Loctite SF 7039 Contact Cleaner Spray

0.0

Description

Loctite SF 7039 Contact Cleaner Spray 400ml

  • Viscosity : Flow similar to SAE 10 Motor Oil
  • Curing Type : Solvent evaporation
  • Application : Surface preparation
 

LOCTITE SF 7039 is a contact spray cleaner formulated for use on electrical contacts exposed to moisture or other contaminants, without damaging existing varnishes. It leaves a water repellant residue and is typically used in applications with an operating temperature range of -30 °C to +50 °C.

  • For cleaning electrical contacts, relays, switchgear, etc, which are exposed to moisture or other contamination
  • Does not affect insulating varnishes
LOCTITE® SF 7039™ is a contact cleaner spray formulated for
use on electrical contacts without damaging existing varnishes.
It leaves a water repellant residue. This product is used to
clean the electrical contacts which have been exposed to
moisture or other contamination. This product is typically
used in applications with an operating range of -30 °C to +50
°C.
GENERAL INFORMATION

This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Safety Data Sheet (SDS).
Directions for use:


  1. Shake can thoroughly. Spray from a distance of about 20
    to 30 cm onto the area to be treated.
  2. Substrate should be clean and dry.
  3. DO NOT APPLY TO LIVE CIRCUITS.

Not for product specifications

The technical data contained herein are intended as reference
only. Please contact your local quality department for
assistance and recommendations on specifications for this
product.
Storage

Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
Corporation cannot assume responsibility for product which
has been contaminated or stored under conditions other than
those previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representative.
Read More Read Less
Products and Cleaner / Remover

Categories

Loctite

Products Brand

You may also like