{"product_id":"loctite-675-retaining-compound","title":"Loctite 675 Retaining Compound","description":"\u003ch2\u003eLoctite 675 High Strength Slow Cure Retaining Compound 50ml\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eShear Strength : 20 N\/mm²\u003c\/li\u003e \u003cli\u003eViscosity : 100-150 mPa.s (cP) Brookfield\u003c\/li\u003e \u003cli\u003eKey Substrates : Steel\u003c\/li\u003e \u003cli\u003eColor : Green\u003c\/li\u003e \u003cli\u003eCuring Type : Anaerobic\u003c\/li\u003e \u003cli\u003eApplication : Retaining\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cp class=\"md-block-unstyled\"\u003eLOCTITE 675 is a green, very low viscosity, high strength, slow curing methacrylate retaining compound. Fixture time on steel is 45 min. Maximum diametrical clearance is 0.1 mm and service temperature -55 to + 150ºC. Ideal for close fitting press fit and loose fitting slip fit applications.\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"md-block-unstyled\"\u003eGreen, high strength, slow curing methacrylate retaining compound for close fitting press fit and loose fitting slip fit applications.\u003c\/p\u003e\u003cul\u003e \u003cli\u003e1-part product, requires no mixing\u003c\/li\u003e \u003cli\u003eHigh strength, very low viscosity\u003c\/li\u003e \u003cli\u003eSlow curing\u003c\/li\u003e \u003cli\u003eIdeal for close fitting press fits\u003c\/li\u003e \u003cli\u003eAlso for loose fitting slip fits\u003c\/li\u003e\n\u003c\/ul\u003eLOCTITE® Product 675 is a general purpose adhesive used\u003cbr\u003eprimarily for joining cylindrical assemblies of all types. It is a\u003cbr\u003elow viscosity, self-hardening adhesive that cures when confined\u003cbr\u003ebetween ferrous or copper alloy metals. On other metals or\u003cbr\u003ethermoset plastics, use of Locquic Primer T or N is required.\u003cbr\u003eThe product’s temperature range is 65ºF to 300ºF.\u003cbr\u003e\u003ch6\u003eTYPICAL APPLICATIONS\u003c\/h6\u003e\u003cul\u003e \u003cli\u003eLocks bearings on shafts and in housings.\u003c\/li\u003e \u003cli\u003eBonds sleeves, wear rings and bushings in place.\u003c\/li\u003e \u003cli\u003eAugments press fits.\u003c\/li\u003e \u003cli\u003eBonds pivot pins, adapters and plugs in place.\u003c\/li\u003e \u003cli\u003eSeals mechanical fits that have small clearances.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003ch6\u003eDirections for Use\u003c\/h6\u003e\u003cbr\u003eFor best performance, surfaces should be clean and free of\u003cbr\u003egrease. Ensure joint is completely filled with adhesive. For slip\u003cbr\u003efitted assemblies, this is achieved by applying adhesive around\u003cbr\u003ethe pin and threading edge of the collar and using a rotating\u003cbr\u003emotion during assembly to ensure good coverage. For press\u003cbr\u003efitted assemblies, the adhesive should be coated onto the pin.\u003cbr\u003eThe collar should then be heated to create sufficient clearance\u003cbr\u003efor free assembly. Parts should not be disturbed until sufficient\u003cbr\u003ehandling strength is achieved. This grade will develop\u003cbr\u003etemperature resistance after exposure to a heat cure of one\u003cbr\u003ehour at 180ºC or longer times at temperatures above 120ºC in\u003cbr\u003eservice. For more detailed information on using retaining\u003cbr\u003eadhesives, contact your local technical service center.\u003cbr\u003e\u003ch6\u003eGENERAL INFORMATION\u003c\/h6\u003e\u003cbr\u003eThis product is not recommended for use in pure oxygen\u003cbr\u003eand\/or oxygen rich systems and should not be selected as\u003cbr\u003ea sealant for chlorine or other strong oxidizing materials.\u003cbr\u003eFor safe handling information on this product, consult the\u003cbr\u003eSafety Data Sheet (SDS).\u003cbr\u003eWhere aqueous washing systems are used to clean the\u003cbr\u003esurfaces before bonding, it is important to check for compatibility of the washing solution with the adhesive. In\u003cbr\u003esome cases these aqueous washes can affect the cure and\u003cbr\u003eperformance of the adhesive.\u003cbr\u003eThis product is not normally recommended for use on plastics\u003cbr\u003e(particularly thermoplastic materials where stress cracking of\u003cbr\u003ethe plastic could result). Users are recommended to confirm\u003cbr\u003ecompatibility of the product with such substrates.\u003cbr\u003e\u003ch6\u003eStorage\u003c\/h6\u003e\u003cbr\u003eMaximum shelf life may be obtained when material is stored in\u003cbr\u003ea cool, dry location at a temperature of 65ºF (± 15ºF). TO\u003cbr\u003ePREVENT CONTAMINATION OF UNUSED MATERIAL, DO\u003cbr\u003eNOT RETURN ANY PRODUCT TO ITS ORIGINAL\u003cbr\u003eCONTAINER.\u003cbr\u003eFOR SPECIFIC SHELF LIFE\/RECERTIFICATION POLICY\u003cbr\u003eINFORMATION, CONTACT THE LOCTITE CORPORATION,\u003cbr\u003eQUALITY DEPARTMENT, ROCKY HILL, CT 06067,\u003cbr\u003eTELEPHONE (860) 571-5100\u003cbr\u003e\u003ch6\u003eData Ranges\u003c\/h6\u003e\u003cbr\u003eThe data contained herein may be reported as a typical value\u003cbr\u003eand\/or range. Values are based on actual test data and are\u003cbr\u003everified on a periodic basis.","brand":"Hong Teck Hin","offers":[{"title":"Default Title","offer_id":45552919839009,"sku":"","price":0.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/0730\/0641\/products\/loctite-675.jpg?v=1687490121","url":"https:\/\/www.hongteckhin.com.sg\/th\/products\/loctite-675-retaining-compound","provider":"Hong Teck Hin","version":"1.0","type":"link"}