\u003ch4\u003eWhat are the explicit industrial storage parameters to maximize the shelf life of this RTV sealant?\u003c\/h4\u003e\n\u003cp\u003eTo avoid premature cross-linking or physical degradation, LOCTITE SI 5015 must be stored in its original, unopened packaging at a controlled temperature range between 8°C and 21°C. Storage outside of this specified range can permanently impair the product's curing and performance capabilities.\u003c\/p\u003e\n\u003ch3\u003eRequest Wholesale Pricing \u0026amp; Bulk Quotes\u003c\/h3\u003e\n\u003cp\u003eWe offer volume-based bulk pricing tiers on all commercial-grade LOCTITE maintenance and production items.\u003c\/p\u003e\n\u003cp\u003ePlease \u003ca href=\"mailto:sales@hongteckhin.com.sg\"\u003eContact Us\u003c\/a\u003e today to request a formal wholesale quotation or to confirm real-time inventory allocation for your facility.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552929276193,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/loctite-si-5015.jpg?v=1687490232"},{"product_id":"loctite-si-5145-rtv-silicone-transparent-sealant","title":"Loctite SI 5145 RTV Silicone Sealant","description":"\u003cp\u003e\u003cstrong\u003eLOCTITE SI 5145\u003c\/strong\u003e is a high-strength, clear, commercial-grade alkoxy silicone sealant and adhesive engineered explicitly for the bonding, sealing, and coating of sensitive electronic devices. This 1-part, neutral-curing RTV (Room Temperature Vulcanizing) silicone is formulated to resist severe environments, providing exceptional stability against weathering, moisture, and ozone without corroding delicate electronic circuitry.\u003c\/p\u003e\n\u003cp\u003eLOCTITE SI 5145 specialized non-slumping formula prevents migration during application, making it the ideal solution for reinforcing and strain-relieving delicate components in military, automotive, and industrial electronic systems.\u003c\/p\u003e\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronic-Grade Safety:\u003c\/strong\u003e Neutral-curing alkoxy formulation prevents the corrosion of sensitive electronics and delicate component connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Slumping Profile:\u003c\/strong\u003e High-viscosity structural integrity allows for clean placement, making it ideal for the reinforcement and strain relief of delicate components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSevere Environment Resistance:\u003c\/strong\u003e Provides industrial-strength defense against weathering, moisture, and ozone exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMilitary Specification Compliance:\u003c\/strong\u003e Tested to the stringent lot requirements of Military Specification Mil-A-46146B (regional approval).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Designation:\u003c\/strong\u003e LOCTITE SI 5145\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrength:\u003c\/strong\u003e High\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Clear \/ Transparent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuring Type:\u003c\/strong\u003e Room Temperature Vulcanizing (RTV) \/ Moisture Cure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Scope:\u003c\/strong\u003e Bonding, Sealing, or Coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Service Temperature:\u003c\/strong\u003e Up to 200°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance Standard:\u003c\/strong\u003e Tested to Mil-A-46146B lot requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimal Storage Temperature:\u003c\/strong\u003e 8°C to 21°C (Storage below 8°C or greater than 28°C can adversely affect product properties)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUsage \u0026amp; Application Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Preparation:\u003c\/strong\u003e For optimal bond performance, ensure all mating surfaces are thoroughly clean, dry, and entirely free from grease, oil, and industrial contaminants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMating Timeline:\u003c\/strong\u003e Moisture curing initiates immediately upon atmospheric exposure. Components must be mated and assembled within a few minutes after the product is dispensed to secure proper wet contact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Cure Duration:\u003c\/strong\u003e Full performance properties and maximum environmental resistance will fully develop over a 72-hour period.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean-Up Protocol:\u003c\/strong\u003e Excess uncured material can be easily wiped away and managed using\u003ca href=\"https:\/\/www.hongteckhin.com.sg\/products\/loctite-sf-7063-super-clean?srsltid=AfmBOorZRByPhuVXBV3JPs1fixnxmm86l1MfhdufbryZ7JcAuNPHYO7b\"\u003e Loctite 7063.\u003c\/a\u003e Do not return contaminated material to the original container.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003ch4\u003eDoes LOCTITE SI 5145 comply with military engineering specifications for electronics?\u003c\/h4\u003e\n\u003cp\u003eYes. LOCTITE SI 5145 is explicitly tested to the lot requirements of Military Specification Mil-A-46146B. Please note that this is a regional approval specification; contact your local technical service center for specific compliance documentation and clarification for your facility.\u003c\/p\u003e\n\u003ch4\u003eHow long does it take for LOCTITE SI 5145 to achieve full cure performance?\u003c\/h4\u003e\n\u003cp\u003eWhile moisture curing begins immediately upon exposure to the atmosphere, full physical and chemical performance properties develop over a 72-hour window. Because skinning and curing begin instantly, parts should be aligned and mated within a few minutes of dispensing.\u003c\/p\u003e\n\u003ch4\u003eWhat are the explicit industrial storage rules to protect LOCTITE SI 5145 from degradation?\u003c\/h4\u003e\n\u003cp\u003eLOCTITE SI 5145 must be stored in its original, unopened container in a dry location at an optimal temperature range between 8°C and 21°C. Storing the sealant below 8°C or above 28°C can permanently damage or alter its physical performance traits. To maintain product integrity, never return material removed during assembly back into the original packaging.\u003c\/p\u003e\n\u003ch3\u003eRequest Wholesale Pricing\u003c\/h3\u003e\n\u003cp\u003eWe offer tiered bulk pricing to corporate procurement managers and electronic assembly engineers.\u003c\/p\u003e\n\u003cp\u003ePlease \u003ca href=\"mailto:sales@hongteckhin.com.sg\"\u003eContact Us\u003c\/a\u003e directly to request a formal wholesale quote or to verify immediate inventory availability.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552929308961,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/loctite-si-5145.jpg?v=1687490237"},{"product_id":"loctite-5188-high-flexible-flange-sealant","title":"Loctite 5188 Flange Sealant","description":"\u003cp\u003e\u003cstrong\u003eLOCTITE 5188\u003c\/strong\u003e is a commercial-grade, highly flexible anaerobic sealant engineered specifically for rigid metal flanged connections. It cures efficiently when confined in the absence of air between close-fitting metal surfaces, delivering an instant, low-pressure seal immediately after assembly. Designed to optimize high-volume production lines, this form-in-place gasketing product excels on gearboxes, transmissions, and motor casings.\u003c\/p\u003e\n\u003cp\u003eIts specialized, highly flexible formula achieves superior adhesion on aluminum and steel, making it ideal for demanding applications subject to structural vibration or thermal stress. \u003c\/p\u003e\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Flexibility \u0026amp; Adhesion:\u003c\/strong\u003e Engineered for rigid metal flanges, offering exceptional performance and superior adhesion on aluminum substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil Contamination Tolerance:\u003c\/strong\u003e Formulated to maintain full sealing integrity even when minor oil contamination is present on the flange surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstant Sealing Capability:\u003c\/strong\u003e Provides immediate resistance to low online test pressures (\u0026lt;0.05 MPa) right after assembly before curing occurs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent Chemical Resistance:\u003c\/strong\u003e Formulated to withstand harsh chemical environments without shrinking, cracking, or losing joint tension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Designation:\u003c\/strong\u003e LOCTITE 5188\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical Type:\u003c\/strong\u003e Anaerobic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Sealing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Substrates:\u003c\/strong\u003e Metal (Aluminum, Steel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile Shear Strength:\u003c\/strong\u003e 7 N\/mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity Range:\u003c\/strong\u003e 14,000 - 32,000 mPa·s (cP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range:\u003c\/strong\u003e -65°F to +300°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimal Storage Temperature:\u003c\/strong\u003e 8°C to 21°C (Storage below 8°C or greater than 28°C can adversely affect product properties)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUsage \u0026amp; Application Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Preparation:\u003c\/strong\u003e For maximum performance, ensure all flange faces are clean, dry, and free from heavy grease. Before surface bonding, verify the compatibility of any aqueous washing solutions used, as some washes can affect product cure and performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Apply manually by screen printing, roller coating, or bead dispense. Tighten flanges as soon as possible after assembly to avoid shimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate Limitations:\u003c\/strong\u003e This product is not recommended for use on plastic substrates, particularly thermoplastic materials, where stress cracking could occur.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\n\u003cstrong\u003eSafety Warning:\u003c\/strong\u003e LOCTITE 5188 is not recommended for use in pure oxygen and\/or oxygen-rich systems and must not be selected as a sealant for chlorine or other strong oxidizing materials. Consult the Safety Data Sheet (SDS) for safe handling information.\u003c\/blockquote\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003ch4\u003eCan LOCTITE 5188 be used on assemblies with minor oil contamination?\u003c\/h4\u003e\n\u003cp\u003eYes. LOCTITE 5188 is engineered with a high tolerance for minor oil contamination on flange surfaces. However, for maximum structural adhesion and optimal chemical resistance, surfaces should be kept as clean and free from heavy industrial grease as possible.\u003c\/p\u003e\n\u003ch4\u003eWhat is the instant sealing capability of LOCTITE 5188 before it cures?\u003c\/h4\u003e\n\u003cp\u003eLOCTITE 5188 provides an immediate, low-pressure instant seal right after assembly while still uncured. Low online test pressures of less than 0.05 MPa can be applied immediately to confirm a complete seal and streamline production floor testing.\u003c\/p\u003e\n\u003ch4\u003eHow do large bond gaps affect the cure speed of LOCTITE 5188?\u003c\/h4\u003e\n\u003cp\u003eThe rate of anaerobic cure is directly affected by the bondline gap. If large gaps result in an unacceptably slow cure time, a Loctite activator can be applied to speed up the process. Because activators can alter the ultimate tensile shear strength, the specific gap and application conditions should be evaluated beforehand.\u003c\/p\u003e\n\u003ch4\u003eWhat are the explicit industrial storage parameters for LOCTITE 5188?\u003c\/h4\u003e\n\u003cp\u003eLOCTITE 5188 must be stored in its unopened original container in a dry location at an optimal temperature range of 8°C to 21°C. Storage below 8°C or above 28°C can irreversibly degrade the adhesive's physical properties. Never return any material removed from the container back into the original packaging to prevent contamination.\u003c\/p\u003e\n\u003ch3\u003eRequest Wholesale Pricing\u003c\/h3\u003e\n\u003cp\u003eWe offer corporate bulk pricing structures on all commercial-grade anaerobic sealants.\u003c\/p\u003e\n\u003cp\u003ePlease \u003ca href=\"mailto:sales@hongteckhin.com.sg\"\u003eContact Us\u003c\/a\u003e directly to request a formal wholesale quotation or to verify immediate stock availability for your production line.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552929472801,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/loctite-5188.jpg?v=1687490240"},{"product_id":"loctite-si-5366-rtv-silicone","title":"Loctite SI 5366 RTV Silicone Sealant","description":"\u003cp\u003e\u003cstrong\u003eLOCTITE SI 5366\u003c\/strong\u003e is a clear, commercial-grade one-component industrial acetoxy silicone sealant and adhesive engineered to deliver perfect sealing, structural adhesion, and robust environmental protection. Formulated to cure upon exposure to atmospheric moisture, this high-performance RTV (Room Temperature Vulcanizing) silicone transforms into a highly resilient rubber seal that eliminates common points of failure along critical mechanical joins.\u003c\/p\u003e\n\u003cp\u003eThis professional sealant is specifically developed to improve the bearing and shock absorption performance of the adhesive layer, ensuring structural integrity under dynamic loads.\u003c\/p\u003e\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecially Configured for Perfect Sealing:\u003c\/strong\u003e Delivers complete environmental insulation and leak-proof bonding across a diverse range of demanding maintenance applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-Component System:\u003c\/strong\u003e Ready to use out of the package with no mixing or precise measuring required, streamlining facility workflows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Load Management:\u003c\/strong\u003e Substantially improves the overall bearing load capacity and shock absorption performance of the bonded area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRapid Film Formation:\u003c\/strong\u003e Fast-skinning formula enables faster handling times and increased throughput on assembly processes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Designation:\u003c\/strong\u003e LOCTITE SI 5366\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical Base:\u003c\/strong\u003e Acetoxy silicone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Transparent \/ Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuring Mechanism:\u003c\/strong\u003e Room Temperature Vulcanizing (RTV) \/ Moisture Cure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShear Strength (Grit Blasted Aluminium):\u003c\/strong\u003e 7 N\/mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElongation at Break:\u003c\/strong\u003e 530%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging Base Size:\u003c\/strong\u003e 100g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Industrial Applications:\u003c\/strong\u003e Sealing train side windows, industrial heat sources (ovens, heat exchangers, steam circuits, water heaters), protection and insulation of electrical boxes, HCR silicone bonding, and general maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUsage \u0026amp; Application Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Preparation:\u003c\/strong\u003e All mating flanges and engineering substrates must be thoroughly clean, bone-dry, and cleared of old gasket material, oils, and process grease before applying the RTV sealant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Apply a continuous bead of LOCTITE SI 5366 to one of the prepared surfaces. Assemble parts immediately to ensure uniform wet contact before rapid film formation takes place.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety \u0026amp; Cleanup:\u003c\/strong\u003e Uncured residue can be effectively managed using \u003ca href=\"https:\/\/www.hongteckhin.com.sg\/products\/loctite-sf-7063-super-clean?srsltid=AfmBOorZRByPhuVXBV3JPs1fixnxmm86l1MfhdufbryZ7JcAuNPHYO7b\"\u003eLoctite 7063\u003c\/a\u003e. Ensure appropriate PPE is worn during bulk extrusion and handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003ch4\u003eWhat are the primary applications for LOCTITE SI 5366 in industrial environments?\u003c\/h4\u003e\n\u003cp\u003eLOCTITE SI 5366 is highly versatile and engineered for the sealing of train side windows, insulation and protection of electrical boxes, high-consistency rubber (HCR) silicone bonding, and general facility maintenance. It is also explicitly designed to withstand high-temperature settings, making it ideal for sealing heat sources like ovens, heat exchangers, steam circuits, and commercial water heaters.\u003c\/p\u003e\n\u003ch4\u003eHow does LOCTITE SI 5366 perform under mechanical vibration and shock?\u003c\/h4\u003e\n\u003cp\u003eThis commercial-grade adhesive is specifically formulated to optimize the bearing and shock absorption performance of the adhesive layer. With an elongation at break of 530% and a shear strength of 7 N\/mm² on grit-blasted aluminum, it flexes dynamically under load to prevent joint cracking or loss of tension from structural vibrations.\u003c\/p\u003e\n\u003ch4\u003eDoes LOCTITE SI 5366 RTV silicone require an external mixing or curing agent?\u003c\/h4\u003e\n\u003cp\u003eNo. LOCTITE SI 5366 is a one-component product, meaning no mixing, measuring, or external catalysts are required. Curing is initiated naturally through atmospheric moisture upon exposure to air, resulting in rapid film formation and a streamlined application on production lines.\u003c\/p\u003e\n\u003ch3\u003eRequest Wholesale Pricing\u003c\/h3\u003e\n\u003cp\u003eWe offer volume-based bulk pricing tiers on all commercial-grade LOCTITE items.\u003c\/p\u003e\n\u003cp\u003ePlease \u003ca href=\"mailto:sales@hongteckhin.com.sg\"\u003eContact Us\u003c\/a\u003e today to request a formal wholesale quotation or to verify immediate inventory allocation for your facility.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552929505569,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/loctite-si-5366.jpg?v=1687490244"},{"product_id":"loctite-si-5699-rtv-silicone-gasket-grey","title":"Loctite SI 5699 RTV Silicone Gasket Grey","description":"\u003cp\u003e\u003cstrong\u003eLOCTITE® SI 5699 \u003c\/strong\u003eis a commercial-grade, high-performance RTV (Room Temperature Vulcanizing) silicone gasket sealant engineered primarily for rigid flange sealing in heavy-duty industrial applications. Formulated for high-resistance to oils, water-glycol, and severe operational vibrations, this flexible silicone sealant cures upon exposure to atmospheric moisture to form a tough, durable rubber gasket. It is the industrial standard for sealing cast metal housings, transmissions, and stamped sheet metal covers.\u003c\/p\u003e\n\u003cp\u003eAs a leading industrial supplier, we maintain this product in stock to support your production and maintenance timelines. Ideal for volume procurement, our commercial-grade formulations ensure high-reliability performance across demanding industrial environments.\u003c\/p\u003e\n\u003ch3\u003eKey Features \u0026amp; Industrial Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior Oil \u0026amp; Fluid Resistance:\u003c\/strong\u003e Specifically engineered for high-reliability sealing on rigid flanges, including transmissions and cast metal housings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRapid Tack-Free Time:\u003c\/strong\u003e Achieves a tack-free state in just 10 minutes, minimizing assembly line downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Glycol Compatibility:\u003c\/strong\u003e Ideal for stamped sheet metal covers and machined or cast surfaces where water-glycol resistance is critical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertified Compliance:\u003c\/strong\u003e Registered to NSF Category P1 (Reg. No. 122998) for use as a sealant in and around food processing areas where there is no possibility of food contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuring Type:\u003c\/strong\u003e Room Temperature Vulcanizing (RTV)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile Shear Strength:\u003c\/strong\u003e 1.7 N\/mm² (determined according to ISO 4587)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Cure Temperature:\u003c\/strong\u003e 77°F (23±2 °C, 60±5% RH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Substrates:\u003c\/strong\u003e Metal, Plastic (machined, cast, or stamped surfaces)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Flange Sealing \/ Gasketing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimal Storage Conditions:\u003c\/strong\u003e Store unopened between 8°C to 21°C. Storage below 8°C or greater than 28°C can adversely affect product properties.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Preparation:\u003c\/strong\u003e For optimal bonding, ensure all surfaces are clean, dry, and thoroughly degreased.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Moisture curing begins immediately upon exposure to air. Mate parts within a few minutes of dispensing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuring:\u003c\/strong\u003e Allow the bond to fully cure before subjecting the component to heavy service loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleanup:\u003c\/strong\u003e Excess uncured material can be easily wiped away using non-polar solvents. Ensure your maintenance team is equipped with proper PPE during handling.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cblockquote\u003e\n\u003cstrong\u003eUsage Restrictions:\u003c\/strong\u003e LOCTITE SI 5699 is not recommended for contact with gasoline. Do not use in pure oxygen and\/or oxygen-rich systems, and do not select as a sealant for chlorine or other strong oxidizing materials.\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is LOCTITE SI 5699 resistant to gasoline or petroleum fuels?\u003c\/strong\u003e\u003cbr\u003eA: No. LOCTITE SI 5699 exhibits excellent resistance to automotive oils and water-glycol mixtures, but it is explicitly not recommended for continuous contact with gasoline or high-solvent petroleum fuels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How long does it take for LOCTITE SI 5699 to fully cure?\u003c\/strong\u003e\u003cbr\u003eA: LOCTITE SI 5699 becomes tack-free within 10 minutes at room temperature. However, the depth of cure depends heavily on environmental temperature and humidity. For heavy service loads, a full cure cycle of up to seven (7) days is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can LOCTITE SI 5699 be used in food processing facilities?\u003c\/strong\u003e\u003cbr\u003eA: Yes. LOCTITE SI 5699 holds an NSF International P1 Registration (No. 122998). It is approved for use as a sealant in and around food processing areas, provided there is no possibility of direct food contact.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRequest a Bulk Pricing Quote\u003c\/h3\u003e\n\u003cp\u003eLooking to secure wholesale volume pricing for your assembly line or facility maintenance? Streamline your procurement process with a trusted regional industrial partner. \u003ca href=\"mailto:sales@hongteckhin.com.sg\"\u003eContact Us\u003c\/a\u003e today to request a comprehensive bulk quote or check current stock availability for your scheduled production runs.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552930128161,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/loctite-si-5699.jpg?v=1687490254"},{"product_id":"loctite-si-5699-rtv-grey-silicone-gasket-maker","title":"Loctite SI 5699 RTV Grey Silicone Gasket Maker 300ml","description":"\u003cp\u003e\u003cstrong\u003eLOCTITE® SI 5699 \u003c\/strong\u003eis a commercial-grade, high-performance RTV (Room Temperature Vulcanizing) silicone gasket sealant engineered primarily for rigid flange sealing in heavy-duty industrial applications. Formulated for high resistance to oils, water-glycol, and severe operational vibrations, this flexible silicone sealant cures upon exposure to atmospheric moisture to form a tough, durable rubber gasket. It is the industrial standard for sealing cast metal housings, transmissions, and stamped sheet metal covers.\u003c\/p\u003e\n\u003ch3\u003eKey Features \u0026amp; Industrial Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior Oil \u0026amp; Fluid Resistance:\u003c\/strong\u003e Specifically engineered for high-reliability sealing on rigid flanges, including transmissions and cast metal housings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRapid Tack-Free Time:\u003c\/strong\u003e Achieves a tack-free state in just 10 minutes, minimizing assembly line downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Glycol Compatibility:\u003c\/strong\u003e Ideal for stamped sheet metal covers and machined or cast surfaces where water-glycol resistance is critical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertified Compliance:\u003c\/strong\u003e Registered to NSF Category P1 (Reg. No. 122998) for use as a sealant in and around food processing areas where there is no possibility of food contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Room Temperature Vulcanizing (RTV) Silicone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile Shear Strength:\u003c\/strong\u003e 1.7 N\/mm² (determined according to ISO 4587 on grit-blasted mild steel lapshears at a bond gap of 0.5 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Cure Temperature Condition:\u003c\/strong\u003e 77°F (23±2 °C, 60±5% RH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Substrates:\u003c\/strong\u003e Metal, Plastic (machined, cast, or stamped surfaces)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Flange Sealing \/ Gasketing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimal Storage Conditions:\u003c\/strong\u003e Store unopened between 8°C to 21°C. Storage below 8°C or greater than 28°C can adversely affect product properties.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Preparation:\u003c\/strong\u003e For best performance, bond surfaces must be clean, dry, and thoroughly free from grease or residual contaminants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Moisture curing begins immediately upon exposure to the atmosphere. Mate parts within a few minutes after the product is dispensed. For fully automated high-volume production lines, a [Link to: Volumetric Dispensing System] is highly recommended.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuring:\u003c\/strong\u003e Allow the bond to fully cure before subjecting components to heavy service loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleanup:\u003c\/strong\u003e Excess uncured material can be easily wiped away using non-polar solvents. Ensure your maintenance team is equipped with proper PPE during handling.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cblockquote\u003e\n\u003cstrong\u003eUsage Restrictions:\u003c\/strong\u003e LOCTITE SI 5699 is not recommended for contact with gasoline. Do not use in pure oxygen and\/or oxygen-rich systems, and do not select as a sealant for chlorine or other strong oxidizing materials.\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is LOCTITE SI 5699 resistant to gasoline or petroleum fuels?\u003c\/strong\u003e\u003cbr\u003eA: No. LOCTITE SI 5699 exhibits excellent resistance to automotive oils and water-glycol mixtures, but it is explicitly not recommended for continuous contact with gasoline or high-solvent petroleum fuels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How long does it take for LOCTITE SI 5699 to fully cure?\u003c\/strong\u003e\u003cbr\u003eA: LOCTITE SI 5699 becomes tack-free within 10 minutes at room temperature. However, the exact depth of cure depends heavily on environmental temperature and humidity. For heavy service loads, a full cure cycle of up to seven (7) days is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can LOCTITE SI 5699 be used in food processing facilities?\u003c\/strong\u003e\u003cbr\u003eA: Yes. LOCTITE SI 5699 holds an NSF International P1 Registration (No. 122998). It is approved for use as a sealant in and around food processing areas, provided there is no possibility of direct food contact.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRequest a Bulk Pricing Quote\u003c\/h3\u003e\n\u003cp\u003eLooking to secure wholesale volume pricing for your assembly line or facility maintenance? Streamline your procurement process with a trusted regional industrial supplier. \u003ca href=\"mailto:sales@hongteckhin.com.sg\"\u003eContact Us\u003c\/a\u003e today to request a comprehensive bulk quote or check current stock availability for your scheduled production runs.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552930423073,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/files\/Loctite_SI_5699_18581_135270_grey_silicone_300ml_NA-1.webp?v=1783664723"},{"product_id":"loctite-si-5900-black-rtv-silicone-sealant","title":"Loctite SI 5900 Black RTV Silicone Sealant","description":"\u003cp\u003e\u003cstrong\u003eLOCTITE® SI 5900\u003c\/strong\u003e is a commercial-grade, low-strength, moisture-cured thixotropic silicone-based paste engineered primarily for high-reliability flange sealing on rigid assemblies. Formulated to withstand severe joint movement without compromising seal integrity, this single-component RTV silicone requires no mixing and reduces liquid migration immediately following application to the substrate.\u003c\/p\u003e\n\u003ch3\u003eKey Features \u0026amp; Industrial Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Joint-Movement Tolerance:\u003c\/strong\u003e Explicitly engineered to withstand continuous joint movement and thermal expansion without structural failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent Fluid \u0026amp; Oil Resistance:\u003c\/strong\u003e Ideal for demanding automotive and industrial machinery applications, including oil sumps and timing covers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced Product Migration:\u003c\/strong\u003e The thixotropic paste consistency minimizes liquid migration immediately after application, ensuring precise bead placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Cure Pressure Testing:\u003c\/strong\u003e Capable of withstanding on-line, low-pressure integrity tests carried out before the product begins to cure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertified Compliance:\u003c\/strong\u003e Registered to NSF Category P1 for use as a sealant in and around food processing areas where there is no possibility of direct food contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Room Temperature Vulcanizing (RTV) Silicone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity:\u003c\/strong\u003e Thixotropic paste\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile Shear Strength:\u003c\/strong\u003e 1.2 N\/mm² (determined according to ISO 4587 on Aluminum lapshears at a bond gap of 0.5 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin-Over Time:\u003c\/strong\u003e 15 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Gap Fill:\u003c\/strong\u003e Up to 1 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Substrates:\u003c\/strong\u003e Metal, Plastic, Glass, and Ceramics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure Speed Condition:\u003c\/strong\u003e Progresses via atmospheric moisture at 23±2 °C, 60±5% RH (Depth of cure depends on temperature and humidity)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimal Storage Conditions:\u003c\/strong\u003e Store unopened in a dry location between 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Preparation:\u003c\/strong\u003e For maximum engineered performance, ensure all bond surfaces are completely clean and free from grease, oil, or residual contaminants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDispensing \u0026amp; Assembly:\u003c\/strong\u003e Since moisture curing begins immediately upon atmospheric exposure, parts should be mated within a few minutes after dispensing. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuring Cycle:\u003c\/strong\u003e Allow the bond line to fully cure before subjecting components to heavy service loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleanup \u0026amp; Safety:\u003c\/strong\u003e Excess uncured silicone material can be easily wiped away using non-polar solvents. Ensure operators are equipped with appropriate PPE before handling; consult the Safety Data Sheet (SDS) for comprehensive precautions.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cblockquote\u003e\n\u003cstrong\u003eUsage Restrictions:\u003c\/strong\u003e LOCTITE SI 5900 is not recommended for use in pure oxygen and\/or oxygen-rich systems. Do not select this product as a sealant for chlorine or other strong oxidizing materials.\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the maximum gap-filling capability of LOCTITE SI 5900?\u003c\/strong\u003e\u003cbr\u003eA: LOCTITE SI 5900 thixotropic paste is engineered to fill gaps effectively up to a maximum of 1 mm on machined, stamped, or cast mating flanges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can LOCTITE SI 5900 undergo pressure testing immediately after application?\u003c\/strong\u003e\u003cbr\u003eA: Yes. LOCTITE SI 5900 is uniquely formulated to withstand on-line, low-pressure quality control tests carried out before the silicone material has fully initiated its moisture cure cycle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is LOCTITE SI 5900 NSF certified for food-contact environments?\u003c\/strong\u003e\u003cbr\u003eA: LOCTITE SI 5900 holds an NSF International Category P1 registration. It is certified for commercial use as a sealant in and around food processing areas, provided there is no operational possibility of direct food contact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How fast does LOCTITE SI 5900 form a skin?\u003c\/strong\u003e\u003cbr\u003eA: This RTV silicone exhibits a rapid skin-over time of approximately 15 minutes under standard atmospheric conditions (23±2 °C, 60±5% RH), meaning components should be mated immediately after dispensing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRequest a Bulk Pricing Quote\u003c\/h3\u003e\n\u003cp\u003eOptimize your assembly line procurement with a dependable wholesale hardware and adhesive supplier. \u003ca href=\"mailto:sales@hongteckhin.com.sg\"\u003eContact Us\u003c\/a\u003e today to receive custom bulk pricing configurations, check current stock levels, or obtain technical data validation for your specific production parameters.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552930488609,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/loctite-si-5900.jpg?v=1687490262"},{"product_id":"loctite-si-5910-rtv-silicone-flange-sealant-50ml","title":"Loctite SI 5910 Rtv Silicone Flange Sealant 50ml","description":"\u003cp\u003e\u003cstrong\u003eLOCTITE SI 5910\u003c\/strong\u003e is a low-strength, room-temperature vulcanizing (RTV) silicone gasketing compound engineered specifically for flexible flanges with machined or cast surfaces. Formulated to withstand significant joint movement and continuous oil exposure, this thixotropic paste reduces liquid migration post-application, ensuring a precise and reliable seal on both metal and plastic substrates.\u003c\/p\u003e\n\u003ch3\u003eKey Applications \u0026amp; Industrial Uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped Sheet Metal Covers:\u003c\/strong\u003e Optimized for timing covers, oil sumps, and valve covers where high oil resistance is mandatory.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Flange Sealing:\u003c\/strong\u003e Ideal for assemblies requiring excellent gap-filling capabilities (up to 1 mm) and resistance to continuous joint movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Substrate Bonding:\u003c\/strong\u003e Provides high-adhesion sealing across both machined metal surfaces and structural plastics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e LOCTITE SI 5910 (50ml)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuring Type:\u003c\/strong\u003e Room Temperature Vulcanizing (RTV) Moisture Cure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity:\u003c\/strong\u003e Thixotropic Paste (Resists migration after application)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Substrates:\u003c\/strong\u003e Metal, Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Gap Fill:\u003c\/strong\u003e Up to 1 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth of Cure (in 24 hours):\u003c\/strong\u003e 2.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile Shear Strength:\u003c\/strong\u003e 1.2 N\/mm² (Determined according to ISO 4587 on Aluminum lapshears at a bond gap of 0.5 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e -65°F to 500°F (-54°C to 260°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication \u0026amp; Handling Guidelines\u003c\/h3\u003e\n\u003cp\u003eFor optimal bonding performance, ensure all surfaces are thoroughly clean and free from grease or residual oil using \u003ca href=\"https:\/\/www.hongteckhin.com.sg\/products\/loctite-sf-7063-super-clean?srsltid=AfmBOoobIzw3xCyP-IkuvPim6lIgGRlHSfA13olCADPSwxdbYRqcdbez\"\u003eLoctite 7063\u003c\/a\u003e. Because moisture curing begins immediately upon exposure to the atmosphere, components must be mated within a few minutes of dispensing. Allow the assembly to fully cure before subjecting it to heavy service loads. Excess uncured material can be easily removed using non-polar solvents.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety \u0026amp; Storage Notice:\u003c\/strong\u003e This product is not recommended for use in pure oxygen or oxygen-rich systems, and must not be selected as a sealant for chlorine or other strong oxidizing materials. Store in the original unopened container in a dry location at an optimal storage temperature between 8°C and 21°C.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum gap-filling capability of LOCTITE SI 5910?\u003c\/strong\u003e\u003cbr\u003eLOCTITE SI 5910 is designed to seal flexible flange gaps up to 1 mm. For automated production lines, a volumetric dispensing system is recommended to maintain consistent bead application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it take for LOCTITE SI 5910 to fully cure?\u003c\/strong\u003e\u003cbr\u003eMoisture curing begins immediately upon exposure to air. It achieves a cure-through volume depth of 2.75 mm within 24 hours (at 23±2°C, 60±5% RH). For assemblies subjected to heavy service loads, a full cure time of up to 7 days is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan LOCTITE SI 5910 be used on plastic flanges?\u003c\/strong\u003e\u003cbr\u003eYes. LOCTITE SI 5910 exhibits excellent adhesion to both machined\/cast metal surfaces and engineered plastic substrates, making it highly versatile for multi-material flange designs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs LOCTITE SI 5910 resistant to automotive fluids?\u003c\/strong\u003e\u003cbr\u003eYes, this commercial-grade RTV silicone is specifically formulated to provide superior resistance to automotive oils, lubricants, and environmental joint movement, making it the industry standard for oil pan and timing cover seals.\u003c\/p\u003e\n\u003ch3\u003eSecure Wholesale \u0026amp; Bulk Pricing\u003c\/h3\u003e\n\u003cp\u003eStreamline your procurement with competitive \u003cstrong\u003ewholesale\u003c\/strong\u003e pricing and dependable volume lead times. To request a formal commercial quote or inquire about bulk contract pricing, please \u003ca href=\"mailto:sales@hongteckhin.com.sg\"\u003eContact Us\u003c\/a\u003e today to speak with our sales team.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552930521377,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/loctite-si-5910-rtv-silicone-flange-sealant-50ml-loctite-authorized-distributor-care_600.png?v=1687490265"},{"product_id":"loctite-si-5910-black-rtv-silicone-sealant","title":"Loctite SI 5910 Black RTV Silicone Sealant 300ml","description":"\u003cp\u003e\u003cstrong\u003eLOCTITE SI 5910\u003c\/strong\u003e is a low-strength, room-temperature vulcanizing (RTV) silicone gasketing compound engineered specifically for flexible flanges with machined or cast surfaces. Formulated to withstand significant joint movement and continuous oil exposure, this thixotropic paste reduces liquid migration post-application, ensuring a precise and reliable seal on both metal and plastic substrates.\u003c\/p\u003e\n\u003ch3\u003eKey Applications \u0026amp; Industrial Uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped Sheet Metal Covers:\u003c\/strong\u003e Optimized for timing covers, oil sumps, and valve covers where high oil resistance is mandatory.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Flange Sealing:\u003c\/strong\u003e Ideal for assemblies requiring excellent gap-filling capabilities (up to 1 mm) and resistance to continuous joint movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Substrate Bonding:\u003c\/strong\u003e Provides high-adhesion sealing across both machined metal surfaces and structural plastics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e LOCTITE SI 5910 (50ml)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuring Type:\u003c\/strong\u003e Room Temperature Vulcanizing (RTV) Moisture Cure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity:\u003c\/strong\u003e Thixotropic Paste (Resists migration after application)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Substrates:\u003c\/strong\u003e Metal, Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Gap Fill:\u003c\/strong\u003e Up to 1 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth of Cure (in 24 hours):\u003c\/strong\u003e 2.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile Shear Strength:\u003c\/strong\u003e 1.2 N\/mm² (Determined according to ISO 4587 on Aluminum lapshears at a bond gap of 0.5 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e -65°F to 500°F (-54°C to 260°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication \u0026amp; Handling Guidelines\u003c\/h3\u003e\n\u003cp\u003eFor optimal bonding performance, ensure all surfaces are thoroughly clean and free from grease or residual oil using \u003ca href=\"https:\/\/www.hongteckhin.com.sg\/products\/loctite-sf-7063-super-clean?srsltid=AfmBOoobIzw3xCyP-IkuvPim6lIgGRlHSfA13olCADPSwxdbYRqcdbez\"\u003eLoctite 7063\u003c\/a\u003e. Because moisture curing begins immediately upon exposure to the atmosphere, components must be mated within a few minutes of dispensing. Allow the assembly to fully cure before subjecting it to heavy service loads. Excess uncured material can be easily removed using non-polar solvents.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety \u0026amp; Storage Notice:\u003c\/strong\u003e This product is not recommended for use in pure oxygen or oxygen-rich systems, and must not be selected as a sealant for chlorine or other strong oxidizing materials. Store in the original unopened container in a dry location at an optimal storage temperature between 8°C and 21°C.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum gap-filling capability of LOCTITE SI 5910?\u003c\/strong\u003e\u003cbr\u003eLOCTITE SI 5910 is designed to seal flexible flange gaps up to 1 mm. For automated production lines, a volumetric dispensing system is recommended to maintain consistent bead application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it take for LOCTITE SI 5910 to fully cure?\u003c\/strong\u003e\u003cbr\u003eMoisture curing begins immediately upon exposure to air. It achieves a cure-through volume depth of 2.75 mm within 24 hours (at 23±2°C, 60±5% RH). For assemblies subjected to heavy service loads, a full cure time of up to 7 days is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan LOCTITE SI 5910 be used on plastic flanges?\u003c\/strong\u003e\u003cbr\u003eYes. LOCTITE SI 5910 exhibits excellent adhesion to both machined\/cast metal surfaces and engineered plastic substrates, making it highly versatile for multi-material flange designs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs LOCTITE SI 5910 resistant to automotive fluids?\u003c\/strong\u003e\u003cbr\u003eYes, this commercial-grade RTV silicone is specifically formulated to provide superior resistance to automotive oils, lubricants, and environmental joint movement, making it the industry standard for oil pan and timing cover seals.\u003c\/p\u003e\n\u003ch3\u003eSecure Wholesale \u0026amp; Bulk Pricing\u003c\/h3\u003e\n\u003cp\u003eStreamline your procurement with competitive \u003cstrong\u003ewholesale\u003c\/strong\u003e pricing and dependable volume lead times. To request a formal commercial quote or inquire about bulk contract pricing, please \u003ca href=\"mailto:sales@hongteckhin.com.sg\"\u003eContact Us\u003c\/a\u003e today to speak with our sales team.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552930652449,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/loctite-si-5910.jpg?v=1687490268"},{"product_id":"loctite-si-5920-copper-silicone-rtv","title":"Loctite SI 5920 Copper Silicone RTV","description":"\u003cp\u003e\u003cstrong\u003eLOCTITE SI 5920\u003c\/strong\u003e is a commercial-grade, low-strength silicone-based gasketing compound engineered for maximum reliability on flexible flanges with machined or cast surfaces. Specially formulated for heavy-duty industrial applications, this copper silicone RTV provides superior resistance to extreme thermal environments, making it the premier choice for automotive, manufacturing, and plant maintenance operations.\u003c\/p\u003e\n\u003cp\u003eThis non-corrosive, moisture-curing sealant is designed to fill gaps measuring up to 1 mm while maintaining its physical integrity under rigorous operating conditions, and it serves as an effective electrical insulating material.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e LOCTITE® SI 5920™ Copper Silicone RTV Gasket (70ml)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuring Type:\u003c\/strong\u003e Room Temperature Vulcanizing (RTV) \/ Moisture Curing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity:\u003c\/strong\u003e Thixotropic paste (reduced migration after application)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e -65°F to 700°F (-54°C to 350°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile Shear Strength:\u003c\/strong\u003e 203.05 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Substrates:\u003c\/strong\u003e Metal, Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Gap:\u003c\/strong\u003e Up to 1 mm maximum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme Thermal Resistance:\u003c\/strong\u003e Outperforms standard sealants in continuous-use environments up to 350°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThixotropic Formulation:\u003c\/strong\u003e Minimizes liquid migration and run-off immediately after application to the substrate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Corrosive Compound:\u003c\/strong\u003e Safe for use on sensitive metals and electrical insulating applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Flange Compatibility:\u003c\/strong\u003e Specifically designed to accommodate joint movement on machined or cast mating surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDirections for Use \u0026amp; Storage\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Preparation:\u003c\/strong\u003e Ensure all bond surfaces are thoroughly clean, dry, and free from grease or residual oils before application. For optimal surface preparation, use a compatible industrial cleaner [Link to: Degreasing Solvents].\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Moisture curing begins immediately upon atmospheric exposure. Mate and secure parts within a few minutes of dispensing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Cure:\u003c\/strong\u003e Allow the bond to fully cure before subjecting the assembly to heavy service loads. Excess material can be removed using non-polar solvents.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimal Storage:\u003c\/strong\u003e Store unopened in a dry location between 8°C and 21°C. Storage below 8°C or above 28°C may adversely alter product properties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eGeneral Usage Disclosures:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e This product is not recommended for contact with gasoline. Do not use in pure oxygen and\/or oxygen-rich systems, and do not select as a sealant for chlorine or other strong oxidizing materials. Consult the Safety Data Sheet (SDS) prior to handling.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003ch4\u003eWhat is the maximum temperature limit for LOCTITE SI 5920?\u003c\/h4\u003e\n\u003cp\u003eLOCTITE SI 5920 is engineered specifically for high-temperature resistance, safely handling intermittent thermal exposure up to 700°F (350°C) and maintaining flexibility down to -65°F (-54°C).\u003c\/p\u003e\n\u003ch4\u003eCan LOCTITE SI 5920 copper silicone be used in contact with fuel?\u003c\/h4\u003e\n\u003cp\u003eNo, LOCTITE SI 5920 is not recommended for applications where it comes into direct or prolonged contact with gasoline or petroleum-based fuels.\u003c\/p\u003e\n\u003ch4\u003eHow long does it take for LOCTITE SI 5920 RTV to fully cure?\u003c\/h4\u003e\n\u003cp\u003eMoisture curing begins immediately upon atmospheric exposure. While parts should be mated within minutes of application, a full cure can take up to seven days under standard conditions before the assembly is subjected to heavy operational loads.\u003c\/p\u003e\n\u003ch4\u003eWhat is the maximum gap fill capability of this silicone sealant?\u003c\/h4\u003e\n\u003cp\u003eLOCTITE SI 5920 can be effectively applied in joint and flange gaps measuring up to a maximum of 1 mm.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRequest Wholesale \u0026amp; Bulk Pricing\u003c\/h3\u003e\n\u003cp\u003eAre you procuring for a commercial facility or large-scale manufacturing run? Secure competitive volume discounts and reliable lead times from an authorized distributor. \u003ca href=\"mailto:sales@hongteckhin.com.sg\"\u003eContact Us\u003c\/a\u003e today to receive a technical quote or place a bulk order.\u003c\/p\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552930685217,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/loctite-si-5920.jpg?v=1687490272"},{"product_id":"loctite-mr-5923-aviation-gasket-dressing-sealant","title":"Loctite MR 5923 Aviation Gasket Dressing Sealant","description":"\u003cdiv class=\"markdown markdown-main-panel enable-updated-hr-color force-compact-layout tutor-markdown-rendering\" id=\"model-response-message-contentr_a966aa876b83bfa7\" aria-busy=\"false\" aria-live=\"polite\" dir=\"ltr\"\u003e\n\u003cdiv class=\"attachment-container unknown\"\u003e\n\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\n\u003cdiv class=\"gen-ui-html-container\"\u003e\n\u003cp\u003e\u003cstrong\u003eLOCTITE MR 5923\u003c\/strong\u003e is a commercial-grade, slow-drying liquid thread and gasket sealant engineered for maximum reliability across close-fitting parts, machined surfaces, and threaded connections. Specially formulated for heavy-duty industrial, aircraft, and marine applications, this dark reddish-brown viscous liquid changes to a pliable, tacky film through controlled solvent evaporation, ensuring a highly dependable seal for aviation and marine engines.\u003c\/p\u003e\n\u003cp\u003eThis high-performing dressing compound is designed specifically for tight-tolerance assemblies, maintaining excellent flexible setting properties and reliable chemical resistance under rigorous operating conditions.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e LOCTITE® MR 5923™ Aviation Gasket Dressing Sealant (473ml)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity:\u003c\/strong\u003e Flow similar to SAE 10 Motor Oil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Brown (Dark Reddish Brown)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuring Type:\u003c\/strong\u003e Air dry \/ Solvent evaporation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetting Type:\u003c\/strong\u003e Flexible setting \/ Pliable, tacky film\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e -54°C to +204°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Applications:\u003c\/strong\u003e Solid gasket dressing, close-fitting machined surfaces, threaded connections, aviation engines, and marine engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineered for Close Tolerances:\u003c\/strong\u003e Ideal for precision-machined flanges and low-clearance joint profiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Work Time:\u003c\/strong\u003e Slow-drying formula allows ample time for complex multi-bolt alignments and meticulous part positioning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior Fluid Resistance:\u003c\/strong\u003e Retains its full sealing and material properties in continuous contact with water, ethylene glycol, gasoline, motor oil, transmission fluid, and sea water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Assembly Integrity:\u003c\/strong\u003e Cures to a pliable film that absorbs structural vibration and thermal expansion without joint failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDirections for Use \u0026amp; Storage\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Preparation:\u003c\/strong\u003e Remove all previous material from mating surfaces. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Remove cap and apply a uniform film using the integrated brush-top applicator. When utilizing as a gasket dressing, spread the product evenly with a spatula onto one side of the gasket, position it onto the assembly, coat the second side, and re-assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperational Readiness:\u003c\/strong\u003e The assembly becomes operational after 4 hours of air drying; a full cure is effectively achieved after 24 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean-Up:\u003c\/strong\u003e Clean hands immediately with commercial hand cleaners. The cured sealant can be removed from metal surfaces using isopropyl alcohol; for long-term or high-temperature dried films, cover with alcohol and allow it to soften overnight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimal Storage:\u003c\/strong\u003e Store product in the unopened container in a dry location between 8°C and 21°C. Storage below 8°C or greater than 28°C can adversely affect product properties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eGeneral Usage Disclosures:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e This product is not recommended for use in pure oxygen and\/or oxygen-rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. For safe handling information, consult the Safety Data Sheet (SDS).\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003ch4\u003eWhat is the temperature range for LOCTITE MR 5923?\u003c\/h4\u003e\n\u003cp\u003eLOCTITE MR 5923 is typically used in rugged industrial environments with a continuous operating temperature range of -54°C to +204°C.\u003c\/p\u003e\n\u003ch4\u003eIs LOCTITE MR 5923 resistant to automotive and marine fluids?\u003c\/h4\u003e\n\u003cp\u003eYes, this aviation gasket dressing retains its effective sealing properties when subjected to water, ethylene glycol, gasoline, motor oil, transmission fluid, and sea water.\u003c\/p\u003e\n\u003ch4\u003eHow long does it take for LOCTITE MR 5923 to fully cure?\u003c\/h4\u003e\n\u003cp\u003eThe assembly is safe to return to light operations after 4 hours of air drying, while a full cure is achieved after 24 hours of solvent evaporation.\u003c\/p\u003e\n\u003ch4\u003eCan this sealant be used as a standalone gasket or a dressing?\u003c\/h4\u003e\n\u003cp\u003eLOCTITE MR 5923 is optimized to function both as a standalone sealant for close-tolerance machined surfaces and threaded connections, and as a flexible dressing compound applied to solid gaskets.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRequest Wholesale \u0026amp; Bulk Pricing\u003c\/h3\u003e\n\u003cp\u003eAre you procuring for an aviation facility, marine workshop, or large-scale manufacturing plant? Secure competitive volume discounts and reliable lead times from an authorized industrial supplier. \u003ca href=\"about:invalid#zClosurez\"\u003eContact Us\u003c\/a\u003e today to receive a technical quote or place a bulk order.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552930717985,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/loctite-mr-5923.png?v=1687490276"},{"product_id":"loctite-si-5926-silicone-adhesive-blue","title":"Loctite SI 5926 Silicone Adhesive Blue","description":"\u003cdiv dir=\"ltr\" aria-live=\"polite\" aria-busy=\"false\" id=\"model-response-message-contentr_ff1dd94393d81920\" class=\"markdown markdown-main-panel enable-updated-hr-color force-compact-layout tutor-markdown-rendering\"\u003e\n\u003cp data-path-to-node=\"1\"\u003eLOCTITE® SI 5926™ is a commercial-grade, multi-purpose flexible silicone sealant engineered to deliver reliable performance in demanding industrial applications. As a room temperature vulcanizing (RTV) silicone, it cures upon exposure to atmospheric moisture to form a tough, high-integrity rubber gasket that resists vibration, thermal expansion, and contraction.\u003c\/p\u003e\n\u003cp data-path-to-node=\"2\"\u003eDesigned for professional engineering and automotive maintenance applications, this RTV blue silicone compound maintains its flexibility without hardening, shrinking, or cracking under intense environmental cycles. It offers excellent resistance to common automotive and industrial fluids, including motor oil, transmission fluids, alcohol, and antifreeze solutions.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"3\"\u003eApplications \u0026amp; Substrates\u003c\/h3\u003e\n\u003cp data-path-to-node=\"4\"\u003eThis versatile industrial sealant bonds effectively to \u003cb data-index-in-node=\"55\" data-path-to-node=\"4\"\u003emetal\u003c\/b\u003e, \u003cb data-index-in-node=\"62\" data-path-to-node=\"4\"\u003eplastic\u003c\/b\u003e, and \u003cb data-index-in-node=\"75\" data-path-to-node=\"4\"\u003epainted parts\u003c\/b\u003e. Typical applications include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"5,0,0\"\u003eValve covers and timing gear covers\u003c\/li\u003e\n\u003cli data-path-to-node=\"5,1,0\"\u003eDifferential covers and oil\/transmission pans\u003c\/li\u003e\n\u003cli data-path-to-node=\"5,2,0\"\u003eWater pumps and thermostat housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"7\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"8,0,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,0,0\"\u003eProduct:\u003c\/b\u003e LOCTITE SI 5926 Blue 40ml\u003c\/li\u003e\n\u003cli data-path-to-node=\"8,1,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,1,0\"\u003eColor:\u003c\/b\u003e Blue\u003c\/li\u003e\n\u003cli data-path-to-node=\"8,2,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,2,0\"\u003eCuring Type:\u003c\/b\u003e Room Temperature Vulcanizing (RTV) \/ Moisture Curing\u003c\/li\u003e\n\u003cli data-path-to-node=\"8,3,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,3,0\"\u003eViscosity:\u003c\/b\u003e Flow similar to SAE 10 Motor Oil\u003c\/li\u003e\n\u003cli data-path-to-node=\"8,4,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,4,0\"\u003eOperating Temperature Range:\u003c\/b\u003e -54°C to +204°C (-54°C to +150°C for specific continuous exposure applications)\u003c\/li\u003e\n\u003cli data-path-to-node=\"8,5,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,5,0\"\u003eKey Substrates:\u003c\/b\u003e Metal, Plastic, and Painted Surfaces\u003c\/li\u003e\n\u003cli data-path-to-node=\"8,6,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,6,0\"\u003ePrimary Application:\u003c\/b\u003e Gasketing and Sealant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"9\"\u003eApplication \u0026amp; Curing Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"10,0,0\"\u003eSurface Preparation:\u003c\/b\u003e For optimal bond strength, ensure all surfaces are thoroughly clean, dry, and completely free from grease or oil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"10,1,0\"\u003eAssembly:\u003c\/b\u003e Moisture curing begins immediately upon exposure to the atmosphere. Parts must be mated within a few minutes after the product is dispensed to ensure proper sealing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"10,2,0\"\u003eFull Cure:\u003c\/b\u003e Allow the bond to fully cure (up to seven days depending on bead thickness and humidity) before subjecting components to heavy service loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"10,3,0\"\u003eClean-up:\u003c\/b\u003e Excess uncured material can be easily wiped away using non-polar solvents. For cleanup and surface prep, ensure your team is equipped with \u003ca href=\"https:\/\/www.hongteckhin.com.sg\/products\/loctite-sf-7063-super-clean?srsltid=AfmBOoobIzw3xCyP-IkuvPim6lIgGRlHSfA13olCADPSwxdbYRqcdbez\"\u003eLoctite 7063\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr data-path-to-node=\"11\"\u003e\n\u003ch3 data-path-to-node=\"12\"\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003ch4 data-path-to-node=\"13\"\u003eIs LOCTITE SI 5926 safe for use on fuel systems or cylinder heads?\u003c\/h4\u003e\n\u003cp data-path-to-node=\"14\"\u003eNo. LOCTITE SI 5926 is strictly not recommended for use as a cylinder head gasket or a head gasket sealant. Additionally, it should not be used on components that come into direct, constant contact with gasoline.\u003c\/p\u003e\n\u003ch4 data-path-to-node=\"15\"\u003eWhat is the maximum operating temperature for LOCTITE SI 5926?\u003c\/h4\u003e\n\u003cp data-path-to-node=\"16\"\u003eLOCTITE SI 5926 is rated for a broad operating temperature range of -54°C to +204°C, making it highly effective for high-heat environments like engine pans, water pumps, and valve covers.\u003c\/p\u003e\n\u003ch4 data-path-to-node=\"17\"\u003eHow long does it take for LOCTITE SI 5926 to fully cure?\u003c\/h4\u003e\n\u003cp data-path-to-node=\"18\"\u003eMoisture curing starts immediately upon exposure to air. While parts should be joined within minutes of dispensing, the sealant should be allowed to cure for up to seven days before subjecting the assembly to maximum operational stress or heavy service loads.\u003c\/p\u003e\n\u003chr data-path-to-node=\"19\"\u003e\n\u003ch3 data-path-to-node=\"20\"\u003eBulk Pricing \u0026amp; Wholesale Ordering\u003c\/h3\u003e\n\u003cp data-path-to-node=\"21\"\u003eWe support procurement managers and commercial buyers with competitive tier pricing and rapid fulfillment.\u003c\/p\u003e\n\u003cp data-path-to-node=\"22\"\u003eTo request a wholesale quote or to check current stock levels for high-volume orders, please \u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003ca data-ved=\"0CAAQ_4QMahcKEwin6JWvx8eVAxUAAAAAHQAAAAAQHg\" data-hveid=\"0\" class=\"ng-star-inserted\" href=\"mailto:sales@hongteckhin.com.sg\" rel=\"noopener\" target=\"_blank\"\u003eContact Us\u003c\/a\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e today.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552930914593,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/loctite-si-5926.jpg?v=1687490279"},{"product_id":"loctite-mr-gs1","title":"LOCTITE MR GS1","description":"\u003ch2 class=\"product__titleSpan\"\u003eLOCTITE MR GS1\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eViscosity : Very high\u003c\/li\u003e \u003cli\u003eColor : Red brown\u003c\/li\u003e \u003cli\u003eCuring Type : Solvent evaporation\u003c\/li\u003e \u003cli\u003eApplication : Sealing\u003c\/li\u003e\n\u003c\/ul\u003eLOCTITE® MR GS1 Gasket Sealant for extended gasket life, fast drying, rigid cure. LOCTITE Gasket Sealant 1 is asolvent based, reliable, paste-like gasket sealant, dressing, and coating. Sets quickly to a hard set and is recommended for rigid, permanent assemblies. Use to 400F. Resistant to gasoline and other solvents.Applications include threaded connections, air ducts, plumbing connections.\u003cbr\u003eLOCTITE®\u003cbr\u003eMR GS 1™ is a reddish brown, viscous, fast\u003cbr\u003edrying paste that changes to a hard, semi flexible seal through\u003cbr\u003esolvent evaporation. It seals flanges, fittings, connections and\u003cbr\u003eassemblies against leakage.\u003cbr\u003eTypical applications include freeze plugs, industrial sealant for\u003cbr\u003epermanent assemblies, threaded connections, manifold\u003cbr\u003egaskets, air ducts, boilers, pipe fittings and plumbing\u003cbr\u003econnections\u003cbr\u003e\u003ch6\u003eTYPICAL CURING PERFORMANCE\u003c\/h6\u003e\u003cbr\u003eLOCTITE®\u003cbr\u003eMR GS 1™ , once applied, develops a hard,\u003cbr\u003esemi-flexible sealant by solvent evaporation. Dry times will\u003cbr\u003evary with temperature, humidity and gap.\u003cbr\u003e\u003ch6\u003eChemical\/Solvent Resistance\u003c\/h6\u003e\u003cbr\u003eLOCTITE®\u003cbr\u003eMR GS 1™ retains effective properties in contact\u003cbr\u003ewith water, ethylene glycol, gasoline, motor oil, transmission\u003cbr\u003efluid and sea water.\u003cbr\u003e\u003ch6 style=\"padding-top: 14px;\"\u003eGENERAL INFORMATION\u003c\/h6\u003e\u003cbr\u003e\u003cstrong\u003eThis product is not recommended for use in pure oxygen\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eand\/or oxygen rich systems and should not be selected as\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ea sealant for chlorine or other strong oxidizing materials.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eFor safe handling information on this product, consult the\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eSafety Data Sheet (SDS).\u003c\/strong\u003e\u003cbr\u003e\u003ch6\u003eDirections for use\u003c\/h6\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eRemove all previous material from mating surfaces.\u003c\/li\u003e \u003cli\u003eFor best results, clean and dry all surfaces with a residuefree solvent.\u003c\/li\u003e \u003cli\u003eRemove cap, puncture tube (using self-piercing cap) or\u003cbr\u003ecartridge seal and attach extension nozzle (if provided).\u003c\/li\u003e \u003cli\u003eWhen used as a gasket dressing, spread product with a\u003cbr\u003espatula to a uniform film on one side of gasket and then\u003cbr\u003eposition it on the assembly. Coat the second side of\u003cbr\u003egasket and re-assemble.\u003c\/li\u003e \u003cli\u003eAssembly is operational after 2 hours, full cure is effective\u003cbr\u003eafter 24 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eClean-up\u003c\/h6\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eLOCTITE®\u003cbr\u003eMR GS 1™ can be removed from metal\u003cbr\u003esurfaces with isopropanol. If the sealant has been dried\u003cbr\u003efor a long time or at high temperatures, cover the sealant\u003cbr\u003ewith alcohol and allow to soften overnight.\u003c\/li\u003e \u003cli\u003eClean hands with hand cleaners.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eNot for product specifications\u003c\/h6\u003e\u003cbr\u003eThe technical data contained herein are intended as reference\u003cbr\u003eonly. Please contact your local quality department for\u003cbr\u003eassistance and recommendations on specifications for this\u003cbr\u003eproduct.\u003cbr\u003e\u003ch6\u003eStorage\u003c\/h6\u003e\u003cbr\u003eStore product in the unopened container in a dry location.\u003cbr\u003eStorage information may be indicated on the product container\u003cbr\u003elabeling.\u003cbr\u003e\u003cstrong\u003eOptimal Storage: 8 °C to 21 °C. Storage below 8 °C or\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003egreater than 28 °C can adversely affect product properties.\u003c\/strong\u003e\u003cbr\u003eMaterial removed from containers may be contaminated during\u003cbr\u003euse. Do not return product to the original container. Henkel\u003cbr\u003eCorporation cannot assume responsibility for product which\u003cbr\u003ehas been contaminated or stored under conditions other than\u003cbr\u003ethose previously indicated. If additional information is required,\u003cbr\u003eplease contact your local Technical Service Center or\u003cbr\u003eCustomer Service Representative.\u003cbr\u003e ","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552959226145,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/download-1.jpg?v=1687490577"},{"product_id":"loctite-mr-5009","title":"LOCTITE MR 5009","description":"\u003ch2 class=\"product__titleSpan\"\u003eLOCTITE MR 5009\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eSpecific Gravity Temperature : 25 °C\u003c\/li\u003e \u003cli\u003eViscosity : Medium\u003c\/li\u003e \u003cli\u003eColor : Red\u003c\/li\u003e \u003cli\u003eCuring Type : Solvent evaporation\u003c\/li\u003e \u003cli\u003eApplication : Gasket sealant\u003c\/li\u003e\n\u003c\/ul\u003eLOCTITE® MR 5009 is a red, viscous, solvent-based liquid with a characteristic odor which is a blend of elastomers and resins in acetone. It is brushable and dries quickly to a highly tacky film and is designed to seal or bond rubber, cork, felt, paper and metal gaskets. It seals threaded hose connections, waterproofs and protects electrical terminals and wiring.\u003cul\u003e \u003cli\u003eApplies easily\u003c\/li\u003e \u003cli\u003eFast drying\u003c\/li\u003e \u003cli\u003ePrevents seizing\u003c\/li\u003e \u003cli\u003eAssures correct gasket alignment\u003c\/li\u003e \u003cli\u003eColor coded for uniform application\u003c\/li\u003e \u003cli\u003eAllows easy disassembly\u003c\/li\u003e \u003cli\u003eResists most automotive and industrial fluids\u003c\/li\u003e\n\u003c\/ul\u003eLOCTITE®\u003cbr\u003eMR 5009™ is a red colored viscous liquid with a\u003cbr\u003echaracteristic solvent odor which is a blend of elastomers and\u003cbr\u003eresins that is brushable and dries quickly to a highly tacky film.\u003cbr\u003eIt is designed to seal or bond rubber, cork, felt, paper and metal\u003cbr\u003egaskets. It seals threaded hose connections, waterproofs and\u003cbr\u003eprotects electrical terminals and wiring.\u003cbr\u003eTypical applications include gaskets, threaded connections,\u003cbr\u003ehose connections, weatherstripping, waterproofing for electrical\u003cbr\u003eterminals, spark plugs and wires, rear axle assembly, tubeless\u003cbr\u003etyre beads, differential assemblies, filter lin connections and\u003cbr\u003eterminal protector.\u003cbr\u003e\u003ch6\u003eGENERAL INFORMATION\u003c\/h6\u003e\u003cbr\u003e\u003cstrong\u003eThis product is not recommended for use in pure oxygen\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eand\/or oxygen rich systems and should not be selected as\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ea sealant for chlorine or other strong oxidizing materials.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eFor safe handling information on this product, consult the\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eSafety Data Sheet (SDS).\u003c\/strong\u003e\u003cbr\u003e\u003ch6\u003eDirections for use:\u003c\/h6\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eClean surfaces to remove all dirt, oil, rust, paints and dried\u003cbr\u003esealants. Keep surfaces dry and free from mold release\u003cbr\u003eagents.\u003c\/li\u003e \u003cli\u003eUsing brush, apply a thin, even coat on both surfaces to\u003cbr\u003ebe assembled.\u003c\/li\u003e \u003cli\u003eAllow to set until solvent has evaporated and film is dry.\u003c\/li\u003e \u003cli\u003eAssemble parts. Pre-coat gaskets or bolts for\u003cbr\u003econvenience in assembling.\u003c\/li\u003e \u003cli\u003eRemove with lacquer thinner.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eLoctite Material Specification\u003c\/h6\u003e\u003cbr\u003eLMS dated July-25, 2001. Test reports for each batch are\u003cbr\u003eavailable for the indicated properties. LMS test reports include\u003cbr\u003eselected QC test parameters considered appropriate to\u003cbr\u003especifications for customer use. Additionally, comprehensive\u003cbr\u003econtrols are in place to assure product quality and\u003cbr\u003econsistency. Special customer specification requirements may\u003cbr\u003ebe coordinated through Henkel Quality.\u003cbr\u003e\u003ch6\u003eStorage\u003c\/h6\u003e\u003cbr\u003eStore product in the unopened container in a dry location.\u003cbr\u003eStorage information may be indicated on the product container\u003cbr\u003elabeling.\u003cbr\u003e\u003cstrong\u003eOptimal Storage: 8 °C to 21 °C. Storage below 8 °C or\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003egreater than 28 °C can adversely affect product properties.\u003c\/strong\u003e\u003cbr\u003eMaterial removed from containers may be contaminated during\u003cbr\u003euse. Do not return product to the original container. Henkel\u003cbr\u003eCorporation cannot assume responsibility for product which\u003cbr\u003ehas been contaminated or stored under conditions other than\u003cbr\u003ethose previously indicated. If additional information is required,\u003cbr\u003eplease contact your local Technical Service Center or\u003cbr\u003eCustomer Service Representative.\u003cbr\u003e \u003cbr\u003e ","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552959717665,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/MER-G5009.jpg?v=1687490592"},{"product_id":"dowsil-rtv-3145-adhesive-sealant-clear-90ml","title":"Dowsil RTV 3145 Adhesive-Sealant Clear 90ml","description":"\u003ch2\u003eDowsil RTV 3145 Adhesive\/Sealant Clear 90ml\u003c\/h2\u003e\u003cbr\u003eDow DOWSIL™ 3145 RTV MIL-A-46146 Adhesive Sealant Clear is a one component, room temperature curing, silicone adhesive that is used for assembling print wire boards and sealing housings, modules, and electrical leads. It is non-flowing and has high elongation, tensile, and tear strength.\u003cbr\u003e\u003ch6\u003eFEATURES \u0026amp; BENEFITS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eNon-flowing\u003c\/li\u003e \u003cli\u003eRoom temperature cure\u003c\/li\u003e \u003cli\u003eHigh tensile\/tear strength and elongation\u003c\/li\u003e \u003cli\u003eMIL-A-46146 Group II, TY I\u003c\/li\u003e \u003cli\u003eNo mixing required\u003c\/li\u003e \u003cli\u003eRoom temperature cure, no ovens required\u003c\/li\u003e \u003cli\u003eFaster in-line processing with optional heat acceleration\u003c\/li\u003e \u003cli\u003eCan be considered for uses with Mil Spec requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6 class=\"md-block-header-two\"\u003eAPPLICATIONS\u003c\/h6\u003e\u003cbr\u003eDOWSIL™ 3145 RTV MIL-A-46146 Adhesive Sealant – Clear is suitable for:\u003cul\u003e \u003cli\u003eSealing openings in modules and housings\u003c\/li\u003e \u003cli\u003eAssembly of components on printed wiring board (PWB)\u003c\/li\u003e \u003cli\u003eSealing in and around wired and electrical leads\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003ePREPARING SURFACES\u003c\/h6\u003e\u003cbr\u003eAll surfaces should be thoroughly\u003cbr\u003ecleaned and\/or degreased with\u003cbr\u003eDow OS Fluids, naphtha, mineral\u003cbr\u003espirits, methyl ethyl ketone (MEK) or\u003cbr\u003eother suitable solvent. Solvents such\u003cbr\u003eas acetone or isopropyl alcohol (IPA)\u003cbr\u003edo not tend to remove oils well, and\u003cbr\u003eany oils remaining on the surface may\u003cbr\u003einterfere with adhesion. Light surface\u003cbr\u003eabrasion is recommended whenever\u003cbr\u003epossible, because it promotes good\u003cbr\u003ecleaning and increases the surface area\u003cbr\u003efor bonding. A final surface wipe with\u003cbr\u003eacetone or IPA is also useful. Some\u003cbr\u003ecleaning techniques may provide better results than others; users should\u003cbr\u003edetermine the best techniques for their\u003cbr\u003eparticular applications.\u003cbr\u003e\u003ch6\u003eSUBSTRATE TESTING\u003c\/h6\u003e\u003cbr\u003eDue to the wide variety of substrate\u003cbr\u003etypes and differences in substrate\u003cbr\u003esurface conditions, general statements\u003cbr\u003eon adhesion and bond strength are\u003cbr\u003eimpossible. To ensure maximum bond\u003cbr\u003estrength on a particular substrate,\u003cbr\u003ecohesive failure of the product in a lap\u003cbr\u003eshear or similar test is needed to\u003cbr\u003eensure compatibility of the adhesive\u003cbr\u003ewith the substrate being considered.\u003cbr\u003eAlso, this test can be used to\u003cbr\u003edetermine minimum cure time or to\u003cbr\u003edetect the presence of surface\u003cbr\u003econtaminants such as mold release\u003cbr\u003eagents, oils, greases and oxide films.\u003cbr\u003e\u003ch6\u003eSOLVENT EXPOSURE\u003c\/h6\u003e\u003cbr\u003eThe silicone adhesive discussed in this\u003cbr\u003eliterature is intended only to survive\u003cbr\u003esplash or intermittent exposures. It is\u003cbr\u003enot suited for continuous solvent or\u003cbr\u003efuel exposure. Testing should be done\u003cbr\u003eto confirm performance of the\u003cbr\u003eadhesives under these conditions.\u003cbr\u003e\u003ch3\u003eFIRE-FIGHTING MEASURES\u003c\/h3\u003e\u003cbr\u003e\u003cstrong\u003eSuitable extinguishing media\u003c\/strong\u003e\u003cul\u003e \u003cli\u003eWater spray.\u003c\/li\u003e \u003cli\u003eAlcohol-resistant foam.\u003c\/li\u003e \u003cli\u003eCarbon dioxide (CO2).\u003c\/li\u003e \u003cli\u003eDry chemical.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eUnsuitable extinguishing\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003emedia\u003c\/strong\u003e\u003cul\u003e \u003cli\u003eNone known.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eFire Fighting Procedures\u003c\/strong\u003e\u003cul\u003e \u003cli\u003eUse water spray to cool unopened containers\u003c\/li\u003e \u003cli\u003eEvacuate area\u003c\/li\u003e \u003cli\u003eCollect contaminated fire extinguishing water separately. This must not be discharged into\u003cbr\u003edrains.\u003c\/li\u003e \u003cli\u003eFire residues and contaminated fire extinguishing water must be disposed of in\u003cbr\u003eaccordance with local regulations.\u003c\/li\u003e \u003cli\u003eUse extinguishing measures that are appropriate to local circumstances and the surrounding\u003cbr\u003eenvironment.\u003c\/li\u003e \u003cli\u003eRemove undamaged containers from fire area if it is safe to do so\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eSpecial protective\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eequipment for firefighters\u003c\/strong\u003e\u003cul\u003e \u003cli\u003eIn the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eACCIDENTAL RELEASE MEASURES\u003c\/h3\u003e\u003cbr\u003e\u003cstrong\u003ePersonal precautions,\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eprotective equipment and\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eemergency procedures \u003c\/strong\u003e\u003cul\u003e \u003cli\u003eUse personal protective equipment. Follow safe handling advice and personal protective equipment recommendations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eEnvironmental\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eprecautions \u003c\/strong\u003e\u003cul\u003e \u003cli\u003eDischarge into the environment must be avoided. Prevent further\u003cbr\u003eleakage or spillage if safe to do so. Retain and dispose of contaminated wash water. Local\u003cbr\u003eauthorities should be advised if significant spillages cannot be contained.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eMethods and materials for\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003econtainment and cleaning \u003c\/strong\u003e\u003cstrong\u003eup\u003c\/strong\u003e\u003cul\u003e \u003cli\u003eWipe up or scrape up and contain for\u003cbr\u003esalvage or disposal. Local or national regulations may apply to releases and disposal of this material,\u003cbr\u003eas well as those materials and items employed in the cleanup of releases. You will need to determine\u003cbr\u003ewhich regulations are applicable. For large spills, provide dyking or other appropriate containment to\u003cbr\u003ekeep material from spreading. If dyked material can be pumped, store recovered material in\u003cbr\u003eappropriate container\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHANDLING AND STORAGE\u003c\/h3\u003e\u003cbr\u003e\u003cstrong\u003eAdvice on safe handling\u003c\/strong\u003e\u003cul\u003e \u003cli\u003eDo not get on skin or clothing.\u003c\/li\u003e \u003cli\u003eDo not swallow.\u003c\/li\u003e \u003cli\u003eAvoid contact with eyes.\u003c\/li\u003e \u003cli\u003eTake care to prevent spills, waste and minimize release to the environment.\u003c\/li\u003e \u003cli\u003eHandle in accordance with good industrial hygiene and safety practice.\u003c\/li\u003e \u003cli\u003eCONTAINERS MAY BE HAZARDOUS WHEN EMPTY. Since emptied containers retain product residue follow all (M)SDS and label warnings even after container is emptied.\u003c\/li\u003e \u003cli\u003eUse only with adequate ventilation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eAdvice on storage\u003c\/strong\u003e\u003cul\u003e \u003cli\u003eKeep in properly labelled containers.\u003c\/li\u003e \u003cli\u003eStore locked up.\u003c\/li\u003e \u003cli\u003eStore in accordance with the particular national regulations.\u003c\/li\u003e \u003cli\u003eDo not store with the following product types: Strong oxidizing agents.\u003c\/li\u003e \u003cli\u003eUnsuitable materials for containers: None known.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e \u003cbr\u003e \u003cbr\u003e \u003cbr\u003e \u003cbr\u003e \u003cbr\u003e \u003cbr\u003e ","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552975511841,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/dow-corning-3145-clear-90ml_431x431_6988f9af-d7e1-4fca-a517-b06432d882fe.jpg?v=1687490782"},{"product_id":"dowsil-rtv-3140-coating-non-corrosive-90ml","title":"Dowsil RTV 3140 Coating Non-Corrosive 90ml","description":"\u003ch2\u003eDowsil RTV 3140 Coating Non-Corrosive 90ml\u003c\/h2\u003e\u003cbr\u003eDow DOWSIL 3140 RTV Coating Clear is a one component, room temperature curing, solvent free coating that is used for pin sealing, increased solder joint coverage, thin section encapsulation, and protecting sensitive components from corrosion. It is self leveling, flowable, and flame resistant. 90 mL Tube.\u003cbr\u003e\u003ch6\u003eFEATURES \u0026amp; BENEFITS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eGood flowability\u003c\/li\u003e \u003cli\u003eRoom temperature cure\u003c\/li\u003e \u003cli\u003eNo added solvents\u003c\/li\u003e \u003cli\u003eUL 94 V-1, IPC-CC-830 and MIL-A-46146 tested\u003c\/li\u003e \u003cli\u003eNo mixing required\u003c\/li\u003e \u003cli\u003eRoom temperature cure, no ovens required\u003c\/li\u003e \u003cli\u003eFaster in-line processing with optional heat acceleration\u003c\/li\u003e \u003cli\u003eAble to flow, fill or self-leveling after dispensing\u003c\/li\u003e \u003cli\u003eCan be considered for uses requiring added flame resistance, IPC or Mil Spec testing\u003c\/li\u003e \u003cli\u003eUV indicator for manual and automated inspection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6 class=\"md-block-header-two\"\u003eAPPLICATIONS\u003c\/h6\u003e\u003cbr\u003eDOWSIL™ 3140 RTV Coating is suitable for:\u003cul\u003e \u003cli\u003eProtection of corrosion-sensitive components\u003c\/li\u003e \u003cli\u003eProtection of rigid and flexible circuit boards\u003c\/li\u003e \u003cli\u003eImproved pin\/solder joint coverage\u003c\/li\u003e \u003cli\u003eThin-section encapsulation\u003c\/li\u003e \u003cli\u003ePin sealing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eUsable Life And Storage\u003c\/h6\u003e\u003cbr\u003eFor best results, Dow adhesives should be stored at or below the storage temperature listed\u003cbr\u003eon the product label. Special precautions must be taken to prevent moisture from contacting\u003cbr\u003ethese materials. Containers should be kept tightly closed with head or air space minimized.\u003cbr\u003ePartially filled containers should be purged with dry air or other gases, such as nitrogen. The\u003cbr\u003eproduct should be stored in its original packaging with the cover tightly attached to avoid\u003cbr\u003eany contamination. Store in accordance with any special instructions listed on the product\u003cbr\u003elabel. The product should be used by its Use Before date as indicated on the product label\u003cbr\u003e\u003ch6\u003ePreparing Surfaces\u003c\/h6\u003e\u003cbr\u003eAll surfaces should be thoroughly cleaned and\/or degreased with Dow OS fluids, naphtha,\u003cbr\u003emineral spirits, methyl ethyl ketone (MEK) or other suitable solvent. Solvents such as\u003cbr\u003eacetone or isopropyl alcohol (IPA) do not tend to remove oils well, and any oils remaining on\u003cbr\u003ethe surface may interfere with adhesion. Light surface abrasion is recommended whenever\u003cbr\u003epossible, because it promotes good cleaning and increases the surface area for bonding. A\u003cbr\u003efinal surface wipe with acetone or IPA is also useful. Some cleaning techniques may provide\u003cbr\u003ebetter results than others; users should determine the best techniques for their particular\u003cbr\u003eapplications.\u003cbr\u003e\u003ch6\u003eSubstrate Testing\u003c\/h6\u003e\u003cbr\u003eDue to the wide variety of substrate types and differences in substrate surface conditions,\u003cbr\u003egeneral statements on adhesion and bond strength are impossible. To ensure maximum\u003cbr\u003ebond strength on a particular substrate, cohesive failure of the product in a lap shear or\u003cbr\u003esimilar test is needed to ensure compatibility of the adhesive with the substrate being\u003cbr\u003econsidered. Also, this test can be used to determine minimum cure time or to detect the\u003cbr\u003epresence of surface contaminants such as mold release agents, oils, greases and oxide\u003cbr\u003efilms.\u003cbr\u003e\u003ch6\u003eAdhesion\u003c\/h6\u003e\u003cbr\u003eDow adhesives are specially formulated to provide unprimed adhesion to many reactive\u003cbr\u003emetals, ceramics and glass, as well as to selected laminates, resins and plastics. However,\u003cbr\u003egood adhesion cannot be expected on non-reactive metal substrates or non-reactive plastic\u003cbr\u003esurfaces such as Teflon, polyethylene or polypropylene. Special surface treatments such as\u003cbr\u003echemical etching or plasma treatment can sometimes provide a reactive surface and\u003cbr\u003epromote adhesion to these types of substrates Dow primers can be used to increase the\u003cbr\u003echemical activity on difficult substrates. Poor adhesion may be experienced on plastic or\u003cbr\u003erubber substrates that are highly plasticized, because the mobile plasticizers act as release\u003cbr\u003eagents. Small-scale laboratory evaluation of all substrates is recommended before\u003cbr\u003eproduction trials are made\u003cbr\u003e\u003ch6\u003eUseful Temperature Ranges\u003c\/h6\u003e\u003cbr\u003eFor most uses, silicone adhesives should be operational over a temperature range of -45 to\u003cbr\u003e200°C (-49 to 392°F) for long periods of time. However, at both the low and high\u003cbr\u003etemperature ends of the spectrum, behavior of the materials and performance in particular\u003cbr\u003eapplications can become more complex and require additional considerations. For lowtemperature performance, thermal cycling to conditions such as -55°C (-67°F) may be\u003cbr\u003epossible, but performance should be verified for your parts or assemblies. Factors that may\u003cbr\u003einfluence performance are configuration and stress sensitivity of components, cooling rates\u003cbr\u003eand hold times, and prior temperature history. At the high-temperature end, the durability of\u003cbr\u003ethe cured silicone elastomer is time and temperature dependent. As expected, the higher\u003cbr\u003ethe temperature, the shorter the time the material will remain useable.\u003cbr\u003e\u003ch6\u003eSolvent Exposure\u003c\/h6\u003e\u003cbr\u003eThe silicone adhesive discussed in this literature is intended only to survive splash or\u003cbr\u003eintermittent exposures. It is not suited for continuous solvent or fuel exposure. Testing\u003cbr\u003eshould be done to confirm performance of the adhesives under these conditions.\u003cbr\u003e\u003ch6\u003eHandling Precautions\u003c\/h6\u003e\u003cbr\u003ePRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN\u003cbr\u003eTHIS DOCUMENT. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS\u003cbr\u003eAND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD\u003cbr\u003eINFORMATION. THE SAFETY DATA SHEET IS AVAILABLE ON THE DOW WEBSITE AT\u003cbr\u003eWWW.CONSUMER.DOW.COM, OR FROM YOUR DOW SALES APPLICATION\u003cbr\u003eENGINEER, OR DISTRIBUTOR, OR BY CALLING DOW CUSTOMER SERVICE.\u003cbr\u003e\u003ch6\u003eHealth And Environmental\u003cbr\u003eInformation\u003c\/h6\u003e\u003cbr\u003eTo support customers in their product safety needs, Dow has an extensive Product\u003cbr\u003eStewardship organization and a team of product safety and regulatory compliance specialists\u003cbr\u003eavailable in each area. For further information, please see our website, www.consumer.dow.com or consult your\u003cbr\u003elocal Dow representative.\u003cbr\u003e \u003cbr\u003e \u003cbr\u003e \u003cbr\u003e \u003cbr\u003e \u003cbr\u003e \u003cbr\u003e ","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552976331041,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/unnamed.jpg?v=1687490786"},{"product_id":"threebond-1102-yellow-liquid-gasket","title":"Threebond 1102 Yellow Liquid Gasket","description":"\u003ch2\u003eThreebond 1102 Yellow Liquid Gasket\u003c\/h2\u003e\u003cbr\u003eThree Bond 1102 is a high viscosity, yellow-colour, and non-drying liquid gasket. It can completely fill all\u003cbr\u003eimperfection on surfaces to be sealed, thus keeps it air-and water-tight. It has excellent resistance to oil.\u003cbr\u003eBecause of its non-drying liquid form, joints can be easily dismantled and cleaned.\u003cbr\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eNon-drying type having strong adhesion. By forming a thin layer, it prevents leakage from metal\u003cbr\u003esurfaces without adhesive.\u003c\/li\u003e \u003cli\u003eAlso effective in preventing leakage from threaded fasteners.\u003c\/li\u003e \u003cli\u003eApply with brush, oiler or Three Bond Flow Gun.\u003c\/li\u003e \u003cli\u003eTightens joints 2-4 minutes after application.\u003c\/li\u003e \u003cli\u003eKeeps container air-tight when not used.\u003c\/li\u003e \u003cli\u003eFlammable before curing. Keep away from fire.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eChemical Test\u003c\/h6\u003e\u003cbr\u003eTests were made in accordance to specifications of JIS-K-6820. A glass panel with a recess filled with a\u003cbr\u003ecoat of fluid sealant was air-dried for 24 hours, then baked at 100°C±5°C for 3 hours. Then the test piece\u003cbr\u003ewas placed in a desiccator and allowed to cool to room temperature. Thereafter, the test piece was\u003cbr\u003eweighed and the following tests were applied.\u003cbr\u003e\u003ch6\u003eWater Resistance\u003c\/h6\u003e\u003cbr\u003eThe test piece was immersed in 90-95°C water using distillation device with a recycle tower attached. It\u003cbr\u003ewas then washed with methyl alcohol and dried at 65 ±5°C for 24 hours, and thereafter cooled to room\u003cbr\u003etemperature. The test piece was checked for change in weight.\u003cbr\u003e\u003ch6\u003eOil Resistance\u003c\/h6\u003e\u003cbr\u003eThe test piece was immersed in 95-100°C rubber lubricant No. 2 for 24 hours and subjected to the same\u003cbr\u003etesting procedures as described in Section (1).\u003cbr\u003e\u003ch6\u003eGasoline Resistance\u003c\/h6\u003e\u003cbr\u003eThe test piece was immersed in 45-50°C automobile gasoline No. 1 for 24 hours, and then the test\u003cbr\u003eprocessed in the same manner as outlined above.\u003cbr\u003e\u003ch5\u003ePhysical Test\u003c\/h5\u003e\u003cbr\u003e\u003ch6\u003ePressure Resistance\u003c\/h6\u003e\u003cbr\u003eThe same apparatus was employed as those used in Pressure Resistance Test. The specimen was\u003cbr\u003eapplied onto the joint surfaces, which were tightened using the same torque as in the Pressure\u003cbr\u003eResistance Test. The flanges were cooled to -40 ±5°C for 2 hours and baked at 100 ±5°C for 3 hours.\u003cbr\u003eThereafter they were cooled down to room temperature.\u003cbr\u003e\u003ch6\u003eCorrosiveness\u003c\/h6\u003e\u003cbr\u003eThe sample was coated over the entire polished surface of copper plate, about 25 mm square and 3 mm\u003cbr\u003ethick of about 3 mm, then left at room temperature for 24 hours. Remove the sample from the surface of\u003cbr\u003ethe plate with suitable solvent for checking on occurrence of pitching or etching.\u003cbr\u003e\u003ch6\u003eHandling Precautions\u003c\/h6\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eThis product is inflammable; please take precautions in storage and handling (refer to MSDS).\u003c\/li\u003e \u003cli\u003eIf using a large amount of this product or using for a long time, it is compulsory to ventilate the\u003cbr\u003earea well. If necessary, use mask, non-permeable gloves, protective glasses, ventilate well with\u003cbr\u003elocal exhaust equipment.\u003c\/li\u003e \u003cli\u003eDo not inhale or ingest. In the event that this product is ingested, immediately consult physician.\u003c\/li\u003e \u003cli\u003eProduct may settle upon storage, stir well until uniform before using.\u003c\/li\u003e \u003cli\u003eAfter use, close the lid tightly, then store. Do not return unused portion, if transferred, to original\u003cbr\u003econtainer.\u003c\/li\u003e \u003cli\u003eBefore use, clean the bonding area to remove grease or dust.\u003c\/li\u003e \u003cli\u003eApply with brush, oiler or Three Bond Flow Gun.\u003c\/li\u003e \u003cli\u003eTighten joints 2-4 minutes after application.\u003c\/li\u003e \u003cli\u003eKeep away from children.\u003c\/li\u003e \u003cli\u003eFor industrial use only.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eDisclaimer\u003c\/h6\u003e\u003cbr\u003eFor Industrial Use Only (Do not use for household purposes)\u003cul\u003e \u003cli\u003eThe data contained in this report are obtained from experimental results, based on our test\u003cbr\u003emethods. We cannot assume absolute responsibility for accuracy and safety. Before using this\u003cbr\u003eproduct, use your own judgement to determine whether or not this product meets the requirements\u003cbr\u003eof the application and objectives. This includes the burden of responsibility and hazardous\u003cbr\u003edanger. The extent of the guarantee provides replacement for products, which are clearly\u003cbr\u003eunsatisfactory.\u003c\/li\u003e \u003cli\u003eWe assume responsibility for neither injury nor property damages resulting from the misuse of this\u003cbr\u003eproduct.\u003c\/li\u003e \u003cli\u003eWe do not assume responsibility without written notice or contract.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552980295969,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/threebond-non-drying-liquid-gasket-tb1102-fsot_600.jpg?v=1687490820"},{"product_id":"threebond-1212-silicone-white-liquid-gasket","title":"Threebond 1212 Silicone White Liquid Gasket","description":"\u003ch2\u003eThreebond 1212 Silicone White Liquid Gasket\u003c\/h2\u003e\u003cbr\u003eThree Bond TB1212 is a white single-component, solvent free and non-acid RTV-Silicone (Room Temperature Vulcanising) rubber. An oxime neutral cure type, TB1212 can be used for general sealing as well as for electrical insulation. It presents no offensive odour during curing, and will not corrode metal (corrosion of copper based metals may occur when hermetically sealed). In addition TB1212 adheres well on alkali materials such as mortar and cement. TB 1212 has outstanding mechanical resistance against shear forces, with excellent adhesion even to slightly polluted surfaces. It is extremely fast curing with no shrinkage and no generation of corrosive gases. It permits normal disassembly.\u003cbr\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eEffective temperature range -60°C to +250°C.\u003c\/li\u003e \u003cli\u003eOutstanding mechanical resistance against vibration.\u003c\/li\u003e \u003cli\u003eExcellent adhesion even to slightly oily surfaces.\u003c\/li\u003e \u003cli\u003eResistive for engine oil.\u003c\/li\u003e \u003cli\u003eSensor safe.\u003c\/li\u003e \u003cli\u003eNormal disassembly\u003c\/li\u003e\n\u003c\/ul\u003eTB1212 is a non-flowing single-component, solvent free and non-acid RTV (room temperature vulcanizing) silicone\u003cbr\u003eliquid gasket. TB1212 is ideal for places where a long, faultless seal is absolutely critical. Recommended for sealing\u003cbr\u003eflange surfaces, screw sections and as a gasket dressing, to prevent oil, water, gasoline and chemical leaks. Long\u003cbr\u003etack-free time and fully cured in 24 hours. Recommended for multi-purpose bonding and sealing.\u003cbr\u003e\u003ch6\u003eDirections for Use\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eIn order to fully utilise the performance of the liquid gasket, it is recommended to eliminate oil, dirt and any\u003cbr\u003eprevious gasket material from the work. Oil and grease can be effectively removed by cleaning with TB6602W\u003cbr\u003eSuper Cleaner.\u003c\/li\u003e \u003cli\u003eTB1212 may be applied directly from the tube.\u003c\/li\u003e \u003cli\u003eCut nozzle to desired bead size, 3mm is suitable for most applications.\u003c\/li\u003e \u003cli\u003eApply a uniform continuous bead to the sealing flange and assemble the parts immediately or within 5 minutes\u003cbr\u003ewhilst silicone is still wet. Tighten bolts to specified torque – no need to re-torque later.\u003c\/li\u003e \u003cli\u003eFor gasket dressing apply a thin film to flange, place solid gasket and apply a second film of TB1212 on top\u003cbr\u003esurface.\u003c\/li\u003e \u003cli\u003eAssemble parts immediately or within 5 minutes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eHandling precautions\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eTB1212 liquid gasket has been proven to be safe to handle as long as normal hygienic practices are observed.\u003c\/li\u003e \u003cli\u003eAvoid breathing fumes and repeated or prolonged skin contact.\u003c\/li\u003e \u003cli\u003eContact with skin in such conditions should be avoided by using gloves or barrier creams.\u003c\/li\u003e \u003cli\u003eRefer to the product MSDS for further details.\u003c\/li\u003e \u003cli\u003eUse and keep out of reach of children.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eStorage\u003c\/h6\u003e\u003cbr\u003eKeep the container tightly sealed and store in a dry cool place avoiding direct sunlight.\u003cbr\u003e\u003ch6\u003eDescription of first aid measures\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eAfter inhalation : Supply fresh air. If required, provide artificial respiration. Keep\u003cbr\u003epatient warm. Consult doctor if symptoms persist.\u003cbr\u003eIn case of unconsciousness place patient stably in side position\u003cbr\u003efor transportation.\u003c\/li\u003e \u003cli\u003eAfter skin contact : Immediately wash with water and soap and rinse thoroughly.\u003cbr\u003eIf skin irritation continues, consult a doctor.\u003c\/li\u003e \u003cli\u003eAfter eye contact : Rinse opened eye for several minutes under running water. Then\u003cbr\u003econsult a doctor.\u003c\/li\u003e \u003cli\u003eAfter swallowing : Do not induce vomiting; call for medical help immediately.\u003cbr\u003eA person vomiting while lying on their back should be turned onto\u003cbr\u003etheir side.\u003cbr\u003eInduce vomiting, only if affected person is fully conscious.\u003c\/li\u003e\n\u003c\/ul\u003e ","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552980361505,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/threebond-solventless-silicone-liquid-gasket-100g-tb1212-k53c_600.png?v=1687490824"},{"product_id":"threebond-1521-synthetic-rubber-adhesive","title":"Threebond 1521 Synthetic Rubber Adhesive","description":"\u003ch2\u003eThreebond 1521 Synthetic Rubber Adhesive\u003c\/h2\u003e\u003cbr\u003e\u003cdiv class=\"pOne\"\u003eThreeBond\u003cspan class=\"sup\"\u003e®\u003c\/span\u003e Synthetic Rubber Adhesive 1521 is a multi-purpose, rubber based adhesive.\u003cbr\u003eBonds rubber, plastic, vinyl, metal, leather, and grips\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003eIt is suitable for bonding a wide range of substrates including metals, rubbers and plastics, giving a high initial bond strength after setting. TB1521 is widely used as a contact adhesive in various applications such as bonding automotive sound insulating materials, carpets, plastic and interior trim, decorative laminates and so on.\u003cbr\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cbr\u003eMaterials which can be bonded:\u003cul\u003e \u003cli\u003eMetals (Iron, Aluminium, Duraluminium, Brass, etc.)\u003c\/li\u003e \u003cli\u003ePlastics (Polyvinylchloride, Polymethacrylic, Phenolic resin,\u003cbr\u003ePolystyrene, Ebonite, etc.)\u003c\/li\u003e \u003cli\u003eNon-metals (Wood, fabrics, leather, ceramics, paper,\u003cbr\u003econcrete, mortar, etc.)\u003c\/li\u003e \u003cli\u003eNatural and synthetic rubbers (CR,SBR, EPDM, NBR, etc.)\u003cbr\u003e(Note: The product is not suitable for bonding Polyethylene,\u003cbr\u003ePolypropylene and Fluororesin.)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eDirections for Use\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eSurfaces must be clean, dry and free from oil or greasy\u003cbr\u003edeposits.\u003c\/li\u003e \u003cli\u003eStir well before use. After long term storage a precipitated\u003cbr\u003elayer may form but this does not mean the cement is no\u003cbr\u003elonger usable.\u003c\/li\u003e \u003cli\u003eApply a thin even coat to one or both surfaces by brush,\u003cbr\u003eknife, or other spreading method. Coating both surfaces is\u003cbr\u003epreferred since it improves bond strength and permits longer\u003cbr\u003eopen time.\u003c\/li\u003e \u003cli\u003eCoverage is approximately 3m²\/kg for a dry film thickness of\u003cbr\u003e0.1mm.\u003c\/li\u003e \u003cli\u003eAbsorbant surfaces may require more than one coat. Bond\u003cbr\u003ewhilst adhesive is still wet or aggresively tacky.\u003c\/li\u003e \u003cli\u003eFor non-porous surfaces allow the adhesive to dry until it is\u003cbr\u003etacky. Join the surfaces with firm pressure.\u003c\/li\u003e \u003cli\u003eOpen time for one surface application is 5 minutes or 30\u003cbr\u003eminutes for two surfaces application. This drying time\u003cbr\u003edepends on temperature, humidity, and the porosity of the\u003cbr\u003ematerials to be bonded.\u003c\/li\u003e \u003cli\u003eReactivation bonding method:\u003cbr\u003eRe-moistening method: Allow the surfaces to dry\u003cbr\u003ecompletely. After the solvent has completely evaporated\u003cbr\u003eapply a small amount of adhesive to give renewed tackiness\u003cbr\u003eand bond in the normal manner. This method gives greater\u003cbr\u003eimmediate strength.\u003cbr\u003eHeat reactivation method: Allow the surfaces to dry\u003cbr\u003ecompletely. Join the surfaces and heat in an oven, press or\u003cbr\u003eunder lamps at 120°C, maintaining adequate pressure to\u003cbr\u003eensure intimate contact of the surfaces, whilst allowing\u003cbr\u003esufficient time for the transfer of heat through mating parts to\u003cbr\u003ethe adhesive film. Surfaces may be pre-coated in this way\u003cbr\u003eseveral days before final reactivation.\u003c\/li\u003e \u003cli\u003eTB 1521 is highly flammable.\u003cbr\u003eUse only in well ventilated areas.\u003cbr\u003eStore in a cool, dark place in its original container tightly\u003cbr\u003esealed to maintain shelf life.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003ePackaging\u003c\/h6\u003e\u003cbr\u003e150 ml tube and 1kg, 15kg and 160 kg containers (special\u003cbr\u003epacking on request).\u003cbr\u003e\u003ch6\u003eDescription of first aid measures\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eAfter inhalation : Supply fresh air. If required, provide artificial respiration. Keep\u003cbr\u003epatient warm. Consult doctor if symptoms persist.\u003cbr\u003eIn case of unconsciousness place patient stably in side position\u003cbr\u003efor transportation.\u003c\/li\u003e \u003cli\u003eAfter skin contact : Immediately wash with water and soap and rinse thoroughly.\u003cbr\u003eIf skin irritation continues, consult a doctor.\u003c\/li\u003e \u003cli\u003eAfter eye contact : Rinse opened eye for several minutes under running water. Then\u003cbr\u003econsult a doctor.\u003c\/li\u003e \u003cli\u003eAfter swallowing : Do not induce vomiting; call for medical help immediately.\u003cbr\u003eA person vomiting while lying on their back should be turned onto\u003cbr\u003etheir side.\u003cbr\u003eInduce vomiting, only if affected person is fully conscious.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e ","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552980427041,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/tbsi19068-001.jpg?v=1687490828"},{"product_id":"permatex-80050-clear-rtv-silicone-adhesive-sealant-3oz","title":"Permatex 80050 Clear RTV Silicone Adhesive Sealant 3oz","description":"\u003ch2\u003ePermatex 80050 Clear Rtv Silicone Adhesive Sealant 3oz\u003c\/h2\u003e\u003cbr\u003ePermatex Clear Silicone Adhesive Sealant is a general purpose, single component, room temperature vulcanizing (RTV) compound, designed for the sealing of mechanical assemblies. Upon curing from the exposure to moisture in the air, this non-sagging paste forms a tough, flexible, waterproof seal of silicone rubber, which resists aging, weathering and thermal cycling without hardening, shrinking or cracking.\u003cbr\u003e\u003ch6\u003ePRODUCT BENEFITS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eEasy application\u003c\/li\u003e \u003cli\u003eApplied to horizontal or vertical surfaces\u003c\/li\u003e \u003cli\u003eSuperior adhesion and flexibility\u003c\/li\u003e \u003cli\u003eWaterproofs\u003c\/li\u003e \u003cli\u003eInsulates\u003c\/li\u003e \u003cli\u003eUnaffected by vibration\u003c\/li\u003e \u003cli\u003eNon-flammable\u003c\/li\u003e \u003cli\u003eNon-toxic\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eTYPICAL APPLICATIONS\u003c\/h6\u003e\u003cbr\u003ePermatex Clear Silicone Adhesive Sealant is an excellent all-purpose adhesive\/sealant for the following materials:\u003cul\u003e \u003cli\u003eMetal\u003c\/li\u003e \u003cli\u003eGlass\u003c\/li\u003e \u003cli\u003eWood\u003c\/li\u003e \u003cli\u003ePlastic\u003c\/li\u003e \u003cli\u003eSilicone resin\u003c\/li\u003e \u003cli\u003eVulcanized silicone rubber\u003c\/li\u003e \u003cli\u003eCeramics\u003c\/li\u003e \u003cli\u003eNatural and synthetic fibers\u003c\/li\u003e \u003cli\u003ePainted surfaces\u003c\/li\u003e\n\u003c\/ul\u003eBonds, seals, repairs, mends and secures:\u003cul\u003e \u003cli\u003eLens housings\u003c\/li\u003e \u003cli\u003eWindshields (not for installation)\u003c\/li\u003e \u003cli\u003eWindows\u003c\/li\u003e \u003cli\u003eDoor frames\u003c\/li\u003e \u003cli\u003eVinyl tops\u003c\/li\u003e \u003cli\u003eHousings and covers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eDIRECTIONS FOR USE\u003c\/h6\u003e\u003cbr\u003e\u003cstrong\u003eFor Assembly\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eRemove all previous material from mating surfaces. Permatex Gasket Remover is recommended for most materials, not for plastics or painted surfaces.\u003c\/li\u003e \u003cli\u003eFor best results, clean and dry all surfaces with a residue-free solvent, such as Permatex Brake and Parts Cleaner.\u003c\/li\u003e \u003cli\u003eCut nozzle to desired bead size, 1\/16“ to 1\/4“ in diameter. A 1\/8” bead is usually sufficient for most applications.\u003c\/li\u003e \u003cli\u003eRemove cap, puncture tube or cartridge seal and attach extension nozzle.\u003c\/li\u003e \u003cli\u003eApply a continuous and even bead of silicone to one surface.\u003c\/li\u003e \u003cli\u003eAssemble parts immediately while silicone is still wet. Secure or tighten as required, avoiding excessive squeeze-out.\u003c\/li\u003e \u003cli\u003ePressure should be applied to parts for 24 hours until the silicone is fully cured.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003cstrong\u003eInstructions for PowerBead\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eClean and dry all flange surfaces to be sealed.\u003c\/li\u003e \u003cli\u003eRemove black cap from top of extension nozzle.\u003c\/li\u003e \u003cli\u003eTurn nozzle extension one complete turn (360) counterclockwise.\u003c\/li\u003e \u003cli\u003eDepress finger trigger and apply a continuous 1\/16 inch to 1\/8 inch PowerBead to one surface.\u003c\/li\u003e \u003cli\u003eApply a continuous and even bead of silicone to one surface.\u003c\/li\u003e \u003cli\u003eAssemble parts immediately while silicone is still wet. Secure or tighten as required, avoiding excessive squeeze-out.\u003c\/li\u003e \u003cli\u003ePressure should be applied to parts for 24 hours until the silicone is fully cured.\u003c\/li\u003e \u003cli\u003eTo close, turn extension nozzle clockwise until tight (about one full turn). Wipe off excess material from nozzle and replace black cap.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003cstrong\u003eStorage of Unused Product\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eCreate a “Silicone Plug” by allowing excess material to extend beyond the extension nozzle or aerosol tip to cure, sealing and protecting the remaining product from moisture. For reuse, simply remove the cured product from the tip.\u003c\/li\u003e \u003cli\u003eFor PowerBead dispensers, you may store remaining product using either the above “silicone plug” method or using the included plastic cap.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003cstrong\u003eFor Cleanup\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eRemove uncured product from parts and hand-tools with Permatex® Brake and Parts Cleaner. If skinned over, break film with a dry cloth to remove as much as possible. Remove the remaining material with Permatex® Gasket Remover.\u003c\/li\u003e \u003cli\u003eClean hands with a dry cloth or Permatex Fast Orange hand cleaner.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eTYPICAL CURING PERFORMANCE\u003c\/h6\u003e\u003cbr\u003ePermatex Clear RTV Silicone Adhesive Sealant cures on exposure to moisture in the air. The product cures tack free in 1 hour and fully cures in 24 hours. Cure times will vary with temperature, humidity and gap. Note: The curing process can cause corrosion to some surfaces, for critical applications use the Ultra Series silicones.\u003cbr\u003e\u003ch6\u003eGENERAL INFORMATION\u003c\/h6\u003e\u003cbr\u003eThis product is not recommended for use in pure oxygen\u003cbr\u003eand\/or oxygen rich systems and should not be selected as\u003cbr\u003ea sealant for chlorine or other strong oxidizing materials.\u003cbr\u003eFor safe handling information on this product, consult the\u003cbr\u003eMaterial Safety Data Sheet, (MSDS).\u003cbr\u003e\u003ch6\u003eSTORAGE\u003c\/h6\u003e\u003cbr\u003eProducts shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8 to 28C (46 to 82F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range. To prevent contamination of unused product, do not return any material to its original container.","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552981967137,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/Permatex-80050-Clear-Adhesive-Sealant-3.png?v=1687490876"},{"product_id":"permatex-80022-sensor-safe-blue-rtv-silicone-3oz","title":"Permatex 80022 Sensor-Safe Blue Rtv Silicone 3oz","description":"\u003ch2\u003ePermatex 80022 Sensor-Safe Blue Rtv Silicone Gasket Maker 3oz\u003c\/h2\u003e\u003cbr\u003ePermatex® Sensor-Safe Blue RTV Silicone Gasket is a single\u003cbr\u003ecomponent, room temperature vulcanizing gasketing\u003cbr\u003ecompound designed to provide reliable “formed-in-place”\u003cbr\u003egaskets for mechanical assemblies. This material cures on\u003cbr\u003eexposure to moisture in the air to form a tough, flexible,\u003cbr\u003esilicone rubber gasket. The product resists aging, weathering\u003cbr\u003eand thermal cycling without hardening, shrinking or cracking.\u003cbr\u003eThe original “Blue” gasketing product, refined and oxygen\u003cbr\u003esensor safe.\u003cbr\u003e\u003ch6\u003ePRODUCT BENEFITS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eSuperior adhesion and flexibility\u003c\/li\u003e \u003cli\u003eSensor safe\u003c\/li\u003e \u003cli\u003eReplaces most cut gaskets\u003c\/li\u003e \u003cli\u003eCan be used as a gasket maker or dressing\u003c\/li\u003e \u003cli\u003eEasy application\u003c\/li\u003e \u003cli\u003eNon-flammable, Non-toxic\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eTYPICAL APPLICATIONS\u003c\/h6\u003e\u003cbr\u003eGasket maker for flexible flanges. Use as a sealant to coat\u003cbr\u003eany pre cut gasket.\u003cbr\u003e\u003ch6\u003eDIRECTIONS FOR USE\u003c\/h6\u003e\u003cbr\u003e\u003cstrong\u003eFor assembly as a form-in-place gasket\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eRemove all previous material from mating surfaces.\u003cbr\u003ePermatex Gasket Remover is recommended for most\u003cbr\u003ematerials, not for plastics or painted surfaces.\u003c\/li\u003e \u003cli\u003eFor best results, clean and dry all surfaces with a\u003cbr\u003eresidue-free solvent, such as Permatex Brake and\u003cbr\u003eParts Cleaner.\u003c\/li\u003e \u003cli\u003eCut nozzle to desired bead size, 1\/16“ to 1\/4“ in\u003cbr\u003ediameter. A 1\/8” bead is usually sufficient for most\u003cbr\u003eapplications.\u003c\/li\u003e \u003cli\u003eRemove cap, puncture tube or cartridge seal and attach\u003cbr\u003eextension nozzle.\u003c\/li\u003e \u003cli\u003eApply a continuous and even bead of silicone to one\u003cbr\u003esurface, first tracing the internal areas of the gasket\u003cbr\u003econfiguration, then all surrounding bolt holes as shown\u003cbr\u003ebelow:\u003c\/li\u003e \u003cli\u003eAssemble parts immediately while silicone is still wet.\u003c\/li\u003e \u003cli\u003eFinger tighten flange only until material begins to seep\u003cbr\u003eout the sides of the flange.\u003c\/li\u003e \u003cli\u003eAllow to set for at least two hours and re-torque at lease\u003cbr\u003eone quarter to one half turn.\u003c\/li\u003e \u003cli\u003eFor best results, allow to cure overnight.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003cstrong\u003eFor assembly as a gasket dressing\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eRepeat steps 1 thru 4 as in previous section.\u003c\/li\u003e \u003cli\u003eApply a thin film of silicone to one surface to be sealed.\u003c\/li\u003e \u003cli\u003ePlace the pre-cut gasket onto silicone film.\u003c\/li\u003e \u003cli\u003eApply a second thin to pre-cut gasket surface.\u003c\/li\u003e \u003cli\u003eRemove any excess and assemble parts immediately.\u003cbr\u003eNote: Product not recommended for use as a cylinder\u003cbr\u003ehead gasket or head gasket sealant.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003cstrong\u003eInstructions for PowerBead\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eClean and dry all flange surfaces to be sealed.\u003c\/li\u003e \u003cli\u003eRemove black cap from top of extension nozzle.\u003c\/li\u003e \u003cli\u003eTurn nozzle extension one complete turn (360°)\u003cbr\u003ecounterclockwise.\u003c\/li\u003e \u003cli\u003eDepress finger trigger and apply a continuous 1\/16 inch\u003cbr\u003eto 1\/8 inch PowerBead to one surface.\u003c\/li\u003e \u003cli\u003eAssemble parts immediately while silicone is still wet.\u003c\/li\u003e \u003cli\u003eFinger tighten flange only until material begins to seep\u003cbr\u003eout the sides of the flange.\u003c\/li\u003e \u003cli\u003eAllow to set for at least two hours and re-torque at least\u003cbr\u003eone quarter to one half turn.\u003c\/li\u003e \u003cli\u003eFor best results, allow to cure overnight.\u003c\/li\u003e \u003cli\u003eTo close, turn extension nozzle clockwise until tight\u003cbr\u003e(about one full turn). Wipe off excess material from\u003cbr\u003enozzle and replace black cap.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003cstrong\u003eStorage of Unused Product\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eCreate a “Silicone Plug” by allowing excess material to\u003cbr\u003eextend beyond the extension nozzle or aerosol tip to\u003cbr\u003ecure, sealing and protecting the remaining product from\u003cbr\u003emoisture. For reuse, simply remove the cured product\u003cbr\u003efrom the tip.\u003c\/li\u003e \u003cli\u003eFor PowerBead dispensers, you may store remaining\u003cbr\u003eproduct using either the above “silicone plug” method or\u003cbr\u003eusing the included plastic cap.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003cstrong\u003eFor Cleanup\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eRemove uncured product from parts and hand-tools\u003cbr\u003ewith Permatex® Envirosafe® ODC Free\u003cbr\u003eCleaner\/Degreaser. If skinned over, break film with a\u003cbr\u003edry cloth to remove as much as possible. Remove the\u003cbr\u003eremaining material with Permatex® Gasket Remover.\u003c\/li\u003e \u003cli\u003eClean hands with a dry cloth or Permatex Fast\u003cbr\u003eOrange hand cleaner.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eTYPICAL CURING PERFORMANCE\u003c\/h6\u003e\u003cbr\u003ePermatex Sensor-Safe Blue RTV Silicone Gasket cures on\u003cbr\u003eexposure to moisture in the air. The product dries tack free in\u003cbr\u003eone hour and fully cures in 24 hours. Cure times will vary with\u003cbr\u003etemperature, humidity and gap. Note: The curing process can\u003cbr\u003ecause corrosion to some surfaces, for critical applications use\u003cbr\u003ethe Ultra Series silicones.\u003cbr\u003e\u003ch6\u003eChemical \/ Solvent Resistance\u003c\/h6\u003e\u003cbr\u003eThe product retains effective properties in contact with\u003cbr\u003eautomotive fluids, such as motor oil, transmission fluids,\u003cbr\u003ealcohol and antifreeze solutions. Note: Not recommended for\u003cbr\u003eparts in contact with gasoline.\u003cbr\u003e\u003ch6\u003eGENERAL INFORMATION\u003c\/h6\u003e\u003cbr\u003eThis product is not recommended for use in pure oxygen\u003cbr\u003eand\/or oxygen rich systems and should not be selected as\u003cbr\u003ea sealant for chlorine or other strong oxidizing materials.\u003cbr\u003eFor safe handling information on this product, consult the\u003cbr\u003eMaterial Safety Data Sheet, (MSDS).\u003cbr\u003e\u003ch6\u003eSTORAGE\u003c\/h6\u003e\u003cbr\u003eProducts shall be ideally stored in a cool, dry location in\u003cbr\u003eunopened containers at a temperature between 8_ to 28_C\u003cbr\u003e(46_ to 82_F) unless otherwise labeled. Optimal storage is at\u003cbr\u003ethe lower half of this temperature range. To prevent\u003cbr\u003econtamination of unused product, do not return any material to\u003cbr\u003eits original container.","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552982065441,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/81348RUI5nL._SL1500.jpg?v=1687490880"},{"product_id":"permatex-80057-super-300-form-a-gasket-sealant-4oz","title":"Permatex 80057 Super 300 Form-A-Gasket Sealant 4oz","description":"\u003ch2\u003ePermatex 80057 Super 300 Form-A-Gasket Sealant 4oz\u003c\/h2\u003e\u003cbr\u003ePermatex SUPER “300” FORM-A-GASKET Sealant is a\u003cbr\u003eblack, free flowing liquid with a characteristic alcoholic odor. It\u003cbr\u003eis an oleo-resinous, fast drying, non-hardening, semi-flexible\u003cbr\u003esealant for all types of assemblies with or without gaskets.\u003cbr\u003eRemains tacky after solvent evaporation.\u003cbr\u003e\u003ch6\u003ePRODUCT BENEFITS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eFor use on all types of gaskets\u003c\/li\u003e \u003cli\u003eNon-hardening\u003c\/li\u003e \u003cli\u003eSeals threads and hoses\u003c\/li\u003e \u003cli\u003eExcellent oil resistance\u003c\/li\u003e \u003cli\u003eApplies easily\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eTYPICAL APPLICATIONS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eCompressors\u003c\/li\u003e \u003cli\u003eDiesel engine heads\u003c\/li\u003e \u003cli\u003eFinal drives\u003c\/li\u003e \u003cli\u003eGear boxes\u003c\/li\u003e \u003cli\u003ePower units\u003c\/li\u003e \u003cli\u003ePumps Transmissions\u003c\/li\u003e \u003cli\u003eHigh speed turbine Superchargers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eDIRECTIONS FOR USE\u003c\/h6\u003e\u003cbr\u003e\u003cstrong\u003eFor assembly as a form-in-place gasket\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eRemove all previous material from mating surfaces.\u003cbr\u003ePermatex Gasket Remover is recommended for most\u003cbr\u003ematerials, not for plastics or painted surfaces.\u003c\/li\u003e \u003cli\u003eFor best results, clean and dry all surfaces with a\u003cbr\u003eresidue-free solvent, such as Permatex Brake and\u003cbr\u003eParts Cleaner.\u003c\/li\u003e \u003cli\u003eApply a thin, continuous and even bead of product to\u003cbr\u003eboth surfaces to be sealed. First tracing the internal\u003cbr\u003eareas of the gasket configuration, then all surrounding\u003cbr\u003ebolt holes as shown below:\u003c\/li\u003e \u003cli\u003eAllow to air dry for 5 to 10 minutes.\u003c\/li\u003e \u003cli\u003eAssemble parts immediately while the product is still\u003cbr\u003ewet. Secure or tighten to recommended torque specs.\u003cbr\u003eAllow 1 hour at room temperature before use.\u003cbr\u003eNote: Slight warming decreases drying time.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003cstrong\u003eFor Cleanup\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eRemove uncured product from parts and hand-tools with\u003cbr\u003ea dry cloth, if skinned over, break film with a dry cloth to\u003cbr\u003eremove as much as possible, and remove the remaining\u003cbr\u003ematerial with Permatex Gasket Remover as previously\u003cbr\u003estated.\u003c\/li\u003e \u003cli\u003eClean hands with a dry cloth or Permatex Fast\u003cbr\u003eOrange hand cleaner.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eGENERAL INFORMATION\u003c\/h6\u003e\u003cbr\u003eThis product is not recommended for use in pure oxygen\u003cbr\u003eand\/or oxygen rich systems and should not be selected as\u003cbr\u003ea sealant for chlorine or other strong oxidizing materials.\u003cbr\u003eFor safe handling information on this product, consult the\u003cbr\u003eMaterial Safety Data Sheet, (MSDS).\u003cbr\u003e\u003ch6\u003eSTORAGE\u003c\/h6\u003e\u003cbr\u003eProducts shall be ideally stored in a cool, dry location in\u003cbr\u003eunopened containers at a temperature between 8_ to 28_C\u003cbr\u003e(46_ to 82_F) unless otherwise labeled. Optimal storage is at\u003cbr\u003ethe lower half of this temperature range. To prevent\u003cbr\u003econtamination of unused product, do not return any material to\u003cbr\u003eits original container.","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552982229281,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/permatex-6br-sensor-safe-blue-rtv-silicone-gasket-maker-80022-oo50_600.png?v=1687490883"},{"product_id":"permatex-80062-high-tack-gasket-sealant-4oz","title":"Permatex 80062 High Tack Gasket Sealant 4OZ","description":"\u003ch2\u003ePermatex 80062 High Tack Gasket Sealant 4OZ\u003c\/h2\u003e\u003cbr\u003ePermatex High Tack Gasket Sealant is a yellow colored viscous liquid with a characteristic solvent odor that is a blend of elastomers and resins that is brushable and dries quickly to a highly tacky film.\u003cbr\u003eIt is designed to seal or bond rubber, cork, felt, paper and metal gaskets. It seals threaded hose connections, waterproofs and protects electrical terminals and wiring\u003cbr\u003e\u003ch6\u003ePRODUCT BENEFITS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eApplies easily\u003c\/li\u003e \u003cli\u003eFast drying\u003c\/li\u003e \u003cli\u003ePrevents seizing\u003c\/li\u003e \u003cli\u003eAssures correct gasket alignment\u003c\/li\u003e \u003cli\u003eColor coded for uniform application\u003c\/li\u003e \u003cli\u003eAllows easily disassembly\u003c\/li\u003e \u003cli\u003eResists most automotive and industrial fluids\u003c\/li\u003e \u003cli\u003eTemperature Range - 65ºF to +500ºF\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eTYPICAL APPLICATIONS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eGaskets\u003c\/li\u003e \u003cli\u003eThreaded connections\u003c\/li\u003e \u003cli\u003eHose connections\u003c\/li\u003e \u003cli\u003eWeatherstripping\u003c\/li\u003e \u003cli\u003eWaterproofing for electrical terminals, spark plugs and\u003cbr\u003ewires\u003c\/li\u003e \u003cli\u003eRear axle assembly\u003c\/li\u003e \u003cli\u003eTubeless tire beads\u003c\/li\u003e \u003cli\u003eDifferential assemblies\u003c\/li\u003e \u003cli\u003eFilter line connections\u003c\/li\u003e \u003cli\u003eTerminal protector\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eDIRECTIONS FOR USE\u003c\/h6\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eClean surfaces to remove all dirt, oil, rust, paints and\u003cbr\u003edried sealants. Keep surfaces dry and free from mold\u003cbr\u003erelease agents\u003c\/li\u003e \u003cli\u003eUsing brush, apply a thin, even coat on both surfaces to\u003cbr\u003ebe assembled.\u003c\/li\u003e \u003cli\u003eAllow to set until solvent has evaporated and film is dry.\u003c\/li\u003e \u003cli\u003eAssemble parts. Precoat gaskets or bolts for\u003cbr\u003econvenience in assembling.\u003c\/li\u003e \u003cli\u003eRemove with lacquer thinner.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eGENERAL INFORMATION\u003c\/h6\u003e\u003cbr\u003eThis product is not recommended for use in pure oxygen\u003cbr\u003eand\/or oxygen rich systems and should not be selected as\u003cbr\u003ea sealant for chlorine or other strong oxidizing materials.\u003cbr\u003eFor safe handling information on this product, consult the\u003cbr\u003eMaterial Safety Data Sheet, (MSDS).\u003cbr\u003e\u003ch6\u003eSTORAGE\u003c\/h6\u003e\u003cbr\u003eProducts shall be ideally stored in a cool, dry location in\u003cbr\u003eunopened containers at a temperature between 8_ to 28_C\u003cbr\u003e(46_ to 82_F) unless otherwise labeled. Optimal storage is at\u003cbr\u003ethe lower half of this temperature range. To prevent\u003cbr\u003econtamination of unused product, do not return any material to\u003cbr\u003eits original container.","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552984064289,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/81XRQ2I8zuL._AC_SY355.jpg?v=1687490907"},{"product_id":"permatex-80063-high-tack-gasket-sealant-16oz","title":"Permatex 80063 High Tack Gasket Sealant 16oz","description":"\u003ch2\u003ePermatex 80063 High Tack Gasket Sealant 16oz\u003c\/h2\u003e\u003cbr\u003ePermatex High Tack Gasket Sealant is a yellow-colored viscous liquid with a characteristic solvent odor that is a blend of elastomers and resins that is brushable and dries quickly to a highly tacky film.\u003cbr\u003eIt is designed to seal or bond rubber, cork, felt, paper and metal gaskets. It seals the threaded hose connections, waterproofs and protects electrical terminals and wiring\u003cbr\u003e\u003ch6\u003ePRODUCT BENEFITS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eApplies easily\u003c\/li\u003e \u003cli\u003eFast drying\u003c\/li\u003e \u003cli\u003ePrevents seizing\u003c\/li\u003e \u003cli\u003eAssures correct gasket alignment\u003c\/li\u003e \u003cli\u003eColor coded for uniform application\u003c\/li\u003e \u003cli\u003eAllows easily disassembly\u003c\/li\u003e \u003cli\u003eResists most automotive and industrial fluids\u003c\/li\u003e \u003cli\u003eTemperature Range - 65ºF to +500ºF\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eTYPICAL APPLICATIONS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eGaskets\u003c\/li\u003e \u003cli\u003eThreaded connections\u003c\/li\u003e \u003cli\u003eHose connections\u003c\/li\u003e \u003cli\u003eWeatherstripping\u003c\/li\u003e \u003cli\u003eWaterproofing for electrical terminals, spark plugs and\u003cbr\u003ewires\u003c\/li\u003e \u003cli\u003eRear axle assembly\u003c\/li\u003e \u003cli\u003eTubeless tire beads\u003c\/li\u003e \u003cli\u003eDifferential assemblies\u003c\/li\u003e \u003cli\u003eFilter line connections\u003c\/li\u003e \u003cli\u003eTerminal protector\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eDIRECTIONS FOR USE\u003c\/h6\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eClean surfaces to remove all dirt, oil, rust, paints and\u003cbr\u003edried sealants. Keep surfaces dry and free from mold\u003cbr\u003erelease agents\u003c\/li\u003e \u003cli\u003eUsing brush, apply a thin, even coat on both surfaces to\u003cbr\u003ebe assembled.\u003c\/li\u003e \u003cli\u003eAllow to set until solvent has evaporated and film is dry.\u003c\/li\u003e \u003cli\u003eAssemble parts. Precoat gaskets or bolts for\u003cbr\u003econvenience in assembling.\u003c\/li\u003e \u003cli\u003eRemove with lacquer thinner.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eGENERAL INFORMATION\u003c\/h6\u003e\u003cbr\u003eThis product is not recommended for use in pure oxygen\u003cbr\u003eand\/or oxygen rich systems and should not be selected as\u003cbr\u003ea sealant for chlorine or other strong oxidizing materials.\u003cbr\u003eFor safe handling information on this product, consult the\u003cbr\u003eMaterial Safety Data Sheet, (MSDS).\u003cbr\u003e\u003ch6\u003eSTORAGE\u003c\/h6\u003e\u003cbr\u003eProducts shall be ideally stored in a cool, dry location in\u003cbr\u003eunopened containers at a temperature between 8_ to 28_C\u003cbr\u003e(46_ to 82_F) unless otherwise labeled. Optimal storage is at\u003cbr\u003ethe lower half of this temperature range. To prevent\u003cbr\u003econtamination of unused product, do not return any material to\u003cbr\u003eits original container.","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552984129825,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/819LVItjL2L._AC_SX522.jpg?v=1687490910"},{"product_id":"permatex-80064-high-tack-spray-a-gasket-sealant","title":"Permatex 80064 High Tack Spray-A-Gasket Sealant","description":"\u003ch2\u003ePermatex 80064 High Tack Spray-A-Gasket Sealant\u003c\/h2\u003e\u003cbr\u003ePermatex High Tack Spray-A-Gasket Sealant is an aerosol product formulated as a sealant that dries quickly to a highly tacky film. The product was specifically designed to hold the heaviest gaskets in place during assembly.\u003cbr\u003e\u003ch6\u003ePRODUCT BENEFITS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eDries fast to a highly tacky, elastomeric film\u003c\/li\u003e \u003cli\u003eRemains tacky indefinitely - can be applied in advance for\u003cbr\u003econvenience in assembly\u003c\/li\u003e \u003cli\u003eHighly resistant to automotive fuels and oils\u003c\/li\u003e \u003cli\u003eSensor safe\u003c\/li\u003e \u003cli\u003eTemperature Range -65°F to 500°F\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eTYPICAL APPLICATIONS\u003c\/h6\u003e\u003cbr\u003eBond and seal any type of cut gasket including:\u003cul\u003e \u003cli\u003eRubber\u003c\/li\u003e \u003cli\u003eCork\u003c\/li\u003e \u003cli\u003eFelt\u003c\/li\u003e \u003cli\u003ePaper\u003c\/li\u003e \u003cli\u003eMetal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eDIRECTIONS FOR USE\u003c\/h6\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eProvide adequate ventilation.\u003c\/li\u003e \u003cli\u003eSurfaces should be free of oil, dirt and grease.\u003c\/li\u003e \u003cli\u003eMask areas that should not be coated.\u003c\/li\u003e \u003cli\u003eShake can with ball agitator for one minute. For best\u003cbr\u003eresults, aerosol can should be at room temperature\u003cbr\u003ebefore spraying.\u003c\/li\u003e \u003cli\u003eHolding can 8 to 10 inches from the surface to be\u003cbr\u003ecoated, press the nozzle and spray the product\u003cbr\u003euniformly. Apply to flange surfaces and both sides of the\u003cbr\u003egasket and the bolt threads. Avoid overspray. For best\u003cbr\u003ecoverage, 2 to 3 light coats are required.\u003c\/li\u003e \u003cli\u003eWait for the solvent to evaporate before assembly.\u003cbr\u003eThe product can be applied in advance and still remain\u003cbr\u003etacky when assembled.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003eNote: Aerosol product will coat 10 to 12 standard valve covers, 3 coats per side.\u003cbr\u003e\u003ch6\u003eFor Cleanup\u003c\/h6\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eTurn can upside-down and spray to clear nozzle.\u003c\/li\u003e \u003cli\u003eClean hands with Permatex\u003cbr\u003ebrand hand cleaners.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eGENERAL INFORMATION\u003c\/h6\u003e\u003cbr\u003eThis product is not recommended for use in pure oxygen\u003cbr\u003eand\/or oxygen rich systems and should not be selected as\u003cbr\u003ea sealant for chlorine or other strong oxidizing materials.\u003cbr\u003eFor safe handling information on this product, consult the\u003cbr\u003eMaterial Safety Data Sheet, (MSDS).\u003cbr\u003e\u003ch6\u003eSTORAGE\u003c\/h6\u003e\u003cbr\u003eProducts shall be ideally stored in a cool, dry location in\u003cbr\u003eunopened containers at a temperature between 8° and 28°C\u003cbr\u003e(46° and 82°F) unless otherwise labeled. Optimal storage is at\u003cbr\u003ethe lower half of this temperature range.","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552984359201,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/81RV6rSldRL._AC_SX466.jpg?v=1687490913"},{"product_id":"permatex-81160-high-temp-red-rtv-silicone-85g","title":"Permatex 81160 High-temp Red RTV Silicone 85G","description":"\u003ch2\u003ePermatex 81160 High-temp Red Rtv Silicone Gasket Maker 85g\u003c\/h2\u003e\u003cbr\u003ePermatex Hi-Temp RTV Silicone Gasket is a single\u003cbr\u003ecomponent, room temperature vulcanizing gasketing\u003cbr\u003ecompound designed to provide reliable “formed-in-place”\u003cbr\u003egaskets for mechanical assemblies. This material cures on\u003cbr\u003eexposure to moisture in the air to form a tough, flexible, silicone\u003cbr\u003erubber gasket. The product resists aging, weathering and\u003cbr\u003ethermal cycling without hardening, shrinking or cracking.\u003cbr\u003eDesigned to maintain maximum performance in a continuous\u003cbr\u003etemperature environment of 600F. OEM Specified.\u003cbr\u003e\u003ch6\u003ePRODUCT BENEFITS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eHigh temperature use\u003c\/li\u003e \u003cli\u003eSuperior adhesion and flexibility\u003c\/li\u003e \u003cli\u003eReplaces most cut gaskets\u003c\/li\u003e \u003cli\u003eCan be used as a gasket maker or dressing\u003c\/li\u003e \u003cli\u003eEasy application\u003c\/li\u003e \u003cli\u003eNon-flammable\u003c\/li\u003e \u003cli\u003eNon-toxic\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eTYPICAL APPLICATIONS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eDrive housings\u003c\/li\u003e \u003cli\u003eExhaust manifolds\u003c\/li\u003e \u003cli\u003eThermostat housings\u003c\/li\u003e \u003cli\u003eValve covers\u003c\/li\u003e \u003cli\u003eTiming gear covers\u003c\/li\u003e \u003cli\u003eWater pumps\u003c\/li\u003e \u003cli\u003eDifferential covers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eDIRECTIONS FOR USE\u003c\/h6\u003e\u003cbr\u003e\u003cstrong\u003eFor assembly as a form-in-place gasket\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eRemove all previous material from mating surfaces.\u003cbr\u003ePermatex Gasket Remover is recommended for most\u003cbr\u003ematerials, not for plastics or painted surfaces.\u003c\/li\u003e \u003cli\u003eFor best results, clean and dry all surfaces with a\u003cbr\u003eresidue-free solvent, such as Permatex Brake and\u003cbr\u003eParts Cleaner.\u003c\/li\u003e \u003cli\u003eCut nozzle to desired bead size, 1\/16“ to 1\/4“ in\u003cbr\u003ediameter. An 1\/8” bead is usually sufficient for most\u003cbr\u003eapplications.\u003c\/li\u003e \u003cli\u003eRemove cap, puncture tube or cartridge seal and attach\u003cbr\u003eextension nozzle.\u003c\/li\u003e \u003cli\u003eApply a continuous and even bead of silicone to one\u003cbr\u003esurface, first tracing the internal areas of the gasket\u003cbr\u003econfiguration, then all surrounding bolt holes\u003c\/li\u003e \u003cli\u003eAssemble parts immediately while silicone is still wet.\u003c\/li\u003e \u003cli\u003eFinger tighten flange only until material begins to seep\u003cbr\u003eout the sides of the flange.\u003c\/li\u003e \u003cli\u003eAllow to set for at least two hours and re-torque at lease\u003cbr\u003eone quarter to one half turn.\u003c\/li\u003e \u003cli\u003eFor best results, allow to cure overnight\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003cstrong\u003eFor assembly as a gasket dressing\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eRepeat steps 1 thru 4 as in previous section.\u003c\/li\u003e \u003cli\u003eApply a thin film of silicone to one surface to be\u003cbr\u003esealed.\u003c\/li\u003e \u003cli\u003ePlace the pre-cut gasket onto silicone film.\u003c\/li\u003e \u003cli\u003eApply a second thin to pre-cut gasket surface.\u003c\/li\u003e \u003cli\u003eRemove any excess and assemble parts immediately.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003cem\u003eNote: Product not recommended for use as a cylinder\u003c\/em\u003e\u003cbr\u003e\u003cem\u003ehead gasket or head gasket sealant.\u003c\/em\u003e\u003cbr\u003e\u003ch6\u003eInstructions for PowerBead\u003c\/h6\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eClean and dry all flange surfaces to be sealed.\u003c\/li\u003e \u003cli\u003eRemove black cap from top of extension nozzle.\u003c\/li\u003e \u003cli\u003eTurn nozzle extension one complete turn (360)\u003cbr\u003ecounterclockwise.\u003c\/li\u003e \u003cli\u003eDepress finger trigger and apply a continuous 1\/16 inch\u003cbr\u003eto 1\/8 inch PowerBead to one surface.\u003c\/li\u003e \u003cli\u003eAssemble parts immediately while silicone is still wet.\u003c\/li\u003e \u003cli\u003eFinger tighten flange only until material begins to seep\u003cbr\u003eout the sides of the flange.\u003c\/li\u003e \u003cli\u003eAllow to set for at least two hours and re-torque at least\u003cbr\u003eone quarter to one half turn.\u003c\/li\u003e \u003cli\u003eFor best results, allow to cure overnight.\u003c\/li\u003e \u003cli\u003eTo close, turn extension nozzle clockwise until tight\u003cbr\u003e(about one full turn). Wipe off excess material from\u003cbr\u003enozzle and replace black cap.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003cstrong\u003eStorage of Unused Product\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eCreate a “Silicone Plug” by allowing excess material to\u003cbr\u003eextend beyond the extension nozzle or aerosol tip to\u003cbr\u003ecure, sealing and protecting the remaining product from\u003cbr\u003emoisture. For reuse, simply remove the cured product\u003cbr\u003efrom the tip.\u003c\/li\u003e \u003cli\u003eFor PowerBead dispensers, you may store remaining\u003cbr\u003eproduct using either the above “silicone plug” method\u003cbr\u003eor using the included plastic cap\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eFor Cleanup\u003c\/h6\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eRemove uncured product from parts and hand-tools\u003cbr\u003ewith Permatex® Brake and Parts Cleaner. If skinned\u003cbr\u003eover, break film with a dry cloth to remove as much as\u003cbr\u003epossible. Remove the remaining material with\u003cbr\u003ePermatex® Gasket Remover.\u003c\/li\u003e \u003cli\u003eClean hands with a dry cloth or Permatex Fast\u003cbr\u003eOrange hand cleaner.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eTYPICAL CURING PERFORMANCE\u003c\/h6\u003e\u003cbr\u003ePermatex Hi-Temp RTV Silicone Gasket cures on exposure to\u003cbr\u003emoisture in the air. The product dries tack free in one hour and\u003cbr\u003efully cures in 24 hours. Cure times will vary with temperature,\u003cbr\u003ehumidity and gap. Note: The curing process can cause\u003cbr\u003ecorrosion to some surfaces, for critical applications use the Ultra\u003cbr\u003eSeries silicones.\u003cbr\u003e\u003ch6\u003eChemical \/ Solvent Resistance\u003c\/h6\u003e\u003cbr\u003eThe product retains effective properties in contact with\u003cbr\u003eautomotive fluids, such as motor oil, transmission fluids,\u003cbr\u003ealcohol, and antifreeze solutions. Note: Not recommended for\u003cbr\u003eparts in contact with gasoline.\u003cbr\u003e\u003ch6\u003eGENERAL INFORMATION\u003c\/h6\u003e\u003cbr\u003eThis product is not recommended for use in pure oxygen\u003cbr\u003eand\/or oxygen rich systems and should not be selected as\u003cbr\u003ea sealant for chlorine or other strong oxidizing materials.\u003cbr\u003eFor safe handling information on this product, consult the\u003cbr\u003eMaterial Safety Data Sheet, (MSDS).\u003cbr\u003e\u003ch6\u003eSTORAGE\u003c\/h6\u003e\u003cbr\u003eProducts shall be ideally stored in a cool, dry location in\u003cbr\u003eunopened containers at a temperature between 8 to 28C\u003cbr\u003e(46 to 82F) unless otherwise labeled. Optimal storage is at the\u003cbr\u003elower half of this temperature range. To prevent contamination\u003cbr\u003eof unused product, do not return any material to its original\u003cbr\u003econtainer.","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552986128673,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/permatex-high-temp-red-rtv-silicone-gasket-maker-85g-ncim_600.jpg?v=1687490957"},{"product_id":"permatex-81409-high-temp-red-rtv-silicone-311g","title":"Permatex 81409 High-temp Red RTV Silicone 311g","description":"\u003ch2\u003ePermatex 81409 High-temp Red Rtv Silicone Gasket Maker 311g\u003c\/h2\u003e\u003cbr\u003ePermatex Hi-Temp RTV Silicone Gasket is a single\u003cbr\u003ecomponent, room temperature vulcanizing gasketing\u003cbr\u003ecompound designed to provide reliable “formed-in-place”\u003cbr\u003egaskets for mechanical assemblies. This material cures on\u003cbr\u003eexposure to moisture in the air to form a tough, flexible, silicone\u003cbr\u003erubber gasket. The product resists aging, weathering and\u003cbr\u003ethermal cycling without hardening, shrinking or cracking.\u003cbr\u003eDesigned to maintain maximum performance in a continuous\u003cbr\u003etemperature environment of 600F. OEM Specified.\u003cbr\u003e\u003ch6\u003ePRODUCT BENEFITS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eHigh temperature use\u003c\/li\u003e \u003cli\u003eSuperior adhesion and flexibility\u003c\/li\u003e \u003cli\u003eReplaces most cut gaskets\u003c\/li\u003e \u003cli\u003eCan be used as a gasket maker or dressing\u003c\/li\u003e \u003cli\u003eEasy application\u003c\/li\u003e \u003cli\u003eNon-flammable\u003c\/li\u003e \u003cli\u003eNon-toxic\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eTYPICAL APPLICATIONS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eDrive housings\u003c\/li\u003e \u003cli\u003eExhaust manifolds\u003c\/li\u003e \u003cli\u003eThermostat housings\u003c\/li\u003e \u003cli\u003eValve covers\u003c\/li\u003e \u003cli\u003eTiming gear covers\u003c\/li\u003e \u003cli\u003eWater pumps\u003c\/li\u003e \u003cli\u003eDifferential covers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eDIRECTIONS FOR USE\u003c\/h6\u003e\u003cbr\u003e\u003cstrong\u003eFor assembly as a form-in-place gasket\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eRemove all previous material from mating surfaces.\u003cbr\u003ePermatex Gasket Remover is recommended for most\u003cbr\u003ematerials, not for plastics or painted surfaces.\u003c\/li\u003e \u003cli\u003eFor best results, clean and dry all surfaces with a\u003cbr\u003eresidue-free solvent, such as Permatex Brake and\u003cbr\u003eParts Cleaner.\u003c\/li\u003e \u003cli\u003eCut nozzle to desired bead size, 1\/16“ to 1\/4“ in\u003cbr\u003ediameter. An 1\/8” bead is usually sufficient for most\u003cbr\u003eapplications.\u003c\/li\u003e \u003cli\u003eRemove cap, puncture tube or cartridge seal and attach\u003cbr\u003eextension nozzle.\u003c\/li\u003e \u003cli\u003eApply a continuous and even bead of silicone to one\u003cbr\u003esurface, first tracing the internal areas of the gasket\u003cbr\u003econfiguration, then all surrounding bolt holes\u003c\/li\u003e \u003cli\u003eAssemble parts immediately while silicone is still wet.\u003c\/li\u003e \u003cli\u003eFinger tighten flange only until material begins to seep\u003cbr\u003eout the sides of the flange.\u003c\/li\u003e \u003cli\u003eAllow to set for at least two hours and re-torque at lease\u003cbr\u003eone quarter to one half turn.\u003c\/li\u003e \u003cli\u003eFor best results, allow to cure overnight\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003cstrong\u003eFor assembly as a gasket dressing\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eRepeat steps 1 thru 4 as in previous section.\u003c\/li\u003e \u003cli\u003eApply a thin film of silicone to one surface to be\u003cbr\u003esealed.\u003c\/li\u003e \u003cli\u003ePlace the pre-cut gasket onto silicone film.\u003c\/li\u003e \u003cli\u003eApply a second thin to pre-cut gasket surface.\u003c\/li\u003e \u003cli\u003eRemove any excess and assemble parts immediately.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003cem\u003eNote: Product not recommended for use as a cylinder\u003c\/em\u003e\u003cbr\u003e\u003cem\u003ehead gasket or head gasket sealant.\u003c\/em\u003e\u003cbr\u003e\u003ch6\u003eInstructions for PowerBead\u003c\/h6\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eClean and dry all flange surfaces to be sealed.\u003c\/li\u003e \u003cli\u003eRemove black cap from top of extension nozzle.\u003c\/li\u003e \u003cli\u003eTurn nozzle extension one complete turn (360)\u003cbr\u003ecounterclockwise.\u003c\/li\u003e \u003cli\u003eDepress finger trigger and apply a continuous 1\/16 inch\u003cbr\u003eto 1\/8 inch PowerBead to one surface.\u003c\/li\u003e \u003cli\u003eAssemble parts immediately while silicone is still wet.\u003c\/li\u003e \u003cli\u003eFinger tighten flange only until material begins to seep\u003cbr\u003eout the sides of the flange.\u003c\/li\u003e \u003cli\u003eAllow to set for at least two hours and re-torque at least\u003cbr\u003eone quarter to one half turn.\u003c\/li\u003e \u003cli\u003eFor best results, allow to cure overnight.\u003c\/li\u003e \u003cli\u003eTo close, turn extension nozzle clockwise until tight\u003cbr\u003e(about one full turn). Wipe off excess material from\u003cbr\u003enozzle and replace black cap.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003cstrong\u003eStorage of Unused Product\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eCreate a “Silicone Plug” by allowing excess material to\u003cbr\u003eextend beyond the extension nozzle or aerosol tip to\u003cbr\u003ecure, sealing and protecting the remaining product from\u003cbr\u003emoisture. For reuse, simply remove the cured product\u003cbr\u003efrom the tip.\u003c\/li\u003e \u003cli\u003eFor PowerBead dispensers, you may store remaining\u003cbr\u003eproduct using either the above “silicone plug” method\u003cbr\u003eor using the included plastic cap\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eFor Cleanup\u003c\/h6\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eRemove uncured product from parts and hand-tools\u003cbr\u003ewith Permatex® Brake and Parts Cleaner. If skinned\u003cbr\u003eover, break film with a dry cloth to remove as much as\u003cbr\u003epossible. Remove the remaining material with\u003cbr\u003ePermatex® Gasket Remover.\u003c\/li\u003e \u003cli\u003eClean hands with a dry cloth or Permatex Fast\u003cbr\u003eOrange hand cleaner.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eTYPICAL CURING PERFORMANCE\u003c\/h6\u003e\u003cbr\u003ePermatex Hi-Temp RTV Silicone Gasket cures on exposure to\u003cbr\u003emoisture in the air. The product dries tack free in one hour and\u003cbr\u003efully cures in 24 hours. Cure times will vary with temperature,\u003cbr\u003ehumidity and gap. Note: The curing process can cause\u003cbr\u003ecorrosion to some surfaces, for critical applications use the Ultra\u003cbr\u003eSeries silicones.\u003cbr\u003e\u003ch6\u003eChemical \/ Solvent Resistance\u003c\/h6\u003e\u003cbr\u003eThe product retains effective properties in contact with\u003cbr\u003eautomotive fluids, such as motor oil, transmission fluids,\u003cbr\u003ealcohol, and antifreeze solutions. Note: Not recommended for\u003cbr\u003eparts in contact with gasoline.\u003cbr\u003e\u003ch6\u003eGENERAL INFORMATION\u003c\/h6\u003e\u003cbr\u003eThis product is not recommended for use in pure oxygen\u003cbr\u003eand\/or oxygen rich systems and should not be selected as\u003cbr\u003ea sealant for chlorine or other strong oxidizing materials.\u003cbr\u003eFor safe handling information on this product, consult the\u003cbr\u003eMaterial Safety Data Sheet, (MSDS).\u003cbr\u003e\u003ch6\u003eSTORAGE\u003c\/h6\u003e\u003cbr\u003eProducts shall be ideally stored in a cool, dry location in\u003cbr\u003eunopened containers at a temperature between 8 to 28C\u003cbr\u003e(46 to 82F) unless otherwise labeled. Optimal storage is at the\u003cbr\u003elower half of this temperature range. To prevent contamination\u003cbr\u003eof unused product, do not return any material to its original\u003cbr\u003econtainer.","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552986390817,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/permatex-high-temp-red-rtv-silicone-gasket-maker-311g-eg85_600.jpg?v=1687490960"},{"product_id":"permatex-heavy-duty-rubberized-undercoating-454g","title":"Permatex Heavy-duty Rubberized Undercoating 454g","description":"\u003ch2\u003ePermatex Heavy-duty Rubberized Undercoating 454g\u003c\/h2\u003e\u003cbr\u003ePermatex Heavy Duty Rubberized Undercoating is specially\u003cbr\u003eformulated to protect automotive underbodies from corrosion.\u003cbr\u003eThe product dries to a firm, flexible, tack-free film has good\u003cbr\u003eabrasion resistance and effective sound-deadening properties.\u003cbr\u003eRubberized for maximum thickness, durability and flexibility.\u003cbr\u003e\u003ch6\u003ePRODUCT BENEFITS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eSeals\u003c\/li\u003e \u003cli\u003eResists chipping\u003c\/li\u003e \u003cli\u003eInsulates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eTYPICAL APPLICATIONS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eAutomotive frames and under-bodies\u003c\/li\u003e \u003cli\u003eRocker panels\u003c\/li\u003e \u003cli\u003eWheel wells\u003c\/li\u003e \u003cli\u003eRust holes\u003c\/li\u003e \u003cli\u003eGutters, roofs, drain systems\u003c\/li\u003e \u003cli\u003eDriveway cracks\u003c\/li\u003e \u003cli\u003ePost preserving\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eDIRECTIONS FOR USE\u003c\/h6\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eProvide adequate ventilation.\u003c\/li\u003e \u003cli\u003eFor best results, apply to clean, dry surfaces.\u003c\/li\u003e \u003cli\u003eTap bottom of can to loosen the ball agitator. Shake can\u003cbr\u003efor 2 minutes. For best results, aerosol can should be at\u003cbr\u003eroom temperature before spraying.\u003c\/li\u003e \u003cli\u003eApply a uniform coating holding the can 10 to 12 inches\u003cbr\u003efrom the surface to be coated.\u003c\/li\u003e \u003cli\u003eMultiple coatings are effective. Allow 15 to 20 minutes\u003cbr\u003ebetween coats. Recommend a minimum of 2 coats.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003cstrong\u003eNote: Avoid spraying product on exhaust system.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eThis product is NOT considered paintable.\u003c\/strong\u003e\u003cbr\u003e\u003ch6\u003eFor Cleanup\u003c\/h6\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eTurn can upside-down and spray to clear nozzle.\u003c\/li\u003e \u003cli\u003eExcess material can be removed with mineral sprits.\u003c\/li\u003e \u003cli\u003eClean hands with Permatex brand hand cleaners.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eGENERAL INFORMATION\u003c\/h6\u003e\u003cbr\u003eThis product is not recommended for use in pure oxygen\u003cbr\u003eand\/or oxygen rich systems and should not be selected as\u003cbr\u003ea sealant for chlorine or other strong oxidizing materials.\u003cbr\u003eFor safe handling information on this product, consult the\u003cbr\u003eMaterial Safety Data Sheet, (MSDS).\u003cbr\u003e\u003ch6\u003eSTORAGE\u003c\/h6\u003e\u003cbr\u003eProducts shall be ideally stored in a cool, dry location in\u003cbr\u003eunopened containers at a temperature between 8 to 28C\u003cbr\u003e(46 to 82F) unless otherwise labeled. Optimal storage is at the\u003cbr\u003elower half of this temperature range.","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552986521889,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/permatex-heavy-duty-rubberized-undercoating-454g-9otm_600.jpg?v=1687490965"},{"product_id":"permatex-81724-ultra-blue-multipurpose-rtv-silicone-95g","title":"Permatex 81724 Ultra Blue Multipurpose RTV Silicone 95g","description":"\u003ch2\u003ePermatex 81724 Ultra Blue Multipurpose Rtv Silicone 95g\u003c\/h2\u003e\u003cbr\u003ePermatex Ultra Blue RTV Silicone Gasket is a single\u003cbr\u003ecomponent, room temperature vulcanizing gasketing\u003cbr\u003ecompound designed to provide reliable “formed-in-place”\u003cbr\u003egaskets for mechanical assemblies. This material cures on\u003cbr\u003eexposure to moisture in the air to form a tough, flexible,\u003cbr\u003esilicone rubber gasket. The product resists aging, weathering\u003cbr\u003eand thermal cycling without hardening, shrinking or cracking.\u003cbr\u003eDesigned for superior bonding properties to oil contaminated\u003cbr\u003emetals as compared to other formed-in-place gaskets, and\u003cbr\u003emaintains outstanding oil resistance. NSF White Book\u003cbr\u003eregistered.\u003cbr\u003e\u003ch6\u003ePRODUCT BENEFITS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eSensor safe, non-corrosive\u003c\/li\u003e \u003cli\u003eSuperior adhesion and flexibility\u003c\/li\u003e \u003cli\u003eImproved oil resistance\u003c\/li\u003e \u003cli\u003eReplaces most cut gaskets\u003c\/li\u003e \u003cli\u003eLow odor\u003c\/li\u003e \u003cli\u003eCan be used as a gasket maker or dressing\u003c\/li\u003e \u003cli\u003eNon-flammable, Non-toxic\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eTYPICAL APPLICATIONS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003ePump housings\u003c\/li\u003e \u003cli\u003eMachine tools\u003c\/li\u003e \u003cli\u003eCompressors\u003c\/li\u003e \u003cli\u003eGearboxes\u003c\/li\u003e \u003cli\u003eTransmission pans\u003c\/li\u003e \u003cli\u003eValve covers\u003c\/li\u003e \u003cli\u003eOil pans\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eDIRECTIONS FOR USE\u003c\/h6\u003e\u003cbr\u003e\u003cstrong\u003eFor assembly as form-in-place gasket\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eRemove all previous material from mating surfaces.\u003cbr\u003ePermatex Gasket Remover is recommended for most\u003cbr\u003ematerials.\u003c\/li\u003e \u003cli\u003eFor best results, clean and dry all surfaces with a\u003cbr\u003eresidue-free solvent, such as Permatex Brake and\u003cbr\u003eParts Cleaner.\u003c\/li\u003e \u003cli\u003eCut nozzle to desired bead size, 1\/16“ to 1\/4“ in\u003cbr\u003ediameter. A 1\/8” bead is usually sufficient for most\u003cbr\u003eapplications.\u003c\/li\u003e \u003cli\u003eRemove cap, puncture tube or cartridge seal and attach\u003cbr\u003eextension nozzle.\u003c\/li\u003e \u003cli\u003eApply a continuous 1\/16 inch to 1\/8 inch bead of silicone\u003cbr\u003eto one surface, first tracing the internal areas of the\u003cbr\u003egasket configuration, then all surrounding bolt holes.\u003c\/li\u003e \u003cli\u003eAssemble parts immediately while silicone is still wet.\u003c\/li\u003e \u003cli\u003eFinger tighten flange only until material begins to seep\u003cbr\u003eout the sides of the flange.\u003c\/li\u003e \u003cli\u003eAllow to set for at least two hours and re-torque at lease\u003cbr\u003eone quarter to one half turn.\u003c\/li\u003e \u003cli\u003eFor best results, allow to cure overnight.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003cstrong\u003eFor assembly as gasket dressing\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eRepeat steps 1 thru 4 as in previous section.\u003c\/li\u003e \u003cli\u003eApply a thin film of silicone to one surface to be sealed.\u003c\/li\u003e \u003cli\u003ePlace the pre-cut gasket onto silicone film.\u003c\/li\u003e \u003cli\u003eApply a second thin film to pre-cut gasket surface.\u003c\/li\u003e \u003cli\u003eRemove any excess and assemble parts immediately.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003cem\u003eNote: Product not recommended for use as a cylinder\u003c\/em\u003e\u003cbr\u003e\u003cem\u003ehead gasket or head gasket sealant.\u003c\/em\u003e\u003cbr\u003e\u003ch6\u003eInstructions for PowerBead\u003c\/h6\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eClean and dry all flange surfaces to be sealed.\u003c\/li\u003e \u003cli\u003eRemove black cap from top of extension nozzle.\u003c\/li\u003e \u003cli\u003eTurn nozzle extension one complete turn (360)\u003cbr\u003ecounterclockwise.\u003c\/li\u003e \u003cli\u003eDepress finger trigger and apply a continuous 1\/16 inch\u003cbr\u003eto 1\/8 inch PowerBead to one surface.\u003c\/li\u003e \u003cli\u003eAssemble parts immediately while silicone is still wet.\u003c\/li\u003e \u003cli\u003eFinger tighten flange only until material begins to seep\u003cbr\u003eout the sides of the flange.\u003c\/li\u003e \u003cli\u003eAllow to set for at least two hours and re-torque at least\u003cbr\u003eone quarter to one half turn.\u003c\/li\u003e \u003cli\u003eFor best results, allow to cure overnight.\u003c\/li\u003e \u003cli\u003eTo close, turn extension nozzle clockwise until tight\u003cbr\u003e(about one full turn). Wipe off excess material from\u003cbr\u003enozzle and replace black cap.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eFor Cleanup\u003c\/h6\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eRemove uncured product from parts and hand-tools with\u003cbr\u003ePermatex® Fast Orange® Wipes or Fast Orange® Hand\u003cbr\u003eCleaners. If skinned over, break film with a dry cloth to\u003cbr\u003eremove as much as possible. Remove the remaining\u003cbr\u003ematerial with Permatex® Gasket Remover.\u003c\/li\u003e \u003cli\u003eClean hands with a dry cloth or Permatex Fast Orange\u003cbr\u003ehand cleaner.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eStorage of Unused Product\u003c\/h6\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eCreate a “Silicone Plug” by allowing excess material to\u003cbr\u003eextend beyond the extension nozzle or aerosol tip to\u003cbr\u003ecure, sealing and protecting the remaining product from\u003cbr\u003emoisture. For reuse, simply remove the cured product\u003cbr\u003efrom the tip.\u003c\/li\u003e \u003cli\u003eFor PowerBead dispensers, you may store remaining\u003cbr\u003eproduct using either the above “silicone plug” method or\u003cbr\u003eusing the included plastic cap.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eTYPICAL CURING PERFORMANCE\u003c\/h6\u003e\u003cbr\u003ePermatex Ultra Blue No-Leak RTV Silicone Gasket cures on\u003cbr\u003eexposure to moisture in the air. The product dries tack free in\u003cbr\u003etwo hours and fully cures in 24 hours. Cure times will vary\u003cbr\u003ewith temperature, humidity and gap.\u003cbr\u003e\u003ch6\u003eChemical \/ Solvent Resistance\u003c\/h6\u003e\u003cbr\u003eThe product retains effective properties in contact with\u003cbr\u003eautomotive fluids, such as motor oil, transmission fluids,\u003cbr\u003ealcohol and antifreeze solutions. Note: Not recommended for\u003cbr\u003eparts in contact with gasoline.\u003cbr\u003e\u003ch6\u003eGENERAL INFORMATION\u003c\/h6\u003e\u003cbr\u003eThis product is not recommended for use in pure oxygen\u003cbr\u003eand\/or oxygen rich systems and should not be selected as\u003cbr\u003ea sealant for chlorine or other strong oxidizing materials.\u003cbr\u003eFor safe handling information on this product, consult the\u003cbr\u003eMaterial Safety Data Sheet, (MSDS).\u003cbr\u003e\u003ch6\u003eSTORAGE\u003c\/h6\u003e\u003cbr\u003eProducts shall be ideally stored in a cool, dry location in\u003cbr\u003eunopened containers at a temperature between 8 to 28C\u003cbr\u003e(46 to 82F) unless otherwise labeled. Optimal storage is at\u003cbr\u003ethe lower half of this temperature range. To prevent\u003cbr\u003econtamination of unused product, do not return any material to\u003cbr\u003eits original container.","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552986685729,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/permatex-ultra-blue-multipurpose-rtv-silicone-gasket-maker-95g-xa51_600.jpg?v=1687490968"},{"product_id":"permatex-81730-windshield-glass-sealer","title":"Permatex 81730 Windshield \u0026 Glass Sealer","description":"\u003ch2\u003ePermatex Flowable Silicone Windshield \u0026amp; Glass Sealer 42g\u003c\/h2\u003e\u003cbr\u003ePermatex® Flowable Silicone Windshield and Glass Sealer is a\u003cbr\u003esolventless, flowable silicone RTV designed to flow into cracks\u003cbr\u003eand seams to form a clear, tough flexible seal. It flows into\u003cbr\u003ehidden and hard-to-reach areas. It cures to a tough\u003cbr\u003ewaterproof, durable, clear seal that is resistant to weather,\u003cbr\u003eextreme temperatures, vibration, shock and most shop\u003cbr\u003echemicals.\u003cbr\u003e\u003ch6\u003ePRODUCT BENEFITS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eEasy to use\u003c\/li\u003e \u003cli\u003eFlowable\u003c\/li\u003e \u003cli\u003eTemperature range -80ºF to 450ºF\u003c\/li\u003e \u003cli\u003eWaterproof\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eTYPICAL APPLICATIONS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eWindshields\u003c\/li\u003e \u003cli\u003eSunroofs\u003c\/li\u003e \u003cli\u003eWindows\u003c\/li\u003e \u003cli\u003eHeadlamp assemblies\u003c\/li\u003e \u003cli\u003eMarine glass\u003c\/li\u003e \u003cli\u003eRV vents and windows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eDIRECTIONS FOR USE\u003c\/h6\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eLocate source of leak.\u003c\/li\u003e \u003cli\u003eClean and dry surfaces with alcohol.\u003c\/li\u003e \u003cli\u003eApply Permatex® Flowable Silicone Windshield and\u003cbr\u003eGlass Sealer into the leak source; allow time for\u003cbr\u003epenetration.\u003c\/li\u003e \u003cli\u003eWipe off excess sealant with clean rag.\u003c\/li\u003e \u003cli\u003eSealant is tack-free in one hour. Full cure within 24\u003cbr\u003ehours\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eGENERAL INFORMATION\u003c\/h6\u003e\u003cbr\u003eThis product is not recommended for use in pure oxygen\u003cbr\u003eand\/or oxygen rich systems and should not be selected as\u003cbr\u003ea sealant for chlorine or other strong oxidizing materials.\u003cbr\u003eFor safe handling information on this product, consult the\u003cbr\u003eMaterial Safety Data Sheet, (MSDS).\u003cbr\u003e\u003ch6\u003eSTORAGE\u003c\/h6\u003e\u003cbr\u003eProducts shall be ideally stored in a cool, dry location in\u003cbr\u003eunopened containers at a temperature between 8 to 28C\u003cbr\u003e(46 to 82F) unless otherwise labeled. Optimal storage is at\u003cbr\u003ethe lower half of this temperature range. To prevent\u003cbr\u003econtamination of unused product, do not return any material to\u003cbr\u003eits original container.","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552987799841,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/permatex-flowable-silicone-windshield-glass-sealer-42g-wm9c_600.jpg?v=1687490971"},{"product_id":"permatex-81878-ultra-copper-rtv-silicone","title":"Permatex 81878 Ultra Copper RTV Silicone","description":"\u003ch2\u003ePermatex 81878 Ultra Copper High Temp RTV Silicone\u003c\/h2\u003e\u003cbr\u003ePermatex Ultra Copper is a single component, room temperature vulcanizing gasketing compound designed to provide reliable “formed-in-place” gaskets for mechanical assemblies. This material cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. The product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Permatex Ultra Copper is the most advanced high performance, high temperature (up to 700F intermittent) RTV gasket available.\u003cbr\u003e\u003ch6\u003ePRODUCT BENEFITS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eHigh temperature resistance\u003c\/li\u003e \u003cli\u003eSensor safe, non-corrosive\u003c\/li\u003e \u003cli\u003eSuperior adhesion and flexibility\u003c\/li\u003e \u003cli\u003eReplaces most cut gaskets\u003c\/li\u003e \u003cli\u003eImproved oil resistance\u003c\/li\u003e \u003cli\u003eCan be used as a gasket maker or dressing\u003c\/li\u003e \u003cli\u003eNon-flammable, Non-toxic\u003c\/li\u003e \u003cli\u003eLow odor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eTYPICAL APPLICATIONS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003ePumps\u003c\/li\u003e \u003cli\u003eCompressors\u003c\/li\u003e \u003cli\u003eExhaust manifolds\/headers\u003c\/li\u003e \u003cli\u003eValve covers\u003c\/li\u003e \u003cli\u003eOil pans\u003c\/li\u003e \u003cli\u003eThermostat housings\u003c\/li\u003e \u003cli\u003eGearboxes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eDIRECTIONS FOR USE\u003c\/h6\u003e\u003cbr\u003e\u003cstrong\u003eFor assembly as form-in-place gasket\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eRemove all previous material from mating surfaces. Permatex Silicone Stripper or Gasket Remover is recommended for most materials.\u003c\/li\u003e \u003cli\u003eFor best results, clean and dry all surfaces with a residue-free solvent, such as Permatex Brake and Parts Cleaner.\u003c\/li\u003e \u003cli\u003eCut nozzle to desired bead size, 1\/16 “ to 1\/4 “ in diameter. An 1\/8” bead is usually sufficient for most applications.\u003c\/li\u003e \u003cli\u003eRemove cap, puncture tube or cartridge seal and attach extension nozzle.\u003c\/li\u003e \u003cli\u003eApply a continuous and even bead of silicone to one surface, first tracing the internal areas of the gasket configuration, then all surrounding bolt holes as shown below:\u003c\/li\u003e \u003cli\u003eAssemble parts immediately while silicone is still wet. Secure or tighten to recommended torque specs.\u003c\/li\u003e \u003cli\u003eRe-torque will not be necessary after the product has cured.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003cstrong\u003eFor assembly as a gasket dressing\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eRepeat steps 1 through 4 as in previous section.\u003c\/li\u003e \u003cli\u003eApply a thin film of silicone to one surface to be sealed.\u003c\/li\u003e \u003cli\u003ePlace the pre-cut gasket onto silicone film.\u003c\/li\u003e \u003cli\u003eApply a second thin film to pre-cut gasket surface.\u003c\/li\u003e \u003cli\u003eRemove any excess and assemble parts immediately.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003cem\u003eNote: Product is not recommended for use as a cylinder head gasket or head gasket sealant.\u003c\/em\u003e\u003cbr\u003e\u003ch6\u003eInstructions for PowerBead\u003c\/h6\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eClean and dry all flange surfaces to be sealed.\u003c\/li\u003e \u003cli\u003eRemove black cap from top of extension nozzle.\u003c\/li\u003e \u003cli\u003eTurn nozzle extension one complete turn (360) counterclockwise.\u003c\/li\u003e \u003cli\u003eDepress finger trigger and apply a continuous 1\/16 inch to 1\/8 inch PowerBead to one surface.\u003c\/li\u003e \u003cli\u003eAssemble parts immediately while silicone is still wet.\u003c\/li\u003e \u003cli\u003eFinger tighten flange only until material begins to seep out the sides of the flange.\u003c\/li\u003e \u003cli\u003eAllow to set for at least two hours and re-torque at least one quarter to one half turn.\u003c\/li\u003e \u003cli\u003eFor best results, allow to cure overnight.\u003c\/li\u003e \u003cli\u003eTo close, turn extension nozzle clockwise until tight (about one full turn). Wipe off excess material from nozzle and replace black cap.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eStorage of Unused Product\u003c\/h6\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eCreate a “Silicone Plug” by allowing excess material to extend beyond the extension nozzle or aerosol tip to cure, sealing and protecting the remaining product from moisture. For reuse, simply remove the cured product from the tip.\u003c\/li\u003e \u003cli\u003eFor PowerBead dispensers, you may store remaining product using either the above “silicone plug” method or using the included plastic cap.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eFor Cleanup\u003c\/h6\u003e\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \u003cli\u003eRemove uncured product from parts and hand-tools with Permatex® Fast Orange® Wipes or Fast Orange® Hand Cleaners. If skinned over, break film with a dry cloth to remove as much as possible. Remove the remaining material with Permatex® Gasket Remover.\u003c\/li\u003e \u003cli\u003eClean hands with a dry cloth or Permatex® Fast Orange Hand Cleaner.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cbr\u003e\u003ch6\u003eTYPICAL CURING PERFORMANCE\u003c\/h6\u003e\u003cbr\u003ePermatex Ultra Copper Hi-Temp RTV Silicone Gasket cures on exposure to moisture in the air. The product dries tack free in one hour and fully cures in 24 hours. Cure times will vary with temperature, humidity and gap.\u003cbr\u003e\u003ch6\u003eChemical \/ Solvent Resistance\u003c\/h6\u003e\u003cbr\u003eThe product retains effective properties in contact with most shop fluids, automotive fluids, such as motor oil, transmission fluids, alcohol and antifreeze solutions. Note: Not recommended for parts in contact with gasoline.\u003cbr\u003e\u003ch6\u003eGENERAL INFORMATION\u003c\/h6\u003e\u003cbr\u003eThis product is not recommended for use in pure oxygen\u003cbr\u003eand\/or oxygen rich systems and should not be selected as\u003cbr\u003ea sealant for chlorine or other strong oxidizing materials.\u003cbr\u003eFor safe handling information on this product, consult the\u003cbr\u003eMaterial Safety Data Sheet, (MSDS).\u003cbr\u003e\u003ch6\u003eSTORAGE\u003c\/h6\u003e\u003cbr\u003eProducts shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8 to 28C (46 to 82F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range. To prevent contamination of unused product, do not return any material to its original container.","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552987832609,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/81IjON27mL._SX425.jpg?v=1687490975"}],"url":"https:\/\/www.hongteckhin.com.sg\/vi\/collections\/gasketing.oembed?page=3","provider":"Hong Teck Hin","version":"1.0","type":"link"}