Krylon Battery Cleaner 425g

Krylon Battery Cleaner 425g (Discont)

Battery Protector is specially formulated to assure continued high-voltage output by preventing battery terminal corrosion.

Features:

• Helps prolong battery life
• Creates an airtight, waterproof, insulated seal to help minimize leakage.

Hazards identification

• Prevention : Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
  smoking. Do not spray on an open flame or other ignition source. Do not breathe dust
  or mist. Pressurized container: Do not pierce or burn, even after use.
• Response : Get medical attention if you feel unwell
• Storage : Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Store in
  a well-ventilated place.
• Disposal : Dispose of contents and container in accordance with all local, regional, national and
  international regulations
• Supplemental label elements : WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please refer to the SDS for additional information. Keep out of reach of children. Keep upright in a cool, dry place. Do not discard empty can in trash compactor.

Description of necessary first aid measures

• Eye contact : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
  eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10
  minutes. Get medical attention following exposure or if feeling unwell.
• Inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing. If
  not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial
  respiration or oxygen by trained personnel. It may be dangerous to the person providing
  aid to give mouth-to-mouth resuscitation. Get medical attention following exposure or if
  feeling unwell. If unconscious, place in recovery position and get medical attention
  immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt
  or waistband.
• Skin contact : Flush contaminated skin with plenty of water. Remove contaminated clothing and
  shoes. Continue to rinse for at least 10 minutes. Get medical attention following
  exposure or if feeling unwell. Wash clothing before reuse. Clean shoes thoroughly
  before reuse.
• Ingestion : Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and
  keep at rest in a position comfortable for breathing. If material has been swallowed and
  the exposed person is conscious, give small quantities of water to drink. Stop if the
  exposed person feels sick as vomiting may be dangerous. Do not induce vomiting
  unless directed to do so by medical personnel. If vomiting occurs, the head should be
  kept low so that vomit does not enter the lungs. Get medical attention following
  exposure or if feeling unwell. Never give anything by mouth to an unconscious person.
  If unconscious, place in recovery position and get medical attention immediately.

Personal precautions, protective equipment and emergency procedures

• For non-emergency personnel : No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
  entering. In the case of aerosols being ruptured, care should be taken due to the rapid
  escape of the pressurized contents and propellant. If a large number of containers are
  ruptured, treat as a bulk material spillage according to the instructions in the clean-up
  section. Do not touch or walk through spilled material. Shut off all ignition sources. No
  flares, smoking or flames in hazard area. Avoid breathing vapor or mist. Provide
  adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put
  on appropriate personal protective equipment.
• For emergency responders : If specialized clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials. See also the information in "For nonemergency personnel".
• Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental
  pollution (sewers, waterways, soil or air).

Methods and materials for containment and cleaning up

• Small spill : Stop leak if without risk. Move containers from spill area. Use spark-proof tools and
  explosion-proof equipment. Dilute with water and mop up if water-soluble. Alternatively,
  or if water-insoluble, absorb with an inert dry material and place in an appropriate waste
  disposal container. Dispose of via a licensed waste disposal contractor.
• Large spill : Stop leak if without risk. Move containers from spill area. Use spark-proof tools and
  explosion-proof equipment. Approach release from upwind. Prevent entry into sewers,
  water courses, basements or confined areas. Wash spillages into an effluent treatment
  plant or proceed as follows. Contain and collect spillage with non-combustible,
  absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in
  container for disposal according to local regulations (see Section 13). Dispose of via a
  licensed waste disposal contractor. Contaminated absorbent material may pose the
  same hazard as the spilled product. Note: see Section 1 for emergency contact
  information and Section 13 for waste disposal.

Precautions for safe handling

• Protective measures : Put on appropriate personal protective equipment (see Section 8). Pressurized
  container: protect from sunlight and do not expose to temperatures exceeding 50°C. Do
  not pierce or burn, even after use. Do not breathe vapor or mist. Do not ingest. Avoid
  contact with eyes, skin and clothing. Avoid breathing gas. Use only with adequate
  ventilation. Wear appropriate respirator when ventilation is inadequate. Store and use
  away from heat, sparks, open flame or any other ignition source. Use explosion-proof
  electrical (ventilating, lighting and material handling) equipment. Use only non-sparking
  tools. Empty containers retain product residue and can be hazardous
• Advice on general occupational hygiene : Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating,
  drinking and smoking. Remove contaminated clothing and protective equipment before
  entering eating areas. See also Section 8 for additional information on hygiene
  measures.
• Conditions for safe storage, including any incompatibilities : Store in accordance with local regulations. Store away from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Protect from sunlight. Eliminate all ignition sources. Use appropriate containment to avoid environmental contamination. See Section 10 for incompatible
  materials before handling or use.